American National Standards Institute (ANSI)    New York, NY 10036
Aug 07, 2009 ANSI announced webstore.ansi.org, used for purchasing and downloading U.S. and other national, regional, or international standards, which offers complete collection of standards from SAE International. Comprised of 9,000+ documents, SAE International body of standards addresses various topics critical to aerospace, automotive, and commercial vehicle industries. Other site features include auto-complete for document number searches, RSS feeds, and email-a-friend function.

Linear Technology Corp.    Milpitas, CA 95035
Aug 07, 2009 Housed in 2 x 3 mm DFN package, 1.5 MHz LT3663 monolithic current mode step-down regulator features input voltage of 7.5-36 V, making it suited for unregulated 12 V wall adapters, 24 V industrial supplies, FireWire, and automotive applications. Output voltages as low as 0.8 V are set by resistor divider, whereas output current is user-programmable between 0.4-1.2 A via external resistor. Onboard input overvoltage lockout protects device through input transients as high as 60 V.

Clearfield, Inc.    Plymouth, MN 55442
Aug 07, 2009 Intended for 1,550 nm optical transmission networks, WaveSmart PowerNode 1550 EDFA offers custom wavelengths and user-defined power output levels for distribution of optical signals. Internal microprocessor provides real-time monitoring and control for operating status of pump and I/O optical power. Warning information will be generated in case of amplifier failure and in critical condition, pump laser will be automatically switched off when no optical power is available.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Delivering 525 W at 1,064 nm, Mamba(TM) Diode-Pumped Solid State Laser features PermAlign construction for drift-free alignment of resonator optics, pump diodes fabricated from AAA(TM) material, 600 or 800 µm square cross section fiber, and indium-free hard solder pump diode packaging. Pulse OnDemand suite of features, including single shot and burst mode operation, and first pulse equalization, make it possible to utilize every pulse produced by laser.

Carmanah Technologies, Inc.    Victoria, BC V9A3S2  Canada
Aug 07, 2009 Featuring up to 10 candela intensity (steady-on) rating, self-contained A650 is available with blue, red, yellow, green, or white light outputs and includes 250+ flash patterns. On-board interface provides access to configurable settings, while built-in system status capability indicates overall battery health and geographical location. Also included, intelligent-deployment feature automatically adjusts optical intensity to suit solar characteristics of its exact geographic location.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Measuring 125 x 70 x 34 mm, Sapphire(TM) 488 LP offers 150 mW of CW output at 488 nm, while Sapphire 561 LP provides 200 mW of power at 561 nm. Units provide stable beam with M² of less than 1.1 and low noise of less than 0.25% rms from 20 Hz to 2 MHz. Optically pumped semiconductor laser technology produces minimal waste heat, while USB interface, available in OEM version only, enables software control of laser operation and readout of laser operating and status parameters.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Delivering 150 W at 1 kHz repetition rate and at wavelength of 10.6 µm, DIAMOND(TM) E-150 offers M² beam quality of less than 1.2 and output stability of less than ±7%. Slab discharge CO2 laser is expected to deliver MTBF of over 60,000 hours. It is suited for cutting textiles, natural leather, plastics, and thin materials; converting plastic film and papers; ceramic scribing; and wood engraving.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Powered by AAA(TM) diodes, Verdi(TM) G5 is based on optically pumped semiconductor laser technology. Unit features low noise of less than 0.03% rms and single-spatial mode output with M² less than 1.1. Built on PermAlign(TM) solder-down manufacturing platform, Verdi G5 provides reliability of more than 20,000 hours and is suited for pumping ultrafast and CW Titanium:Sapphire lasers.

Daimer Industries Inc    Woburn, MA 01801
Aug 07, 2009 Derived 100% from plants/vegetables without any ozone-depleting substances, synthetics, or VOCs, Eco-Green® Deodorizer and Cleaner removes organic matter and hydrocarbon residues in industrial settings at their source to eliminate pungent, lingering smells. Environmentally safe solution, certified as Readily Biodegradable, employs Micro-Blasting® technology and can be used with cold/hot water carpet extraction equipment, shampoo machines, steam extractors, or hand brushes.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 With optimized Novatube® construction and discharge design, LEAP laser is designed for micromachining applications in microelectronics and medical device manufacturing. Direct UV laser emission delivers per pulse energy of 650 mJ at repetition rates to 200 Hz, resulting in 130 W average power, at wavelengths of 248 or 308 nm. Primary use is intended for micro-manufacturing of small devices with smart functions - electrical, chemical, biological - and micro fluidic parts.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Suited for solar, semiconductor, and medical device manufacturing, MATRIX(TM) 532-8-100 Q-switched DPSS Laser provides 8 W of output power at 532 nm at pulse rate of 100 kHz. Unit incorporates AAA(TM) Aluminum Free Active Area pump diodes and is constructed using PermAlign(TM) component mounting technology, which uses robotic assembly methods. Laser delivers less than 2% power stability, pulse-to-pulse noise of less than 2% rms, and pointing stability of less than 15 µrad/°C.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Exhibiting noise of less than 0.1% rms and mode quality of M2 less than 1.1, Genesis(TM) CW green (532 nm) lasers are air-cooled and can be directly modulated. Genesis 532-1000 S lasers produce over 1 W of output power, while Genesis 532-500 S lasers deliver over 0.5 W. Both are based on optically pumped semiconductor laser (OPSL) technology, which is scalable in wavelength and output power.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Suited for flow cytometry and other live-cell bio applications, Genesis(TM) 355-150 S is based on optically pumped semiconductor laser technology. Unit offers true CW source of 355 nm UV laser light, avoiding potential high peak power problems arising from quasi CW lasers. With low output noise and single spatial output mode, laser is also suited for egg and fertilized-egg sorting as well as fluorescence-based applications, such as confocal microscopy.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Chameleon OPO (Optical Parametric Oscillator) utilizes periodically poled crystal and facilitates access to tunable near-IR wavelengths for multiphoton excitation microscopy (MPE). Used with any Chameleon ultrafast lasers, OPO delivers continuous gap-free tuning from 1,000 nm to over 1,600 nm with up to 600 mW of specified output power. Wavelength of Chameleon oscillator and OPO can be tuned completely independently.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 With laser head measuring 491 x 216 x 141 mm, AVIA(TM) 355-5 Q-Switched DPSS Nd:YVO4 Laser delivers 5 W of 355 nm output at 50 kHz, and is suitable for operation at repetition rates up to 150 kHz. Unit features automated harmonic crystal shifter to maintain constant output power for more than 20,000 hours. Posilock(TM) beam position sensor and feedback loop results in beam position stability over life of laser.

Autodesk, Inc.    San Rafael, CA 94903
Aug 07, 2009 Softimage 2010 delivers 3D modeling, animation rendering, and compositing functionality for visual effects creators. GigaCore III architecture optimizes data handling and speed for loading/saving large scenes and importing complex character models, while custom node creation is supported for Interactive Creative Environment systems. Along with Face Robot toolset for rigging and animating large numbers of 3D faces, features include tools and workflows for management of complex tasks.

Autodesk, Inc.    San Rafael, CA 94903
Aug 07, 2009 Optimizing productivity via various animation workflows, real-time physics, and large scene handling capabilities, MotionBuilder 2010 suits game animation pipelines, virtual cinematography, and character simulation. Story Tool with nonlinear editing capabilities accelerates handling of data for cinematics and motion editing scenes, while Actor tool exposed in Python scripting language automates setup and transfer of motion-capture data onto character.

Autodesk, Inc.    San Rafael, CA 94903
Aug 07, 2009 As digital sculpting and painting application, Mudbox 2010 empowers artists to add detail to 3D characters, objects, and environments. Integrated creative tools, workflows, and SDK aid production teams in customizing and integrating Mudbox into pipelines. Able to be used alongside Adobe Photoshop, Autodesk Maya, Autodesk 3ds Max, and Autodesk Softimage software, solution is optimized for model quality, presentation abilities, and integration with digital entertainment workflows.

Industrial Nanotech, Inc.    Naples, FL 34108
Aug 07, 2009 Designed for sloped roofs, Nansulate® Crystal clear protective coating provides thermal insulation, as well as resistance to UV, mold, and mildew. Coating can be applied over colored tile, barrel tile, clay tile, slate, wood shingle, and asphalt shingle roofs to provide energy savings by minimizing heat transfer through roof.

MIOX Corp.    Albuquerque, NM 87113
Aug 07, 2009 Able to be installed in less than 1 hr, oX-Cell(TM) includes all hardware and software needed to convert qualified existing MIOX mixed oxidant and hypochlorite on-site generating systems. This mixed oxidant electrolytic cell helps reduce operating costs via improved chlorine production, minimized salt and energy consumption, and enhanced control. In addition to energy and salt conversion efficiencies, system can improve Free Available Chlorine capacity 30-50%.