X-Rite, Inc.    Grandville, MI 49418 2567
Aug 07, 2009 Able to measure any sample accurately from distance of 1.5 in., Model VS450(TM) is suited for measuring cosmetics, wet paint, soil samples, and other wet or powdered substrates. Line of Sight(TM) visibility enables technicians to position sample, while Active Visual Targeting(TM) projects illuminated target ring onto sample for precise measurements. Two aperture sizes of 6 and 12 mm can be switched with click of button, without need to recalibrate instrument.

Saint-Gobain Performance Plastics, Medical Tubing & Assemblies    Taunton, MA 02780
Aug 07, 2009 Available in 50 and 65 durometers and 91 ID/OD combinations, platinum-cured Sani-Tech® Ultra Tubing is manufactured and packaged in certified clean room. Tubing imparts no taste or odors to materials that pass through, and has ultra-low TOCs, virtually eliminating potential for contamination by extractables. Fully autoclavable and sterilizable, tubing accommodates temperatures from -80 to 500°F. It is non-yellowing and offers laser etching for lot traceability.

Krylon Products Group    Cleveland, OH 44115
Aug 07, 2009 Sprayon® Industrial Force(TM) features penetration and emulsification system that ensures removal of dirt, grease, oil, and heavy automotive soils. Coloring agents identify areas covered with product, minimizing product waste and maximizing cleaning efficiency - completely soluble formula changes from orange to green when wet. Easy-rinse cleaner is suitable for use in warehouses, manufacturing facilities, loading docks, garages, service stations, and truck terminals.

L-Com, Inc.    North Andover, MA 01845
Aug 06, 2009 Suited for space-constrained applications, TDG1026KC-R5E offers true 90° connectivity. This unique coupler, designed to address tight-fit applications commonly seen with wall plates and some panel designs, fits standard .765 x .585 in. keystone openings and can be used for voice, video, and data applications. Design is compliant with Category 5E standards.

GE Digital Energy    Markham L6E 1B3  Canada
Aug 06, 2009 Constructed of epoxy and polyurethane resins, ITI Indoor Medium Voltage Instrument Transformers are available in 7.2, 12, 17.5, 24, and 36 kV classes. Units have been designed, manufactured, and tested in accordance with IEC standards. Available in custom designs, transformers are suited for operating meters, instruments, relays, and control devices.

Heidenhain Corp.    Schaumburg, IL 60173-5337
Aug 06, 2009 Suitable for HEIDENHAIN and third party controls, Model TS 642 features mechanical activation microswitch in taper shank, which allows activation once probe is inserted in spindle. Once removed, probe automatically shuts off, optimizing battery life. Integrated blower jets enable cleaning of measuring point with coolant or compressed air. With transmission range of 7 m, probe can be operated for 800 hr of continuous duty with set of Li-Ion batteries.

L-Com, Inc.    North Andover, MA 01845
Aug 06, 2009 Designed for field termination, USBAFT USB Type A Connector provides separate connection points for all 4 positions plus ground. Unit features terminal block design with set screws for electrical connection, and is panel mountable using 4-40 screws provided. Installed into panels, wall plate openings, and enclosures, UADKEY-AB shielded USB keystone coupler features USB A female connector on front and USB B female connector on back. Stamped metal shell and 1-piece design protect against EMI/RFI.

Nextreme Thermal Solutions    Durham, NC 27003
Aug 06, 2009 Used for desktop demonstrations of thermoelectric cooling technology, self-contained eTEC Thermoelectric Cooling Evaluation Kit provides full thermal path and only requires adjustable power supply, voltmeter, and 2-channel type K thermocouple readout to measure temperature differential between hot/cold sides of eTEC(TM). Module can pump heat density up to 72 W/cm² at 25°C and move 3.7 W max heat with active footprint of 5.1 mm². Platform can be embedded directly into electronic packages.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 06, 2009 MPLAB Starter Kit for PIC24H MCUs (part No. DM240021) includes everything needed to develop and evaluate HMIs and intelligent sensor processing for embedded designs. It is based on 16-bit MCU (PIC24HJ128GP504) and also includes OLED array display supported by Microchip Graphics Library, audio and speech playback capability, and user-input capabilities. Additional components include tri-axial analog accelerometer interfaced to PIC24H and application examples.

Ramtron International Corp.    Colorado Springs, CO 80921
Aug 06, 2009 Supplied in RoHS-compliant, 28-pin SOIC package, FM28V020 features NoDelay(TM) writes and unlimited read/write cycles. It operates from 2.0-3.6 V, accesses page mode operation up to 40 MHz, and may be used as drop-in replacement for battery-backed SRAM. Able to operate over -40 to +85°C range, this 256 Kb (32K x 8) nonvolatile ferroelectric random access memory (FRAM) retains data after power is removed and offers extended data retention of over 10+ years.

TR Electronic, Inc.    Troy, MI 48099
Aug 06, 2009 Ethernet/IP LE-200 Laser Distance System incorporates phase-shift differential technology for optimized accuracy and reliability. It is also available with Profibus and CAN interfaces in addition to various operating distances as well as cooling and heating options. Applications include loop control, coil diameter measurement, automated warehousing, level and material control in silos, crane positioning, and general material handling of parts or containers.

Heidenhain Corp.    Schaumburg, IL 60173-5337
Aug 06, 2009 Featuring 58 mm dia, RIC/RIQ 400 series encoders are offered in version without incremental signals, EnDat21, with EnDat 2.1 interface featuring ±480 in. accuracy. It includes single-turn resolution of 13 or 18 bits and multiturn resolution of 12 bits. Version EnDat01 provides incremental signals in addition to absolute position values transmitted with clock frequencies up to 2 MHz. Minimum data transmission time is approximately 25 µs.

Akros Silicon Inc    Folsom, CA 95630
Aug 06, 2009 Model AS1454 quad-output digital power SoC integrates capabilities of up to 8 separate ICs. It includes 9-72 V input range isolated primary converter, 2 kV isolation barrier, high-current-capable buck or boost PWM controller, and 2 x 2 A buck regulators. Built-in cross-isolation DC-DC timing management and digital power control deliver 92% DC-DC efficiency. Unit offers selectable spread-spectrum clocking on all PWMs to minimize spectral noise/EMI of power supplies.

Chem Polymer Corp.    Fort Myers, FL 33911
Aug 06, 2009 Providing alternative to halogenated flame retardant formulations while meeting requirements for flame retardance, Chemlon® 225 GVNH consists of 25% glass fiber-reinforced polyamide 6 with UL 94 flammability listing of V0 at thicknesses down to 0.8 mm. Comparative tracking index of 600 V provides electrical performance required for device housings, circuit breakers, charge covers, and safety switches. Compound is also less dense, yielding lighter parts.

JAI, Inc.    San Jose, CA 95134
Aug 06, 2009 Suited for defense and military security as well as industrial applications, monochrome Models TM-770, TM-773NIR, and TM-775NIR feature 2/3, ½, and 1/3 in. sensors, respectively. Units have SNR of less than 55 dB, standard 768 x 494 TV resolution, and EMI emissions at 12 dB below max limit for Class A products. All camera features can be controlled via RS-232 commands over single interface cable. Measuring 32 x 42 x 48 mm, units support C-mount lenses with adjustable back focus.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Aug 06, 2009 Designed specifically for welding applications, FILTAIR MWX-D features 875 cfm airflow at hood and captures up to 95% of small welding fume particulates. MERV 15 rating means filter is 90% effective at filtering 0.3-1 micron sized particles found in welding fume. Extraction arm, available in 7, 10, and 12 ft lengths, is supported externally, so air flows through unobstructed. Additional features include filter pressure gauge and metal base with large rear wheels for mobility.

Delcam USA    Salt Lake City, UT 84111
Aug 06, 2009 FeatureCAM offers programming option of combined drilling and milling to provide hole creation efficiency on machines fitted with automatic tool changing. In addition to roughing and finishing toolpath generation capabilities, features include support for multi-threading when generating 3D toolpaths. Algorithms in UI accelerate editing of features and reduce time needed to switch between machine-tool set-ups, while post-processor support includes 5-axis and mill-turn equipment.

Delkin Devices, Inc.    Poway, CA 92064
Aug 06, 2009 Fat Gecko Mini attaches on almost any surface and features universal ¼ x 20 in. tripod mounting screw to accommodate any standard camera or camcorder weighing up to 4 lb. Removable single suction cup mount features adjustable knuckle and 3 in. extender allowing for 360° tilt, turn, and rotation. Featuring ruggedized lightweight construction, mount is resistant to salt/fresh water, snow, dirt, sand, and mud.

GF Piping Systems    Tustin, CA 92780-7258
Aug 06, 2009 Offered with complete range of pipe, fittings, and valves, PE100 Industrial Polyethylene Piping System exhibits resistance to chemicals as well as impact and works in temperatures down to -58°F. It is available in pipe sizes from 2-36 in. with molded fittings from 2-12 in. and fabricated fittings from 14-36 in. Installation is performed via one of 3 GF Piping System fusion joining technologies, depending on pipe diameter: IR Butt Fusion, Contact Butt Fusion, or Electrofusion.

Graphite Metallizing Corporation    Yonkers, NY 10703
Aug 06, 2009 GRAPHALLOY® Stainless Steel Pillow Blocks are available fitted with self-lubricating GRAPHALLOY bushings, which resist attack from water and water-soluble chemicals, do not require lubrication, and are corrosion-resistant. GRAPHALLOY graphite-metal alloy exhibits chemical, mechanical, and tribological properties that provide constant, low coefficient of friction. In addition to being self-lubricating, material withstands temperatures to 1,000°F and can survive dry running pumps.