Consona Corporation    Indianapolis, IN 46240
Sep 17, 2009 Designed to improve operational efficiencies for manufacturers, Relevant v5.2 helps them meet specialized Earned Value Management (EVM) requirements of U.S. DoD contractors. Quality module ensures product condition and caliber by identifying item's defect and cause, suggesting corrective action to take, and offering quality workbench to guide inspectors through inspection process. Software also includes service and repair, MRP planning, and WBS budgeting capabilities.

FISERV, Inc.    Brookfield, WI 53045
Sep 17, 2009 PEP+ is online system that enables origination and receipt of electronic payments through Automated Clearing House (ACH). PEP+ NOC Manager updates, monitors, and manages Notifications of Change (NOC) alerts to fulfill NACHA processing requirements. Software verifies that changes have been made prior to resubmission into ACH payment network. Designed to enable banks to store NOC information on behalf of corporate originators, module collects all NOC information for any originator.

GAO FiberOptics Inc.    Toronto   Canada
Sep 17, 2009 Designed to convert 1000Base-T signals to 1000Base-X fiber signals and vice versa, SFP (Mini-GBIC) Ethernet media converter extends connection distance between 2 Gigabit Ethernet devices via fiber cable without performance degradation. It conforms to IEEE802.3z standard and supports both full- and half-duplex modes with data transmission rates of 2,000 and 1,000 Mbps, respectively. Backward compatible with 10M, 100M, and 10/100M equipment, unit supports multi- and single-mode fibers.

AVX Corp.    Myrtle Beach, SC 29578
Sep 17, 2009 Offering 5.6 V rating in 0201 case size, miniature Transguard® Series multi-layer varistors are suited for use in handheld devices, including cell phones and PDAs, as well as embedded components such as hearing aids and camera modules. Featuring sub-1 nsec response time to ESD strike, products have multiple strike capability up to 1,000 strikes at 8 kV of contact. Devices have leakage current of less than 5 µA at rated voltage.

Ecliptek Corporation    Costa Mesa, CA 92626
Sep 17, 2009 Model EMCL12 and EMCL13, and EMDS12 and EMDS13 are LVDS and LVPECL 6 pad surface mount low profile 5.0 x 7.0 mm MEMS oscillators, providing low jitter differential clocking solutions for PCI-Express, Fiber Channel, Gigabit Ethernet, SATA/SAS and networking applications. Model EMCL12 and EMCL13 (2.5 Vdc and 3.3 Vdc LVPECL output) and EMDS12 and EMDS13 (2.5 Vdc and 3.3 Vdc LVDS output) include frequency stability at ±20 ppm and operating temperature range between -45°C and +85°C.

Pentek Inc.    Upper Saddle River, NJ 07458
Sep 16, 2009 Able to accommodate deployed and lab environments, Model 7158 dual-channel, 12-bit, 500 MHz data converter is based on dual Virtex-5 reconfigurable FPGA architecture that promotes processing power as well as FPGA resource flexibility. There is 512 MB DDR2 SDRAM arranged in 2 banks, which enables real-time data capture, and total SDRAM capacity can be doubled to 1 GB. Example high-speed, wideband applications include remote radar countermeasures, tracking, and UAV surveillance.

Handheld Europe AB    Lidköping   Sweden
Sep 16, 2009 Leveraging 806 MHz processor and Windows® Mobile, IP67-rated Nautiz X7 incorporates transmissive micro reflective screen with full VGA and touch display. Other standard features include 128 MB RAM, 4 GB built-in Flash storage, USB host, and SDIO expansion slot. While 5400 mAh Li-ion battery provides more than all-day performance, features such as 3G cellular phone capabilities, WLAN, Bluetooth, GPS, digital compass, altimeter, 9-pin RS232, and G-sensor ensure operational flexibility.

Toshiba America Information Systems, Inc    Irvine, CA 92618-1697
Sep 16, 2009 Measuring 5 mm high with 160 GB capacity, 1.8 in. MKxx34GAL Series is equipped with PATA interface, 4,200 rpm rotational speed, and acoustic-reduction features. Units can store up to 45,000 digital photos, 42,000 digital music files, or 130 downloaded digital videos. Able to tolerate up to 1,500 G of non-operational shock and 600 G of operational shock, drives are suited for portable media players, digital video cameras, and other consumer electronics products.

Indium Corporation    Utica, NY 13502
Sep 16, 2009 Heat-Spring® metallic thermal interface material is soft metal alloy developed as compressible metallic shim suitable for IGBT mounting applications. Material's Heat-Springs are compressible soft metal performs that adapt to irregularities in mounting surface and are conductive both thermally and electrically. No special mounting apparatus is required. Heat-Springs are made of 100% recyclable and reclaimable metal and are considered green interface material.

Navico Inc.    Nashua, NH 03063
Sep 16, 2009 Available in 12.1 and 8 in. screen sizes, NSE series networkable GPS Chartplotter offers out-of-the-box functionality with Nautic Insight HD Hi-Res vector cartography. Interface combines elements of Northstar's direct access functionality with menu-driven UI, and data entry is facilitated by rotary dial with logical push-to-enter selection, direct access keys, and alphanumeric keypad. Rated at 1,500 nits, Simrad SunView(TM) screens support full sunlight viewing and have 120° viewing angle.

Acromag, Inc.    Wixom, MI 48393 7037
Sep 16, 2009 Able to simplify data acquisition from mix of analog isolation amplifiers, 958EN BusWorks module offers Ethernet interface and has 16 analog voltage inputs to accept ±5 and ±10 V signals from 8B or legacy 7B signal conditioning modules through DB25 port. Fast scanning updates all 16 channels in 8 msec, and dual-format data registers support 16-bit integer and 32-bit floating point formats. Other features include integration/totalization capability and averaging function.

Argonics, Inc.    Gwinn, MI 49841
Sep 16, 2009 Argonics Load Zone Impact Bed is engineered for CEMA B, C, and D idler classes. Custom-built to conveyor belt's width and trough angle, impact and slider bed is manufactured with collapsible trough wings and has hinge system with 2 x ½ in. support brackets for each support leg, simplifying installation/bar change-out. Kryptane® urethane impact bars feature energy-dispersion cavity to absorb impact for belt protection and aluminum insert that accepts ½ in. bolt.

Capital Safety    Red Wing, MN 55066-5005
Sep 16, 2009 Saflok® Toggle Anchor can serve as tie-off point for fall arrest, fall restraint, or work positioning equipment or for personnel riding systems in horizontal/vertical/overhead applications. Once inserted through pre-drilled 0.75 in. mounting hole, SS toggle bar rotates perpendicular to hole, securing 5,000 lb breaking strength at anchor point. Used with concrete, precast concrete, and steel flange applications, anchor supports weight up to 310 lb.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Sep 16, 2009 Mounted in wall or podium, Media Presentation Controller(TM) model MPC-050 features built-in 2-Series control system and fits onto standard 3-gang electrical box. LCD has 4 soft and 7 hard key buttons with LED feedback, programmable for controlling system functions. In addition to several connectivity interfaces, there are also 16 programmable buttons, customizable backlit labeling, volume control knob, 17 control ports, and wireless remote capability.

Micro Crystal, U.S.    Arlington Heights, IL 60004
Sep 16, 2009 Supplied in 3.2 x 1.5 x 0.90 mm ceramic package, CC7A-T1A precision timing crystal operates over -40 to +85/+125°C range and offers thermal stability down to +/-10 ppm. AT cut quartz crystal is RoHS-compliant and exhibits resistance to shock and vibration. Standard output frequencies are 24.0, 26.0, and 26.5 MHz, with other frequencies in 24-30 MHz range upon request. Markets served include implantable medical and medical telemetry, avionics, and automotive applications.

Adhesives Research, Inc.    Glen Rock, PA 17327
Sep 16, 2009 Featuring AS-192 acid-free adhesive, 1 mil ARclear® 92400 and 2 mil ARclear® 92469 provide optical bonds across entire glass viewing surface of capacitive touch screen to indium tin oxide-coated substrates. Adhesive demonstrates low extractable anions and low outgassing of VOCs, and does not contribute to corrosion of ITO layers. Both electronically clean transfer tapes include optically clear polyester release liner to facilitate handling and application.

Parker Hannifin Corp.    Oxford, MI 48371
Sep 16, 2009 Designed to facilitate building of compact pneumatic systems, centralized Isys Micro lets users choose from various installation configurations, communications protocols, and override systems. Plug-in valve island features metal sub base onto which up to 4 valves can be fitted, and back-to-back design incorporates 4 solenoid valves in each 42 mm wide slice, producing up to 8 functions per module. Valves also feature Wear Compensating Seal Technology, which can achieve 50 million cycles.

Parker Hannifin Corp.    Oxford, MI 48371
Sep 16, 2009 Suited for use in Lucifer stainless steel solenoid valves as well as brass and aluminum X valves, "d mb" and "ia" ATEX-certified 37 mm Electrical Coils meet T6 temperature classes. Stainless steel fittings and IP67 protection level permit coils to be used where ambient constraints are hard, aggressive, and sometimes corrosive. By using booster technology for "ia" product, current consumption is reduced to 20-15 mA, allowing usage in markets with intrinsically safe electrical circuits.

Parker Hannifin Corp.    Oxford, MI 48371
Sep 16, 2009 Designed for use with gases and liquids, Rectus PPL and PPM Couplings feature nominal diameters of 3 and 6 mm, respectively. Integrated unlocking thumb key allows connection to be made and released safely and quickly with one hand, even with surgical gloves. Shut-off valve provides additional safety in coupling process and includes audible detection. Made of USP class VI polyoxymethylene, couplings feature working pressures up to 8 bar and temperature range of -40 to +82°C.

Aven, Inc.    Ann Arbor, MI 48108
Sep 16, 2009 Equipped with HRC 54 or HRC 56-60 SS blades, industrial-grade 2-in-1 Combination Scissors can cut copper-braided wire, nylon, or Kevlar fiber and insulated cord. Notched gripping surface from tip to middle of blade holds items firmly for fine, clean, flush cuts without slipping. It can cut aluminum or copper sheets up to 0.5 mm thick or plastic plate and PET packaging up to 1.0 mm. Higher up are U-style blade notches that tightly hold copper wire or rubber-coated cord up to 1.5 mm in diameter.