Cooper Crouse-Hinds Molded Products    La Grange, NC 28551
Jun 18, 2010 Featuring plug-in format, Model FS32 prevents surges and transient over-voltages conducted along Trunk, or Spurs of field bus systems from damaging associated electronics. Device uses solid state electronics and gas-filled discharge tube to provide surge protection up to 20 kA. In operation, Model FS32 does not adversely affect performance of fieldbus or connected equipment, and allows signals to pass with little attenuation while diverting surge currents safely to earth.

Tnemec Co., Inc.    Kansas City, MO 64120
Jun 18, 2010 With less than 100 g VOC/L, Series 1070V Fluoronar features gloss finish while Series 1071V Fluoronar consists of semi-gloss formulation. High-solids products resist damaging effects of UV light and achieve consistent film thickness, so they can be applied by brush, roll, or spray. Available in more than 500 colors, coatings are suitable for high-profile architectural projects.

Patterson Avenue Tool Co.    Long Grove, IL 60047
Jun 18, 2010 Able to adjust from 15 in. to 10 ft, T-JAK Multi-Purpose Support Tool raises and holds kitchen cabinets and ceiling drywall in place during installation. System eliminates need for bracing or cleats, allowing installer to place shims behind back of cabinet when walls are not straight or plumb. Unlike devices that lift in notched intervals of 1/8 in. or more, T-JAK can split chalk line with continuous, fine tuned adjustments.

SunRay Scientific    Mount Laurel, NJ 08054
Jun 18, 2010 Featuring polymer rheology that maximizes thermal connection and minimizes light loss, MAXIGLOW(TM) 502 conductive silver epoxies are intended for conventional epi-up packaging of LEDs driven at 20 mA. ZTACH(TM) anisotropic conductive adhesives, intended for flip chip packaging of high-power LEDs driven at 350 mA, enables self assembly process that eliminates need for extra processing steps. Both lead-free products are used for packaging of high brightness LEDs (HBLEDs).

Arkema, Inc.    Philadelphia, PA 19103
Jun 18, 2010 Designed for medical device applications, including devices exposed short term to bodily fluids, Pebax® MED resins have passed USP Class VI biocompatibility testing and are sterilizable by EtO, gamma, and steam. Chemistries are also available in breathable films suited for thick coatings or laminates used in level 3 and 4 medical apparel applications, such as surgical gowns, masks, gloves, drapes, and wound dressings.

Elastocon TPE Technologies, Inc.    Rochester, IL 62563
Jun 18, 2010 Designed for manufacture of synthetic corks for wine and cap liners for bottled beverages, Elastocon OF Series of low COF, high strength TPEs are formulated for easy removal from bottles. They are phthalate and latex free, odorless, and are available in hardness ranges from 60-80 Shore A, in small or large quantities. Opaque natural in appearance, TPEs are offered in any color of choice or in translucent natural for coloring by molder.

GOEPEL electronics LLC    Austin, TX 78759
Jun 17, 2010 Compatible with Advanced Mezzanin Cards (AMC) for ATCA systems, CION Fixture(TM)/AMC interface test fixture comes with preset AMC slot in which card is inserted and connected to TAP (Test Access Port) at same time. Integrated IEEE 1149.1 and IEEE1149.6 test channels allow structural test of all high- and low-speed signal pins. Solution supports compact, mid-size, and full-size modules with AMC B+ interface and is compatible with PICMG AMC.0 R2.0 standard.

Quantum Composers    Bozeman, MT 59718
Jun 17, 2010 Designed for 9520 series Digital Delay/Pulse Generators, 45 V High-Voltage AT45 Output Module provides pulse widths up to 10 sec from 3-45 V in high and low impedance, with 20 mV amplitude resolution. Rise time is less than 2 ns up to full 45 V amplitude threshold. Unit is suited for applications that require precision synchronizing or timing control, such as fast solenoid switching, that need higher voltages for actuation.

Semtech Corp.    Newbury Park, CA 91320
Jun 17, 2010 Supplied in 3.0 x 3.0 x 1.0 mm package, EcoSpeed(TM) SC173 and SC174 are, respectively, 3 and 4 A POL buck regulators with adaptive on-time architecture suited for green applications. Functionality covers managing standby and full current demands, and architecture enables pseudo-fixed frequency operation with ±15% accuracy and predictable EMI. Programmable from 200 kHz to 1 MHz, converters let designers optimize power supply to maximize either conversion efficiency or solution size.

Sioux Corp.    Beresford, SD 57004
Jun 17, 2010 With available waste-oil burner option, Steam-Flo® produces 345 lb of saturated steam per hour and burns 2.9 gal per hr of waste-oil. It meets requirements of CSD-1 of ASME code and is built to Section IV of ASME code. Areas of use include commercial greenhouses, nurseries, precast concrete, ready mix concrete plants, and industrial applications such as closed-loop heating systems, heating steam jackets, and thawing pipes and valves.

Sioux Corp.    Beresford, SD 57004
Jun 17, 2010 Drill Pipe Enviro-Cleaner(TM) cleans drill pipe, cables, and down hole tools as they are removed from well, allowing mud and oil removed from pipe to fall back into well, not onto soil. Trailered system provides 320°F water pressurized at 250 psi to steam collar, which is mounted in-line above blow-out preventer between 2 API flanges. As drill pipe is extracted from well, it passes through collar where it is instantly cleaned. Collars are available in stainless and anodized carbon steel.

J-Works, Inc.    Sylmar, CA 91342
Jun 17, 2010 Model WDT205 module plugs into internal USB port that meets Intel Front Panel I/O Connectivity Design Guide for USB port. If communication does not occur between unit and host computer or application within programmed time frame, it triggers relay to close for set amount of time. Relay event can be used to trigger warning device, turn off critical hardware, or perform system reset. Windows driver and DLL or Class Library API are included in product's software interface.

SOR Inc.    Lenexa, KS 66215 2003
Jun 17, 2010 Field-mountable SOR 107 Differential Pressure Switch accurately reads very low pressures by utilizing diaphragm with large sensing area. Switching element is single pull double throw and features external set point adjustment with visual indication for simplified calibration. Designed for wide variety of industrial process applications, standard models are available in weathertight or explosion proof versions.

Temp-Air    Burnsville, MN 55337
Jun 17, 2010 As part of Thermal Remediation System for eliminating bed bugs, EBB-460V delivers 7,000 W at 2,400 cfm of heated air inside treatment space. With target temperature range of 120-140°F, EBB-460V is digitally programmed not to exceed temperatures above 135°F for controlled application of heat, which will result in complete kill of entire life cycle of bed bug. Equipped with lockable swivel casters, unit allows applicators easy access through narrow doorways and small landings.

AZCO Corp.    Fairfield, NJ 07004
Jun 17, 2010 SMARTKNIFE(TM) is equipped with embedded microprocessor and control package that allows knife to achieve cycle rates exceeding 400 cuts/min. Pneumatically-operated with self-contained air cylinder/manifold/solenoid, compact guillotine cutter operates quietly and is simple to install.

Edmund Optics    Barrington, NJ 08007
Jun 17, 2010 With diffraction-limited designs, TECHSPEC® Plastic Hybrid Aspheric Lenses eliminate chromatic aberrations caused by broadband light sources. Color-corrected, molded, aspheric-diffractive lenses have all-plastic, monolithic design and come in 20 coated and uncoated versions in sizes from 12 mm dia x 9-24 mm FL and 25 mm dia x 20-50 mm FL. Able to be used with tunable laser and broadband or multispectral illumination sources, products suit imaging as well as ophthalmic applications.

Outwater    Bogota, NJ 07603
Jun 17, 2010 Able to accept various cove molding light fixtures without causing scalloped/uneven light dispersion and illumination, ORAC DECOR®, ORAC MYLINE®, and Designer's Edge Millwork® Cornice Moldings for Indirect Lighting can also be used as traditional cornice molding without lighting. Each high-density polyurethane molding - primed and ready for painting, glazing, or faux finishing - exhibits dimensional stability and is unaffected by moisture, insects, UV, and solvents.

Aven, Inc.    Ann Arbor, MI 48108
Jun 17, 2010 Designed to help professionals examine lab specimens and industrial parts, OptiVue detail-enhancing light has 3-diopter (1.75x), crystal-clear lens that provides magnification within 3.5 in. viewing area. Flexible gooseneck allows fingertip height and angle adjustments, while 13 W fluorescent bulb promotes clarity. Suited for shared use or frequent relocation, portable lamp comes with 5 ft power cord, plastic lens cover, and clear diffuser/splash guard to protect bulb.

ARi Industries    Addison, IL 60101
Jun 17, 2010 AerOpak® mineral-insulated (MI) cable is used for temperature measurement and signal-sending applications in harsh, corrosive, and other hazardous environments. Comprised of thermocouple and conductor wires, products are insulated with compacted ceramic powder and drawn and encased in seamless sheath. Standard thermocouple or conductor cables up to 10-wire configurations are available in stainless steel, Hastelloy, and Inconel sheath materials in ODs from 0.020-0.750 in. dia.

All Metric Small Parts (aMsp)    New Hyde Park, NY 11040
Jun 17, 2010 Featuring rotary mechanism that promotes higher torque, MLAT08MTH130B Series measures 80 x 63 mm and offers silent operation. Since damping force to rotational movement is applied by viscous resistance of oil, rotation becomes slow and soft. Lift-off hinges are constructed with aluminum die cast hinge body with silver paint, nickel-plated steel pin, and stainless steel hinge piece with barrel polishing.