GE Intelligent Platforms    Charlottesville, VA 22911
Jul 29, 2010 Proficy Accelerator for Weighing Operations digitizes manual process of pre-production ingredient preparation and recording. Key capabilities include weigh order creation and dispatching, automated selection of appropriate weighing equipment based on established certification criteria, and operator guidance during weigh and dispense of materials. Other features include registration of material lot code and verification of correct material usage and historical data recordkeeping.

BakBone Software Inc.    San Diego, CA 92121
Jul 29, 2010 Offering disk-based, real-time data protection solution, NetVault®: FASTRecover(TM) supports Microsoft Exchange, SQL Server, and Windows File Servers. Virtual On-Demand Recovery(TM) technology enables customers to recover Exchange 2010 data in as little as 30 seconds. Program seamlessly protects multiple remote or branch office applications and data across WAN and enables failover to physical or virtual machines.

BIO-key International, Inc.,    Wall, NJ 07719
Jul 29, 2010 Mobile biometric identification and strong authentication platform enables enterprises to capture and transmit fingerprint biometric data to secure server to identify and authenticate mobile smartphone, laptop, tablet, and desktop users. Software is interoperable with numerous fingerprint readers, allowing enterprises to establish identity remotely on variety of devices.

GL Communications Inc.    Gaithersburg, MD 20877
Jul 29, 2010 Deployed as stand-alone appliance or integrated into intelligent third-party network device, PacketProbe(TM) passively monitors VoIP traffic and produces real-time per call and per stream voice quality metrics necessary to isolate and diagnose voice quality problems. Unit is completely transparent to existing network and is able to interface with WAN or LAN. Call metrics can be reported to local console or to centralized database via TCP/IP, SNMP, and RADIUS.

Z Corporation    Burlington, MA 01803
Jul 29, 2010 Offering out-of-the-box functionality, monochrome ZPrinter 150 and multicolor ZPrinter 250 can print multiple, stacked models simultaneously. Both printers support 9.3 x 7.3 x 5 in. max build size and resolutions to 300 x 450 dpi. Minimum feature size is 0.016 in., and vertical build speed is 0.8 iph. Regarding automation, both printers offer automatic setup, powder loading, and self-monitoring of materials and print status.

Micrel Semiconductor Inc.    San Jose, CA 95131
Jul 29, 2010 With 600 kHz switching frequency, Hyper Speed Control(TM) MIC2166 operates over supply range of 4.5-28 V and achieves up to 95% efficiency. Internal VDD regulator enables single-supply operation, while digital soft start minimizes inrush current. UVLO feature ensures proper operation under power-sag conditions, which prevents external power MOSFET from overheating. Available in 10-pin ePad MSOP with junction operating range from -40 to +125°C, IC is suited for set-top boxes, gateways, and routers.

Micrel Semiconductor Inc.    San Jose, CA 95131
Jul 29, 2010 Model MIC2155 and MIC2156 single output, synchronous buck control ICs implement 500 kHz and 300 kHz voltage mode PWM control, respectively, with outputs switching 180° out-of-phase that results in 1 MHz or 600 kHz input ripple, with ripple current cancellation. Two independent enable pins and power good output are included. Operating over temperatures from -40 to +125°C, ICs have 4.5-14.5 V input voltage range and adjustable output voltages down to 0.7 V.

Micrel Semiconductor Inc.    San Jose, CA 95131
Jul 29, 2010 Operating over input supply range of 3-28 V, Hyper Speed Control(TM) MIC2164/-2/-3/C supply 25 A output current and offer switching frequency of 300 kHz, 600 kHz, and 1 MHz, respectively. UVLO feature ensures proper operation under power-sag conditions to prevent external power MOSFET from overheating, while 6 ms internal soft start minimizes inrush current. Housed in 10-pin MSOP, controllers operate from -40 to +125°C with 95% efficiency.

Semtech Corp.    Newbury Park, CA 91320
Jul 29, 2010 RailClamp® TVS diodes protect sensitive components connected to high-speed data and transmission lines from overvoltage caused by ESD, CDE (cable discharge events), and EFT (electrical fast transients). Able to protect up to 2 I/O lines, products feature less than 1 pF capacitance, no insertion loss to over 3.0 GHz, and profile of less than 1 mm. Transient protection is rated to IEC 61000-4-2 (ESD) ±18 kV (air) and ±12 kV (contact) as well as IEC 61000-4-4 (EFT) 40 A (5/50 ns).

Semtech Corp.    Newbury Park, CA 91320
Jul 29, 2010 Supplied in 5 x 5 mm package, SC403 utilizes EcoSpeed(TM) architecture with pseudo-fixed frequency adaptive on-time control and features integrated power MOSFETs, bootstrap switch, and programmable LDO (200 mA). It operates from 3-28 V and offers internal or external bias voltage of 3-5 V. Along with various logic I/O control options, IC incorporates protections for over-voltage and under-voltage conditions as well as TC compensated RDS(ON) sensed current limit.

Silicon Laboratories    Austin, TX 78727
Jul 29, 2010 Requiring one external bypass capacitor, PCB, battery, and external case with pushbuttons, Si4010 RF transmitter SoC reduces complexity of one-way wireless links. It is based on crystal-less architecture, respectively achieving ±150 ppm and ±250 ppm carrier frequency accuracy over commercial and industrial temperature ranges. Other features include automatic antenna tuning, minimized power consumption rates, and embedded 8051-compatible MCU core with several on-chip digital peripherals.

Silicon Laboratories    Austin, TX 78727
Jul 29, 2010 Designed to remove unwanted noise on any clock frequency from 1-710 MHz, pin-controlled Si5317 produces 2 ultra-low jitter output clocks at same frequency as input. Unit delivers jitter performance of 0.29 ps rms, optimizing BER and SNR in jitter-sensitive applications. Integrating single supply voltage regulator, IC eliminates need for multiple supply rails and discrete ferrite beads. On-chip DSPLL technology eliminates need for charge pump and/or loop filter.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
Jul 29, 2010 Suited for installation in remote or skid mount applications, CSI 6500 allows predictive condition monitoring for rotating equipment. Unit measures 7.5 x 10.5 in. and is available in 12- or 24-channel count configurations. State-based triggered acquisition is utilized, so monitoring is tailored to process conditions or machine states rather than collecting generic vibration data. Trends and machinery health information are delivered to AMS Suite for analysis and documentation.

Matrikon    Edmonton, AB T5J3N4
Jul 29, 2010 With OPC Server for GE Mark VI Turbine Controllers Direct, engineers can integrate controllers with other automation components in enterprise such as HMIs, Historians, and ERP systems. Direct Ethernet connection eliminates need for GE TCI/GSM software for communications. Server imports controllers' information and configures automatic OPC server tag list using TCI PC configuration files, and supports process, diagnostic alarms, and events via OPC A&E.

Advanced Polymer, Inc.    Carlstadt, NJ 07072
Jul 29, 2010 AdvaPel(TM) 727 solvent-based fluorochemical resin imparts water repellency and oil resistance across broad range of substrates, such as leather and textiles for apparel, carpeting, and upholstery, as well as hard surfaces such as natural stone. Product is non-C8 based and considered to be non-PFOA contributing.

Pflow Industries Inc.    Milwaukee, WI 53209
Jul 29, 2010 Constructed to hold 3, 4, or 5 levels of vehicles, VDS helps automotive, motorcycle, marine, and recreational vehicle dealers quickly rotate display inventories at any time while conserving time and manpower. Each level has its own platform, and vehicles can be loaded/unloaded in drive-on, drive-off, one-man operation. Able to be installed anywhere on dealership property, system is custom-designed and has built-in safety features.

Acugauge Backflow Test Kits    Margate, FL 33063
Jul 29, 2010 Featuring stainless steel wetted parts, 2 instrument-grade ball valves, ergonomic needle valve, and 3 flexible test hoses, Model 521G is optimized for testing variety of backflow preventer assemblies, including reduced pressure zone, double check valve, pressure vacuum breaker, atmospheric vacuum breaker, and spill-resistant pressure vacuum breaker. Included pressure gauge has 2 in. diameter dial face and can read pressures from 0-160 psi.

GEISS AG    Seßlach D-96145  Germany
Jul 29, 2010 Manufactured to any size and level of automation, FZ Aluminum Milling Machine employs heavy-duty SPL milling head with integrated clutches to clamp axis positions for aluminum and rapid prototyping. Gearless and absolutely rigid torque motor drives C axis; compact, zero backlash Harmonic Drive drives B axis; and linear motor drives for X and Y axes minimize cycle times due to dynamic movements between cuts. There are no limits on travel distance, so any machine size can be configured.

Trans Tech America, Inc., An ITW Decorating Co.    Carol Stream, IL 60188
Jul 29, 2010 Based on electromechanical servo driven platform, Syncro(TM) is designed with ExpressPad(TM) system and ActiveDoctoring(TM) ink cup hold down system. Servo technology enables users to variably adjust stroke of pad such that products can be printed underneath machine base. Print parameters can be recalled for repeat jobs, minimizing setup times. Designed to use SpaceFrame(TM) and ExpressLiner(TM) ink cup systems, printer is available with optional self-contained tape-off device.

Phoenix Plastics L.P.    Conroe, TX 77301
Jul 29, 2010 Manufactured using additives that are FDA approved, Gaia(TM) AB 505 has been tested sccording to the AATCC Test Method 147-2004 standards and has successfully stopped growth of E-coli and staphylococcus. Properties allow material to be manufactured at high temperatures with decomposition range between 450-460°F. Gaia(TM) AB 505 is available in PE, PP, PS and PET carrier.