Bosch Security Systems    Fairport, NY 14450 9199
Feb 09, 2012 Equipped with central control unit capable of controlling up to 245 wired and 245 wireless delegate units, DCN Wireless System provides 128-bit AES Rijndael encryption for protection against eavesdropping. Voice activation mode allows microphones to be switched on automatically once delegates begin to speak, enabling spontaneous and open discussions. It is also possible to program list of VIP participants, so they have special privileges and their comments have priority over other delegates.

Ideal Industries, Inc.    Sycamore, IL 60178
Feb 09, 2012 SLK(TM) Disconnect Fuse Kit de-energizes streetlights, parking lot lights, and electrical vehicle charging stations in event of knockdown to prevent potentially life-threatening shock hazards. Listed to UL ECIS category for special purpose connectors, submersible breakaway safety device withstands wet conditions around pole bases, junction boxes, and hand holes. Bright orange material - UL 94V-2 flame rated - features ribs on boots to provide grip and also facilitates identification.

FMC Technologies Inc. Measurement Solutions    Erie, PA 16514
Feb 09, 2012 Immune to external piping forces, Proline® Promass E Coriolis flowmeter is available in 3/8-3 in. sizes for use in liquid or gas measurement and operates from -40 to +284°F. Fit-and-Forget installation eliminates need for long lengths of straight pipe runs or supports/braces for meter. Meter is supplied with model 83 transmitter, which offers 4-line LCD with touch control operation, application-specific quick setup, and measurement display.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Feb 09, 2012 To meet high-pressure measurement demands, Type 6215 incorporates quartz crystal sensing element and front sealed diaphragm in stainless steel housing. Technology allows for low mechanical and thermal stresses on sensor, with no mounting gap and minimized surface pressure within sealing part. Aforementioned traits lend to extended service life and measurement stability as well as precision measurement repeatability. Sensitivity is -0.1 pC/psi with natural frequency of greater than 240 kHz.

Selco Products Co.    Reno, NV 89521-5908
Feb 09, 2012 With 20 A rating at 120/250 Vac, SWTC3 Series accommodates applications requiring thermal cut-outs with high current capabilities. Thermal cutoffs provide reliable upper limit temperature protection, functioning as safety devices to disconnect current to heating element in case of malfunction. Interrupting current rating is 31.5 A at 125/250 Vac, and functioning temperature range is from 162ºF to 464ºF, with holding temperatures from 117 to 392ºF.

Cognex Corp.    Natick, MA 01760 2059
Feb 09, 2012 Packaged in IP65-rated housing for production line use, In-Sight® 500 is powered by Cognex VSoC(TM), which enables image processing at 500 fps with windowed acquisition. Fixed-mount system achieves speeds of 100 fps at 1024 x 768 pixel resolution and 200 fps at 640 x 480. Full suite of In-Sight tools and communication methods is available, including Cognex Connect(TM), which supports EtherNet/IP and PROFINET. In-Sight 500 is suited for part inspection using blob, edge, and histogram functions.

Larson Electronics, LLC    Kemp, TX 75143
Feb 09, 2012 Model EPL-EMG-48-2L-LED fixture provides Class 1 Division 1 protection and instant on operation. Explosion proof light features housing constructed of non-sparking aluminum for durability and resistance to corrosion. Pyrex tubes protect LED bulbs against contamination and impact, while integrally mounted and automatically recharged battery backup system provides 90 min of light operation in case of power failures.

Bosch Corp.    Charleston, SC 29418
Feb 09, 2012 Central control unit (CCU) allows wired and wireless delegate units to be integrated in one system, facilitating extension of DCN Next Generation systems to meet changing needs by adding DCN wireless discussion units. Up to 245 wired and 245 wireless delegate units can be controlled by one CCU, which also offers Ethernet connection to control PC for bridging extended distances without converters. Along with 3 system trunk outputs, CCU offers option to be configured as network controller.

MTC Industries and Research ltd    Karmiel 21611  Israel
Feb 09, 2012 ERSA Redundant Electro-Mechanical Rotary Servo Actuator is designed with built-in fail-safe based on duplicate flight controls located on 2 separate control boards. Back-up control allows UAV to continue flying in case of component failure. Additional features include dual DC brushless motors that minimize maintenance, 3 gang potentiometer, and optional digital or analog output.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Feb 09, 2012 Housed in 4 x 4 x 1 in. industrial steel enclosure for shock and vibration mitigation, 4-port Model USB-104-HUB features data transfer rates up to 480 Mbps and temperature range of -40 to 85°C. Device lets users add USB-based I/O to embedded systems or connect peripherals such as external hard drives, keyboards, GPS, and wireless. Offered in bus-powered and self-powered models, hub offers choice of DC power input jack, screw terminals, or 3.5 in. drive power connector.

Signal Transformer Co., Inc.    Inwood, NY 11096
Feb 09, 2012 Available in low profile versions, SMD Wire Wound Power Inductors exceed industry standards for thermal shock resistance, moisture, and shock/vibration. Single- and dual-winding units feature inductance from 0.01 µH to 10 mH, current ratings from 4 mA to 70 A, and DC resistance from 2 mW to 140 W. With heights ranging from 1-12.3 mm, shielded and unshielded devices are suited for DC/DC converters, switching power supplies, telecommunications equipment, computers, and printers.

Lap-Tech    Bowmanville, ON L1C2J3
Feb 09, 2012 Inherently non-conducting and insulated from adjacent components, Model HC-26/U is sealed by heat, fusing glass envelope to glass base while under vacuum. Resulting hermetically sealed crystal features 4.90 mm lead pitch, frequency range of 4-220 MHz, and operating temperature of -40 to 200°C. Measuring 13.46 x 10.40 x 4.10 mm, impermeable enclosure is suited for RF systems and manufacture of oven controlled crystal oscillators.

Acuity Brands Lighting, Inc.    New York, NY 10001
Feb 09, 2012 Replacing 100-400 W metal halide luminaires, D-Series Size 1 LED Luminaire features modular design to facilitate maintenance and light engine upgrades. Unit is available with dimming capabilities and ROAM® wireless monitoring and control compatibility. Finished in zinc-infused powder coat paint that resists corrosion and weathering, luminaire produces zero uplight, consistent with LEED® and Green Globes® criteria. Applications include parking lots, plazas, campuses, and streetscapes.

The Reynolds & Reynolds Co.    Dayton, OH 45430
Feb 09, 2012 Intended for automotive retailers, ERA-IGNITE features advanced GUI to help dealerships optimize productivity and profitability. Windows-based program includes Retail Management Intelligence, which puts critical business information at decision-makers' fingertips. As complement to standard application reports and user-defined reports available in Retail Management Intelligence, Dashboard Reporting feature offers up-to-the-minute snapshots of dealership departments and critical business processes.

3M Co.    Springfield, MO 65802
Feb 09, 2012 With adhesive technology that delivers reliable surface adhesion and thermal stability, 3M(TM) Protective Laser Tape provides temporary protection for various finishes of stainless steel, carbon steel, and aluminum sheets during laser cutting and storage. White polyolefin film is coated with high-performance adhesive, and this combination helps prevent ballooning, edge shredding, and other problems. Tape produces no volatile organic compounds during manufacturing process.

Endress + Hauser Inc.    Greenwood, IN 46143
Feb 09, 2012 Through Installed Base Audit Program, experts will survey plant, document all installed instruments and analyzers, recommend maintenance and calibration procedures, and provide plant with complete instrumentation support package. Plant gets organized W@M database with collected data, optimizing traceability and continued management of installed devices. Service simplifies measurement device maintenance, helps plant conform to various regulations and safety requirements, and helps minimize TCO.

Maxim Integrated Products    Sunnyvale, CA 94086
Feb 08, 2012 Available in 16-pin QSOP, Models MAX16919/MAX16969 feature iPod®/iPhone® fast-charge detection, which supports Hi-Speed USB at 480 Mbps and full-speed USB at 12 Mbps, enabling users to recharge USB devices while driving. Units also provide integrated host-charger detection circuitry and adjustable current capability of 3 A. With short-to-battery and short-to-ground protections, ICs are suited for automotive radio, navigation, connectivity, and USB hub applications.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 08, 2012 Combining resistance values from 100-750 µW with 3 W power capability in 3124 size package, Power Metal Strip® WSMS3124 is designed for industrial and consumer single- or multiphase energy meters. It features 5-terminal connection design, all-welded construction, and offers very low inductance values of less than 0.5 nH and low thermal EMF of less than 3 µV/°C. Device is lead-free and RoHS-compliant. Physical shape results in very low TC down to 75 ppm/°C.

Banner Engineering Corp.    Minneapolis, MN 55441
Feb 08, 2012 Rotating and strobing models of EZ-LIGHT® K50 Beacon are viewable from all directions and designed for areas with high ambient light, including outdoor environments. While both models offer solid ON function, rotating models offer 2 rotating speeds. Similarly, strobe models offer single/double strobe function in addition to also emitting light from top. Other features include 12-30 Vdc operation as well as cabled or quick disconnect options.

AZCO Corp.    Fairfield, NJ 07004
Feb 08, 2012 Driven by servo motor, Modular Punch Station uses through hardened punch and die tooling for precision cuts. Roll of base material is placed on motorized unwind, and as dancer moves, unwind feeds out material to set of idler rollers. Servo driven nip rollers pull material through punch station, and motorized rewind winds material onto cardboard core. Operating from 110 Vac, station is mounted onto base plate and all functions are controlled via color touchscreen.