TE Connectivity Ltd.    Berwyn, PA 19312
Jun 02, 2010 Providing 2 points of contact, Industrial Mini I/O Connector includes latching system that protects plug from pull-out during high-vibration or collision. Polarized, wire-to-board interface offers 2 keying options to prevent mismating and consists of 8 individual circuits to accommodate I/O signals. Operating from -40 to +70°C, connector features current rating of 0.5 A and voltage rating of 30 V on 0.635 mm centerline spacing. SMT and through-hole configurations are available.

Siemens Water Technologies    Warrendale, PA 15086
Jun 02, 2010 Designed for water used in healthcare industry, Nosogard Filters combine 1.0 micron pre-filter and 0.2 micron microporous membrane to remove water-borne pathogenic organisms. Point-of-use filters are integrity tested, performance-validated, and shipped in radio-sterilized packaging with peelable lids to maintain sterility. Seven-day and 14-day filters remove all organisms, while 30-day filters remove legionella only, for 30 days. Sixty-day filter is also available.

NSK Americas, Inc.    Ann Arbor, MI 48106-1507
Jun 02, 2010 Packed with EA7 grease, Fretting Resistant Servomotor Bearings are utilized where precise motion control is vitally important. Low-noise units offer rust prevention, optimized oxidation and heat stability, NLGI consistency 3, and corrosion protection in humid conditions. By minimizing fretting damage caused by microvibrations, bearings offers extended service life.

AutomationDirect.com    Cumming, GA 30040-9905
Jun 02, 2010 Supplied in aluminum housing that supports 3 orientations, panel-mount RHINO(TM) PSS series is available with universal single-phase input and output voltages of 12 and 24 Vdc from 35-100 W. DIN rail-mount RHINO PSB series, offered in plastic and aluminum housings, are available with universal single and 3-phase input and output voltages of 12-24 Vdc from 15-480 W. Both UL-recognized, CE-marked, and RoHS-compliant series integrate overload, overvoltage, and thermal protection.

HaydonKerk Motion Solutions    Waterbury, CT 06705
Jun 02, 2010 Manufactured of 303 stainless steel, Kerk® Micro Series Lead Screw Assemblies enable miniaturization of products while also reducing power consumption and weight without sacrificing performance or reliability. Standard configurations include 2 mm dia screws with leads from 0.3-2 mm per revolution and various nut configurations of self-lubricating acetal and Kerkite® High Performance Composite Polymers. Thread uniformity lends to precise motion as well as minimal noise and vibration.

Kinetic Systems, Inc.    Boston, MA 02131
Jun 02, 2010 Suitable for production, testing, or research in optics field, Mobile Darkbox Enclosures block all ambient light and can be produced to customer-specific requirements. Units feature sliding or fixed panels on all 4 sides, and can be large enough to incorporate optical tables, breadboards, or workstations. Offered with multiple tiers of shelving, boxes are available with heating and air conditioning, electrical connections, laser ports, and/or computer network connections.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jun 02, 2010 Combining aeration and vibration, Model MFD Micro Fluidizer Disk solves difficult bulk solid flow applications. Design creates vibrations as air flows between pads boot and bin wall, providing effective flow aid for all types of dry products. Operating from -40 to 340°F, self-cleaning disk requires air supply of 29-87 psi. Unit includes ¼ in. male BSP connection and ¼ in. ID compression fitting.

Advanced Interconnections Corp.    West Warwick, RI 02893
Jun 02, 2010 Designed for test, debug, and validation of 0.50 mm pitch BGA devices, Mod5 Series Flip-Top(TM) BGA Socket features compact, surface mount design and installs without tooling or mounting holes in target PCB. Precision machined metallic spring probes offer contact life of 200,000 cycles min, and provide high bandwidth with low insertion loss. Measuring 20 x 27 mm, modular socket accommodates BGA packages up to 12 sq mm (22 x 22 rows) and enables simple reflow process.

AVX Corp.    Myrtle Beach, SC 29578
Jun 02, 2010 Including 125 and 150 pF versions, miniature TransGuard® 0201 Series MLVs provide multiple strike capability and are able to withstand 1,000 strikes at 8 kV of contact. They feature sub 1 nsec response time to ESD strike, 5.6 V rating, and have leakage current of less than 5 µA at rated voltage. Offering bi-directional transient voltage suppression with low insertion loss, devices are suited for handheld devices, as well as embedded components such as hearing aids and camera modules.

Excel Scientific Inc    Wrightwood, CA 92397
Jun 02, 2010 Designed for automated microplate sealing, Roll-Seal rolls are constructed on 3 in. plastic cores and are compatible with most common adhesive sealers. With ultra-strong silicone adhesive, ThermalSeal RTS(TM) clear films are suited for qPCR and sitting-drop protein crystallization. AlumaSeal® pierceable aluminum foils suit PCR, HTS, and cold storage applications, while breathable AeraSeal(TM) films are suited for cell and tissue culture.

Agie Charmilles, LLC    Lincolnshire, IL 60069
Jun 02, 2010 Accommodating workpieces up to 77 lb, CUT 1000 OilTech uses wires as small as 0.02 mm dia and surface finishing technology to achieve finishes down to Ra 0.05 µm in continuous operation. Machine uses oil as inert dielectric, eliminating effects of corrosion in workpiece due to long periods of immersion. Programmable via machine control, machine is able to work with 2 wire spools, each with different wire type, and switch between wires of different diameters automatically.

Heyco Products    Toms River, NJ 08753
Jun 02, 2010 Providing watertight seal for PV module output leads to inverters, Masthead(TM) II Cordgrips are constructed of UV resistant nylon with TPE or Buna N Sealing Gland to resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They also meet 94 V-2 flammability and IP68 ratings, and have temperature rating of -22 to 212°F. Provided with assembled metal locknut and NPT threads, cordgrips can be attached directly to rigid (PVC) or EMT-type conduit via adapter.

Viking Corp., The    Hastings, MI 49058 9706
Jun 02, 2010 Able to install into standard 2 x 4 in. stud wall in residential applications, 4.0 (58) K-factor Freedom® VK480 sprinkler comes standard with installation pipe guide, which ensures proper location of sprinkler to allow for ¼ in. adjustment of cover plate. Sprinkler is cULus listed for up to 16 x 18 ft coverage area and has temperature rating of 165°F with 135°F for cover plate. Cover plate has white finish as standard, and can be specified with any custom color.

J. W. Winco, Inc.    New Berlin, WI 53151
Jun 02, 2010 Made of zinc plated, blue passivated steel, series GN 350.1 Short Model leveling sets consist of threaded upper sleeve and tapped lower sleeve, and are used for leveling, adjusting, and linking operations of smaller dimensioned components. Fine thread allows precise, stepless setting and locking using hook wrench. Anti-rotation disk also serves as height limiter for max height.

Elscint Automation    Pune 411026  India
Jun 02, 2010 Available in widths of 150, 200, 300, and 400 mm, Elevator Feeder has hopper capacities ranging from 75-200 L and suits bulk feeding of light metallic parts. Height of elevator is adjustable along with degree of inclination, while integrated level sensor controls feeder and provides start/stop operation. Constructed of extruded aluminum, feeder features modular plastic inclined conveyor belt, geared motor, and can be supplied with optional variable speed controller.

AICSYS, INC (Advanced Industrial Computer Systems)    Taipei Hsien   Taiwan
Jun 02, 2010 Designed to support PICMG backplane and full-size SBC, RCK-202B can accommodate up to two 5.25 or three 3.5 in. internal drives and meets EIA RS-310C 19 in. rackmount standard. I/O expansion can be configured via optional 2 or 4-PCI slots on PICMG backplane, while two 8 cm replaceable high-speed ball bearing fans provide ventilation for heat sensitive applications. Made of heavy duty steel with Ni plating, chassis has lockable front door and PS/2 or hot swap redundant power supply.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Jun 02, 2010 Designed for 8 x 8 mm package size, CG-BGA-5009 socket for 0.4 mm pitch BGA 400 pin ICs connects all pins with 10 GHz bandwidth on all connections, with less than 1 dB of insertion loss. Socket offers pin self inductance of 0.11 nH and mutual inductance of 0.028 nH, 0.028 pF capacitance to ground, and current capacity of 2 A per pin. Featuring integrated heat sinking mechanism, unit has -35 to +100°C temperature range and mounts on target PCB using supplied hardware with no soldering.

BVM Ltd    Southampton Hampsh SO30 0GH  United Kingdom
Jun 02, 2010 Measuring only 100 x 72 mm, LP-170 supports Intel Atom N450, D410, or D510 processors, running at 1.66 GHz with either 2 (N450) or 4 GB of SDRAM. Integrated Intel extreme GMA3150 graphics processor shares up to 384 MB of system memory, supporting external 1400 x 1050 display and HD video up to 720 pixels. Running on 12 Vdc external power supply, board operates in fanless mode. Peripherals include, Gigabit LAN socket, 4 x USB2.0 ports, SATAII interface, and CompactFlash Type II socket.

Spinnaker Coating    Troy, OH 45373
Jun 02, 2010 Exhibiting high tack, SureLock(TM) adheres to textured surfaces without being gummy, and works in variety of hard-to-stick-to applications. Adhesive runs with less build-up on press and has flat release profile for clean dispensing. Available trimless in variety of formulations, adhesive can be used on lumber, carpet front and carpet back, plastic woven bags, ABS plastic, plywood, tile, burlap, and cement.

Spartan Scientific Inc.    Boardman, OH 44512
Jun 02, 2010 Available with orifice sizes of 20-25 mm and port sizes of ¾ and 1.0 in. NPT, pilot diaphragm-operated Series 4700 valves suit high flow applications such as condensation removal, carwashes, autoclaves, and irrigation control. Offered with standard manual override, valves operate in pressure range of 4.5-220 psi and have flow factor of 9.1-14 Cv, depending on port size. Normally open or normally closed, 2 way, 2 position valves have ambient temperature range of -15 to +50°C.