AMETEK Spectro Analytical Instruments Inc.    Mahwah, NJ 07430
Jun 09, 2010 Featuring inductively coupled plasma, SPECTRO MS simultaneously records entire elemental spectrum between lithium and uranium for every analysis. Ion optic transports ions from plasma into spectrometer, while removing neutral particles and photons from beam. Direct charge detector with 4,800 channels is placed in focal plane of spectrometer measuring mass spectrum with average of 20 channels/isotope. By recording contents of different isotopes, instrument opens variety of applications.

Maxim Integrated Products    Sunnyvale, CA 94086
Jun 09, 2010 Used as equalizer, preemphasis driver, or redriver, quad 1-8.5 Gbps Model MAX3987 equalizes up to 30 in. of FR4 or 10 m of 24 AWG cable at I/O. Device features signal-detect and output-squelch capabilities, as well as I²C interface for programming preemphasis, output swing, and output polarity. Housed in 7 x 7 mm TQFN package, IC operates from 3.3 V supply over -40 to +85°C range and is suited for 6.25 Gbps XAUI, 8.5 Gbps Fibre Channel, 6.0 Gbps SAS/SATA, and InfiniBand® DDR applications.

Taylor Hobson, Inc.    West Chicago, IL 60185
Jun 09, 2010 Developed to photovoltaic and semiconductor application requirements, Talysurf CCI SunStar merges non-contact dimensional measurement capability with thin and thick film analysis technology. Coherence correlation interferometer, with one measurement, can obtain information on film thickness (5 µm to 300 nm or less), interface roughness, pinhole defects, and de-lamination. Auto-range and auto-fringe-find functions, 4-million-pixel camera, and closed-loop Z scanning mechanism are standard.

Maxim Integrated Products    Sunnyvale, CA 94086
Jun 09, 2010 Supplied in 5 x 5 mm, 32-pin TQFN package and specified over -40 to +85°C range, MAX15048/MAX15049 offer 3 regulated output voltages and integrated tracking/sequencing to control core and I/O voltages. Synchronous step-down controllers meet tolerances of small-geometry logic devices. They drive external MOSFETs to deliver regulated 0.6-19 V output and up to 15 A of load current per output. Operating operate from 4.7-23 V input, devices support battery packs as well as 40 nm ASICs.

ZMD    Dresden   Germany
Jun 09, 2010 Operating on principle of successive approximation, SARah ZADC510x and ZADC512x Converters are available in 2, 6, and 10-channel versions. Units have differential nonlinearity of ±1 LSB and integral non-linearity of ±1 LSB over temperature range of -25 to +85°C. Available in 10-bit and 12-bit models with internal or external voltage references, ADCs are suited for high-speed applications, such as motion control, 3-phase motor control units, inverters, or multi-axis positioning systems.

ZMD    Dresden   Germany
Jun 09, 2010 Developed for resistive bridge sensors, Model ZSSC3017 combines amplification, 16-bit analog-to-digital conversion, and 18-bit DSP for linearization and calibration functions. Analog front end offers multiple programming options, including on-chip temperature sensor and fully differential signal paths. Using second-order charge-balancing ADC, IC topology delivers less than ±0.5% FSO accuracy error over full temperature range of -40 to +85°C, making it suited for altimeter/barometer systems.

ZMD    Dresden   Germany
Jun 09, 2010 Adjustable to nearly all resistive bridge sensor types, ZSSC3053 Differential Sensor Signal Conditioner provides amplification and sensor-specific correction of mV-level DC sensor signals. CMOS IC measures pressure, temperature, linear position, force, and load, and offers single-pass one-shot calibration. Operating on 2.7-5.5 V over temperature range of -25 to +85°C, device features 15-bit precision and ±0.1% FS accuracy over full temperature range.

Dicon Fiberoptics Inc.    Richmond, CA 94804
Jun 09, 2010 Tunable optical filter module, used with GP750 fiber optic test system, utilizes MEMS technology for precise wavelength tuning and is suitable for test applications in optical channel performance monitoring, ROADM systems, noise suppression, or signal tracking. Available in either 50 or 100 GHz channel spacing and designed for use in either C or L band, between 1 and 4 tunable bandpass optical filters can be integrated into each module.

JWC Environmental    Costa Mesa, CA 92626
Jun 09, 2010 Featuring low-profile tank design, self-contained, hopper-fed Monster® SWM-XE grinds, washes, compacts, and dewaters debris captured by wastewater screen. Smart Controller(TM) has 3 operational stages and system automatically selects optimum stage for proper level of solids washing. Breaking up clumps of debris, Muffin Monster® dual-shafted grinder preconditions solids entering washer compactor, while triple zone spray system eliminates fecal matter and minimizes foul odors.

Parker Hannifin Corp., Pneumatic Div.    Richland, MI 49083 0901
Jun 09, 2010 Manufactured to SAE J514 dimensions for 37° flare fittings and SAE J1453 dimensions for O-ring face seal fittings, SAE Aluminum Tube Fittings are suited for applications where weight reduction and/or corrosion resistance are essential. Connector port ends have no exposed threads between locknut and backup washer, eliminating washer damage and preventing leaks. Temperature ratings are from -40° to 400°F, depending on seal material. SAE dimensions allow for easy hydraulic system conversions.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
Jun 09, 2010 Containing 2 solid state relays, Model 3053 features max DC switching voltage of 40 Vdc, max AC switching voltage of 28 Vac, and max switching speed of 300 Hz at zero load. Opto-isolation between control inputs and outputs of SSR in form of GaAs LED paired with set of optically controlled MOSFETs provides protection from output to input. Relay is suited for controlling large loads and devices such as AC or DC motors, electromagnets, solenoids, and incandescent light bulbs.

American Industrial Systems, Inc.    Irvine, CA 92614
Jun 09, 2010 Based on 1.6 GHz Intel® Atom N270 processor, 10.4 in. Rugged Mobile Data Terminal PC features aluminum-magnesium alloy construction with individually sealed ports for IP54 waterproof and dustproof protection. Unit is engineered to MIL-STD 810F standards and offers ISO 7637 compliance. Powered by Li-Ion battery, terminal has built-in touchscreen with transflective backlight available for sunlight readability, and 802.11b/g WiFi and Bluetooth modules for connection to wireless networks.

Schweitzer Engineering Laboratories Inc.    Pullman, WA 99163
Jun 09, 2010 Able to operate as OC-48 SONET multiplexer and/or GbE switch, SEL ICON (Integrated Communications Optical Network) features precise time distribution accurate to 1 µs over WAN. It also offers real-time latency monitor for each channel and support for SONET, Ethernet, and DS0 interfaces such as C37.94 and EIA 232. Product can be managed from one or several locations and is available in 19 in., shelf-mount package and 8 in. DIN-rail or panel-mount package.

Veeco Instruments Inc. Corporate Headquarters    Woodbury, NY 11797
Jun 09, 2010 ContourGT(TM)-K0 non-contact, 3D optical surface profiler combines streamlined architecture and functionality with measurement and computing hardware and software. Dual-LED illumination, combined with optimal vertical resolution, accommodates difficult applications and environments. In addition to Vision64(TM) Operation and Analysis Software, system features intuitive, modular nterface that offers user-level customization capabilities.

Siemon Co., The    Watertown, CT 06795
Jun 09, 2010 Four-port DIN Rail Mounted Patch Panels provide flexible patching solution for RJ-45 based copper and optical fiber. Featuring angled mounting design for low-profile cable routing, products are 4 in. wide and constructed of lightweight, high strength steel with industrial black powder-coat finish and integrated cable management features. Panels are side stackable, enabling high density expansion, and support wide array of cabling connectivity options.

Pres-On Products, Inc.    Addison, IL 60101
Jun 09, 2010 Consisting of removable acrylic PSA coated on 1.5 mil polyester film, optically clear PBCMF-1.5 adheres to fragile plastics, glass, and polished metals that require temporary surface protection through assembly or shipping. Light-tack, static-cling properties allows film to removed, leaving behind no adhesive residue. Available on standard rolls measuring 1, 6, and 12 in. wide with lengths of 216 ft, product is also suitable as support film for thin film substrates or as carrier film.

DELUMPER ® Div., Franklin Miller Inc.    Livingston, NJ 07039
Jun 09, 2010 Suited for recycling, disposal, or reprocessing operations, TASKMASTER® PRS (Product Recovery System) separates dry or liquid bulk product from packaging. Product is separated and discharged from one port, while containers and packages are transported to second discharge port. Suited for expired or returned products packaged in cardboard, plastic, metal cans, and corrugated cartons, system is offered in carbon- or stainless-steel construction options.

IKey Ltd.    Austin, TX 78754
Jun 09, 2010 Suited for harsh environments, 15 in. Model IK-PDS-1502, 17 in. Model IK-PDS-1703, and 19 in. Model IK-PDS-1902 have IP65-rated front panel and are resistant to dirt, dust, liquids, and corrosives. Units, respectively, feature brightness of 350, 300, and 300 cd/m²; contrast ratio of 700:1, 800:1, and 1,300:1; and resolution of 1,024 x 768, 1,280 x 1,024, and 1,280 x 1,024. Operating from 0-50°C, each LCD offers VESA, panel, and wall mounting as well as wall-embedded installation.

Protex Fasteners Ltd    Redditch Herefordsh B98 8PA  United Kingdom
Jun 09, 2010 With all-riveted mounting baseplates that distribute assembly loads over large bearing area, Protex 43-3292, 43-4292, and 44-4292 suit applications in agricultural, industrial, earth moving, and process equipment sectors. Heavy-duty, over-centre latches, offered in stainless or zinc-plated mild steel, respectively achieve tensile strengths of 2,000 and 2,500 kgf with type 04-4292 catchplates. While 43 series products can be padlocked, 44-4292 has automatically locking side-action catch.

RADIALL Inc    Chandler, AZ 85226
Jun 09, 2010 Designed for optical systems using SFP transceivers and duplex LC-terminated fiber-optic cable, R2CT connection kit provides waterproof, sealed connection for fiber-to-the-antenna, remote radio head equipment, and similar outdoor applications. Field-installable and reusable kit, sealing at transceiver-to-cable interface, ensures robust mechanical and environmental performance. Sealing levels are IP65, with IP67 optionally available. Mated connection has 45 lb retention force rating.