Widia Inc.,    Latrobe, PA 15650
Jun 28, 2010 Designed for precision tapping applications in steel and stainless steel, WIDIA-GTD(TM) HSS-E taps feature powder-metal substrate with high levels of cobalt content for optimal heat resistance and extended tool life. Manufactured to ANSI and DIN standards, taps feature precision h6 shanks for use with conventional tap holders with square drive or precision round tool holders. Choices include 15° left-hand helix for tapping through holes or 45° right-hand helix for blind holes.

Linear Technology Corp.    Milpitas, CA 95035
Jun 28, 2010 Available in leadless 4 x 4 mm QFN-20 package, power management IC LTC3109 features auto-polarity architecture to generate usable power from input voltages as low as ±30 mV, enabling temperature differences to ±1°C across TEG to be harvested. Device uses 2 standard compact step-up transformers. Inbuilt 2.2 V, 4 mA LDO's main output is pin selectable to one of four (2.35, 3.3, 4.1, or 5 V) fixed voltages to power sensor, data acquisition circuits, and/or wireless transmitter.

Crystek Corp.    Fort Myers, FL 33913
Jun 28, 2010 Operating at 5,800 MHz with tuning voltage range of 0.5-4.5 Vdc, CVCO55CXT-5800-5800 coaxial VCO features typical phase noise of -100 dBc/Hz at 10 kHz offset and comes in industry-standard 0.5 x 0.5 in. SMD package. Unit exhibits output power of +3 dBm typical into 50 o load with supply of +8.0 Vdc and typical current consumption of 35 mA. Pulling and Pushing are minimized to 1.0 MHz and 3.0 MHz/V, respectively, and second harmonic suppression is -30 dBc typical.

NLB Corporation    Wixom, MI 48393 2824
Jun 28, 2010 Enabling users to clean pipes and tubes with high-pressure water, Rotating Line Moles (RLM) feature operating pressures of 10,000 or 20,000 psi and are available with variety of flows and nozzle patterns. They polish ID of tubes/pipes as they clear them of hard deposits, even around bends, and come with left- or right-hand threads, and wrench flats for attachment to flex lance or rigid lance. Self-lubricating action minimizes wear, while rebuild kit enables field replacement of parts.

NKK Switches    Scottsdale, AZ 85260-3420
Jun 28, 2010 Available in illuminated and non-illuminated versions, RoHS compliant LP01 Series pushbuttons have behind panel depth of only 14.0 mm and cap diameter of 13.6 mm, making overall diameter including housing just 20 mm. Switches come fully assembled and illuminated versions feature option of red, green, or amber LED illumination and translucent white cap. Rated at 3 A at 125 V/250 Vac or at 30 Vdc, pushbuttons also have UL94V-0 flammability ratings and meet UL and CSA standards.

Tridak    Torrington, CT 06790
Jun 28, 2010 With internal design that prevents fluid contact with actuating components, 475 Series diaphragm valves are suited for use with reactive fluids such as cyanoacrylates and solvent-based adhesives and coatings. Standard Model 475 features UHMW polyethylene diaphragm and acetyl copolymer fluid body. Model 475-T features Teflon® diaphragm and fluid body, while Model 475-SA incorporates UHMW polyethylene diaphragm and passivated stainless steel fluid body.

Axiomatic Technologies Corp.    Mississauga, ON L4Z1Z8  Canada
Jun 28, 2010 Suited for off-highway excavators, backhoes, pile drivers, or bulldozers, Bucket Positioning System (BPS) provides continuous assessment of bucket, blade or attachment position as part of complete 2D/3D OEM machine control system. It interfaces with CANopen® devices for angle sensing, and offers fast data exchange with machine control display via Ethernet. Features include operating range of 9-36 Vdc, IP67 rated sealed enclosure, and 2 CAN, 1 Ethernet, and 1 RS-232 serial COM port.

Avago Technologies    San Jose, CA 95131
Jun 28, 2010 Supplied in 6-leaded SOP measuring 5 x 4 x 1.85 mm, ASMT-Jx33 series is available in Cool White (80 CRI), Neutral White, and Warm White (90 CRI). Each 3 W LED, featuring Pb-free construction compliant with RoHS standards, can be driven to up to 700 mA and offers viewing angle of 140° to meet color uniformity demands. Delivering flux output of 70 lm at 350 mA, products have max allowable junction temperature of 135°C and offer 16 kV ESD resistance.

Avago Technologies    San Jose, CA 95131
Jun 28, 2010 Offered in 8-lead, 2.0 x 2.0 x 0.85 mm, SMT QFN packages, RoHS-compliant low noise amplifiers (LNAs) are offered in 1,500-2,300 MHz and 2,300-4,000 MHz versions for base station RF front-end design. At 1,900 MHz and typical operating condition of 5 V/51 mA, GaAs Enhancement-mode pHEMT process technology gives noise figure of 0.48 dB and third order intercept (OIP3) of 35 dBm. At 2,500 MHz and 5 V/56 mA, noise figure is 0.59 dB, and OIP3 is 35 dBm.

Fairchild Semiconductor Corp.    South Portland, ME 04106
Jun 28, 2010 Reducing component count, board space, and BOM for mobile handset designers, FSA2000 consists of USB 2.0 Full Speed (FS) and Hi-Speed (HS) compliant switch that integrates class AB cap-free headphone amplifier. It can also auto-switch to USB when VBUS is present to conserve power and is typically used for USB port isolation, connector sharing, and signal multiplexing in applications such as 3G cell phones, netbooks, and portable MP3/MP4 media players.

Allegheny Technologies Inc.    Pittsburgh, PA 15222
Jun 28, 2010 Able to be cold worked into complex shapes, ATI 425®-MIL Alloy titanium plate and sheet is suited for vehicle armor and structural and suspension components for land-based vehicles. Hot-rolled, annealed plate is available in thicknesses from 0.188-4 in. and has been classified as class 4 armor plate by MIL-DTL-46077G specification. Product is also available in sheet gauges which are continuously cold-rolled and annealed in coil lengths of up to 2,500 ft.

CebaTech, Inc.    Eatontown, NJ 07724
Jun 28, 2010 Delivered as synthesizable Verilog RTL cores or as part of CebaFlex FPGA-based acceleration subsystems, CebaRIP Rapidly Tunable Silicon IP Cores are GZIP and GUNZIP IP cores capable of executing hundreds of thousands of data streams concurrently, without performance degradation. Devices offer context switching that saves state information on data packet boundaries, minimizing network latency. Single core throughput is greater than 4 Gbps and can be aggregated to achieve speeds of 64 Gbps.

Genencor International    Rochester, NY 14618
Jun 28, 2010 SPEZYME® Robust Starch Liquefaction efficiently liquefies dry ground corn and breaks down starch across range of pH levels, reducing amount of sulfuric acid required to complete liquefaction process. Product is effective with one dose and no pH adjustment and can increase yields for ethanol producers.

Riverbed Technology, Inc.    San Francisco, CA 94105
Jun 28, 2010 Riverbed Optimization System (RiOS®) v6.1 offers features that accelerate encrypted traffic for Lotus Notes v8.5 and optimize latency and data reduction for encrypted and unencrypted Exchange 2010 traffic. It also accelerates traffic at network and application layer and provides Layer 7 application acceleration for SharePoint Online, ensuring enhanced performance for organizations leveraging Microsoft cloud-based services.

Analog Devices, Inc.    Norwood, MA 02062-9106
Jun 28, 2010 Providing power measurements of simple and complex waveforms, ADL5505 TruPwr® RF Power Detector is useful for measuring high crest factor signals, such as W-CDMA, CDMA2000, WiMAX, WLAN, and LTE waveforms. RMS output is linear-responding DC voltage with conversion gain of 1.86 V/V RMS at 900 MHz. Requiring single 2.5-3.3 V supply, detector draws less than 1.8 mA and is effective in high-frequency receiver and transmitter signal chains from 450-6,000 MHz.

LabTech Software LLC    Toledo, OH 43604
Jun 28, 2010 With tree-style menus and templates that streamline common functions and processes, LabTech 2010 Remote Monitoring, Management (RMM) and Automation software delivers functionality for scheduling, reporting, inventory management, and service ticketing. It supports detailed searches, exports/saves, and customization as well as access to LabTech server over HTTP connection. Features also include privacy options for end-user PCs and end-user interaction-optimized messaging system.

RSI Content Solutions    Norristown, PA 19403
Jun 28, 2010 Browser-based RSuite v3.5 facilitates creation, management, re-use, and distribution of XML, media files, and other document formats. Using search features, editors and publishers can drill down and locate content based on full-text, metadata, and XML fielded searching. Customers can also configure multiple search forms mapped to publishers' content. With personal clipboard feature, users can organize and work with select content in their own personal whiteboard space.

Tel-Tru Mfg. Co., Inc.    Rochester, NY 14605
Jun 28, 2010 Featuring 316L SS sensing element with silicon glass fused strain gauge, Models P612 and P622 are cCSAus Intrinsically Safe certified to Class I, Div 1, Groups A, B, C, and D. Model P612 can be ordered with pressure ranges to 10,000 psi and comes in accuracy classes of ±0.50, ±0.25, or ±0.15% of calibrated span. Available with pressure ranges to 1,000 psi, Model P622 has same features but is manufactured in accordance with 3A standards for sanitary applications.

SICK, Inc.    Minneapolis, MN 55438
Jun 28, 2010 Featuring plastic housing, suited for standard automation applications, MHTB15 sensor has housing length of 36.8 mm for M12 connector version and 35.8 mm for cable version. Model MHTB15V with stainless steel housing is designed for heavy wash down applications, and features 52.9 mm long housing with M12 connector. Sensors use custom ASIC that incorporates OES3 technology to provide background suppression at extended range of 300 mm, and high immunity to ambient light.

Atlas Copco CMT USA, Inc.    Commerce City, CO 80022
Jun 25, 2010 Model BBC 16 WS, BBD 34 WS, and BBD 94 WE are silenced light rock drills, intended for underground applications, that full comply with ATEX directive. Together with BMK 91RS pusher leg, BBD 94 WS model passes entire process according to directive 94/9/EC, while heavy duty stopers BBC 34 WS6 and BBC 34 WS8 are designed for tough working conditions in drilling, raise driving, and bolting applications and are suitable for medium to hard rock.