Kistler Instrument Corp.    Amherst, NY 14228 2119
Jul 08, 2010 Contact elements Type 1712A... and Type 1714A... facilitates transmission of pressure signals within injection molds by providing electrical connection between cables in different mold components. During mold assembly, these cables are connected via contacts of both elements. Products eliminate need for sensor cables to be guided through several mold plates and support 1- or 4-channel elements, depending on number of cavities.

Fagor Automation Corp.    Elk Grove Village, IL 60007
Jul 08, 2010 Offering host of programmable cycles, Innova 40i True Vision DRO is equipped with TFT color screen capable of solid graphic representations and displaying parts via multiple solid sectional views. Operation-aiding features include, but are not limited to, inch/metric conversion, absolute/incremental programming, axes presetting, and tool offset capability. Other features, including feedrate alarms and feedback signal monitoring, contribute to machine safety and process efficiency.

Actel Corp.    Mountain View, CA 94043 4655
Jul 07, 2010 Mixed-Signal Power Manager Solution features 100 MHz, 32-bit ARM® Cortex(TM)-M3 SmartFusion(TM) FPGA on A2F-DEV-KIT or A2F-EVAL-KIT motherboard. Its graphical configurator enables control of power management thresholds, voltage trimming, and sequencing functionality without changing circuitry programmed into FPGA fabric. Product integrates power rail management into embedded designs and demonstrates power-up sequencing, management, and power down sequencing of up to 32 independent power regulators.

Misumi USA    Schaumburg, IL 60173
Jul 07, 2010 Available in fixed stroke and spacer fitted versions, Cylinders have Twin Guide design that incorporates 2 guide rods for optimal rigidity, resistance to lateral load, and positioning accuracy. Users can specify sliding or linear bushing bearings for guide rod bearings. Constructed of steel components, cylinders come in tube diameters from 12-50 mm and offer piston speeds ranging from 50-500 mm/s.

FANQUIP    Singleton DC   Australia
Jul 07, 2010 Heavy-duty, fixed-head air circulator cooling fan creates air flow in specific areas of factory, plant, office, or laboratory where it would otherwise be difficult to direct fresh air. Operating on voltages of 1-phase 240 V or 3-phase 415 V, unit features motor power ranges from 0.20-0.30 kW and allows free air volumes to be moved at speeds from 3,000-17,000 Lps. Lightweight fan has 2 speeds and includes 3-blade impellers, and can be wall-mounted or operated from steel pedestal.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
Jul 07, 2010 Available with 10-32 side or top connector, Endevco® model 2271A series is used for vibration and acceleration measurements in cryogenic, flight test, HALT/HASS/ESS, and space hardware testing applications. Piezoelectric sensing elements are housed in hermetically sealed, stainless steel case, and signal ground is isolated from sensor's outer case. Exhibiting shock survivability to 10,000 g pk, self-generating device requires no external power source for operation.

Columbia Marking Tools, Inc.    Chesterfield, MI 48047
Jul 07, 2010 I-Mark(TM) I-Series dot-peen marking system includes 7 x 7 x 7 in. marking head, mountable on 1 of 3 sides, that offers X-Y CNC movement provided by high-torque stepper motors and linear rails which mark up to five 1/8 in. high characters/sec. Pneumatic marking pin and carbide tip inscribe different materials including ferrous and non-ferrous metals. Communicating via Ethernet IP, Modbus, Serial, and I/O, system controller can be programmed remotely using included I-Mark Windows® software.

SKF USA, Inc.    Lansdale, PA 19446
Jul 07, 2010 Comprised of 2 series that support integration into new or existing designs, drop-in electromechanical actuators can perform functions traditionally controlled hydraulically or manually. Plug-and-play actuators, intended for off-highway equipment applications, promote precise and reliable movement in applications such as steering wheel and seat adjustment, trailer tilting, and hood lifting. Self-locking, IP66-rated products feature corrosion-resistant housings and metal gears

PREMO Group    Barcelona   Spain
Jul 07, 2010 Model TP0602 allows hearing aid compatibility with mobile phones and has inductance values from 40-170 mH. Ferrite core material provides stable performance over -10 to +40ºC temperatures and unit is wound with copper wires with less than 25 micron dia. Achieving high sensitivity to magnetic field in 1 kHz frequency, SMT unit is useful in telephone communication because it permits volume control of hearing aid to be turned up without creating feedback.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
Jul 07, 2010 Endevco® model 72 series accelerometers feature 20,000 G measurement range, minimum zero shift post-shock event, and Class 3 rating for ESD protection. They have monolithic, four-active arm bridge circuit design that incorporates MEMS sensing element with light gas damping to attenuate resonance. Mechanical stops are also included to increase ruggedness and reduce likelihood of breakage under overload conditions. Low-profile, miniature, hermetically sealed LCC package weighs 0.16 g.

Birchwood Casey    Eden Prairie, MN 55344 2138
Jul 07, 2010 Suitable for most metal surfaces, including iron, steel, copper, brass, and bronze, Presto Black® Gel clings to vertical surfaces and stays where applied without forming runs or drips or bleeding onto adjoining surfaces. Product is applied at room temperature and takes 5-10 min for reaction following normal surface cleaning. Color tone and depth is controlled by visual inspection and stopping process by rinsing off with wet sponge and allowing surface to dry.

EGS ELECTRICAL GROUP ? APPLETON    Rosemont, IL 60018
Jul 07, 2010 With integral gasket, Form-IN-Place(TM) Covers eliminate need to align, assemble, and install traditional removable gaskets. Appleton® units are designed for use with FM7, FM8, and FM9 conduit bodies, and are interchangeable with similar Crouse Hinds® conduit bodies, while O-Z/Gedney® covers are designed for Form 7 conduit bodies. Available to fit hub sizes from ½-4 in., all covers are rated NEMA 3R, UL Listed, and CSA approved for use in wet locations.

James H Heal & Co. Ltd.    Halifax HX3 6EP  United Kingdom
Jul 07, 2010 Martindale 900 Series(TM) includes Midi-Martindale(TM) Model 905 5-station system and Maxi-Martindale Model 909 9-station machine that both offer access to all abrading tables from front, without need to remove top plate. Both machines feature keypad user interface with audible/voice control and allow changes between abrasion, pilling, and straight line motion. Low-power systems enable fabric abrasion, fabric pilling, glove abrasion, sock abrasion, and leather testing.

Kadant Johnson, Inc.    Three Rivers, MI 49093
Jul 07, 2010 ProFlake(TM) doctor blades utilize bi-metal technology that optimizes blade life and flaker performance. Doctor blades are made from non-brittle, wear-resistant alloy that allows blade tip to maintain its doctoring edge throughout useful life and also has low-friction design that is gentle on drum surface. Variety of blade widths, thicknesses, and bevel configurations are available.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Jul 07, 2010 Accommodating 600 lb payloads, MOD 72P bulk laundry cart features internal rib design and all-plastic platform base. It includes ergonomic safety features such as frontal cutaway to reduce bending and reaching; dual, molded-in hand holds; and industrial-strength casters for smooth maneuverability. Rotationally molded from 100% waterproof polyethylene, unit is suitable for transporting clean linens and soiled laundry.

AnaFocus    Sevilla   Spain
Jul 07, 2010 Model LS4k is SoC sensor that combines reconfigurable 4k pixel line with high-responsivity, low-noise photodiodes; high-accuracy, high-speed A/D conversion; and image-processor for real-time optical correction. Flexible control allows reconfiguration of line size via sub-sampling, windowing, and binning reaching up to 70,000 lines/sec for 0.5k-pixel resolution. Unit also has combined ultra-low noise pixel and readout channel that results in maximum-quality images with dynamic range of 65 dB.

Bosch Production Tools    Mount Prospect, IL 60056
Jul 07, 2010 Able to fit in pocket or tool pouch, GLR225 can perform various interior and exterior distance measuring tasks from up to 230 ft and with 0.06 in. accuracy (at 33 ft). Functionality allows measuring from 4 distinct reference points - front or back of laser, 1/16 in. threaded tripod mount, or swing-out extension pin - as well as calculation of measurements in 7 different modes. Results can be shown in inches, feet/inches, decimal feet, and metric.

Samtec, Inc.    New Albany, IN 47151 1147
Jul 07, 2010 Intended for board-to-board and cable-to-board applications, Isorate(TM) IJ5 and IP5 Series achieve mid-range RF-level performance and are available in 50 ohm system on 4 mm pitch. Board-to-board system, available with 1, 2, 4 or 8 pins per row, has 10 mm stack height and provides isolation of 70 dB at 7.6 GHz. Offered in single- and double-row configurations, vertical and right-angle isolated transmission line interconnects feature Edge Rate(TM) contacts and positive latching system.

Vista-CCTV    Wokingham RG41 5TS  United Kingdom
Jul 07, 2010 Available for 4, 8, or 16 camera systems, Quantum EVO DVR offers 160 GB to 1 TB of storage and can be networked to provide off-site use and remote operation, standalone or as part of WAN/LAN. Camera selection, PTZ camera control, and playback of images can be accessed via front panel, wireless IR remote, or by adding Vista VKBD4 remote keyboard. Able to export media to CD, DVD, or USB, system offers main and spot composite monitor outputs as well as VGA for display flexibility.

STMicroelectronics    Lexington, MA 02421
Jul 07, 2010 Model TS331 Micropower analog device offers typical current consumption of 20 µA and can operate from supply voltage as low as 1.6 V. Rail-to-rail inputs enable chip to accept voltages up to supply voltage. Operating in temperatures from -40 to +125°C, unit features open drain output and propagation delay of 200 ns typical, as well as high ESD tolerance of 2 kV HBM/200 V MM. It is available in SMT SC70-5, 2.1 x 2.0 x 1.0 mm, or SOT23-5, 3.1 x 3.2 x 3.45 mm packages.