ITW Workholding    Traverse City, MI 49686
Aug 03, 2010 Featuring non-metallic composite core, N.A. WOODWOROTH ABL Chucks are available as 3-jaw, self-centering, or compensating systems in sizes ranging from 6-18 in. diameter. Quick-change jaw design allows changeovers in under 60 seconds, while Quick-Lock style mount eliminates need for master jaw sets. Composite core absorbs vibration during turning, which may eliminate unnecessary grinding operations. To prevent internal contamination, chucks are completely sealed.

Analytical Technology, Inc.    Oaks, PA 19426
Aug 03, 2010 Designed for one-hand operation, Series C16 PortaSens II contains internal sample pump and flexible sampling wand to pinpoint location of leak. Portable detector uses miniature smart sensor modules, each combining sensor, amplifier, and memory module. When installed in detector, calibration data is loaded into microprocessor so that no adjustments are needed. Additional features include backlit display and RS-232 output, which allows stored data to be downloaded to PC.

ANCA Inc.    Farmington Hills, MI 48335
Aug 03, 2010 Able to handle various batch sizes with minimal setup time, ANCA MX7 is designed to meet needs of tool production facilities. It allows for 10 sec tool change and 10 sec wheel change, and also enables off-line tool design and development using CIMulator3D software. Device's wheel changer stores 6 HSK 50 wheel packs to promote productivity and flexibility. Machine includes permanent magnet spindle for constant torque across rpm range as well as MLX loader for unmanned operation.

ANCA Inc.    Farmington Hills, MI 48335
Aug 03, 2010 Suitable for heavy-duty manufacturing and reconditioning of precision cutting and drilling tools, Model TX7+ is available with wide variety of workholding and support tooling to meet individual needs. Machine includes integrated dresser roll on headstock and automatic wheel changer, which enables up to 8 grinding wheels to be used in one set up.

Andax Environmental Corp.    St. Marys, KS 66536
Aug 03, 2010 Offering jumper-selectable High and Low settings, E-Flood® Lanterns produce uniform flood pattern. High setting provides 4,000 candela peak beam intensity and 615 lumens for up to 8 hr, while Low setting delivers 2,150 candela peak beam intensity and 330 lumens for up to 18 hr. Housed in ABS thermoplastic, units are IPx4 rated for weather resistance and include rubberized bumper, lens ring, and cushioned-grip handle. Zero-maintenance, 6 V, 12 Ah SLA battery is rechargeable up to 500 times.

Andax Environmental Corp.    St. Marys, KS 66536
Aug 03, 2010 Strion LED HP includes C4® LED and offers 10,000, 20,000, and 38,000 candela peak beam variable intensity modes, as well as strobe mode. It has multifunction, pushbutton tactical tail switch for one-handed operation. Featuring IPX4-rated design, unit integrates deep-dish parabolic reflector that produces long-range targeting beam with optimal peripheral illumination. Run time is 2, 4, or 7.5 hr, depending on intensity, and device is powered by Li-Ion battery.

Andor Technology Ltd.    South Windsor, CT 06074
Aug 03, 2010 Offering ultrasensitive scientific camera platform, vacuum-housed iXonEM+ can be applied in quantitative fashion to meet variety of experimental requirements. Camera combines photon collection efficiencies up to 95% QE with single photon sensitivity through virtual elimination of read noise detection limit. Unit offers multiple readout speeds up to 10 MHz, choice of EMCCD or conventional CCD output amplifiers, true 16-bit digitization, and Thermoelectric (TE) cooling down to -100°C.

Anti-Seize Technology Industries, Inc.    Franklin Park, IL 60131
Aug 03, 2010 Suited for straight metal threads up to 1 in. diameter, AST-SEAL HYD withstands hydraulic system pressures and exhibits resistance to water and non-polar solvents. AST-SEAL PH, designed to resist all hydraulic fluids and seal pneumatic/hydraulic systems, consists of thicker, non-running version of AST-SEAL HYD for overhead or inside machinery applications. Both are non-shredding and non-contaminating with temperature resistance of -60 to +350°F.

William Frick & Co.    Libertyville, IL 60048
Aug 03, 2010 Made of steel, WoW tag can be welded to any metal part and uses MSOP chip with UHF Class 1, Gen 2/ISO 18000-6c compliant frequency. It can be read from every direction. Featuring vulcanized rubber encasing chip on-board electronics design, FRAC Tag can be placed tightly around pipes and other tubular objects. It attaches via nylon-coated 5/16 in. braided stainless-steel cable with pre-crimped ends. Sling/Hang, same as FRAC, has loop-sized braided attachment cable for small openings.

National Instruments Corp.    Austin, TX 78759-3504
Aug 03, 2010 Suited for imaging, data logging, and multicamera industrial inspection, fanless designed EVS-1463 and EVS-1464 systems are based on Windows 7 OS. Models EVS-1463 and EVS-1463RT feature Camera Link connectivity option for high-bandwidth, low-latency, and line-scan imaging applications, while EVS-1464RT comes with GigE Vision and IEEE 1394b camera connectivity. Digital I/O and industrial communication options include EtherNet/IP, Modbus, and RS232 serial connectivity.

UNOVA Inc. / Landis Gardner    South Beloit, IL 61080
Aug 02, 2010 Featuring resin-bonded formulation that incorporates induced porosity, coarse grit, and internal lubricants, SpringSupreme(TM) Wheels are free-cutting, minimizing wheel dressing in dry spring grinding applications. Wheels can also be used with coolant, making them suited for grinding hot wound springs or any application needing large stock removal and low wheel wear.

Integrated Device Technology, Inc.    Santa Clara, CA 95054
Aug 02, 2010 Available from 2-19 output pairs, IDT series meets all requirements for PCIe Gen3 reference clock phase jitter specification. This enables development of high-throughput systems for server, embedded, and communications markets. Select devices are pin-compatible upgrades to existing IDT PCIe Gen2 timing devices. Selectable SMBus addresses and fanout buffers with integrated 2:1 input mux improve system performance and reduce component board space.

Integrated Device Technology, Inc.    Santa Clara, CA 95054
Aug 02, 2010 Designed to optimize performance of smart meters, Models 90E21, 90E22, 90E23, 90E24 feature wide dynamic range of 5,000:1, allowing manufacturers to merge various types of meters such as 5(20)A, 10(40)A, 15(60)A, and 20(80)A into one standard model 5(100)A. Programmable devices feature anti-tampering mode and are fully compliant with both International and Chinese standards.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 02, 2010 Available in 8-pin SOIC or 8-bump die Z-Scale(TM) packages, SST25WF080 is based on SuperFlash® Technology and features standby power consumption of 5 µA as well as active read current of 2 mA typ at 33 MHz. Split-gate cell design and thick-oxide tunneling injector optimize reliability and manufacturability. This low-voltage (1.8 V), 8 Mbit device also features 75 MHz clock frequency and operates across -40 to +85°C range.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 02, 2010 Operating down to 1.7 V, Model 24AA025E48 features pre-programmed EUI-48(TM)-node addresses and is also EUI-64(TM) compatible, enabling designers to add MAC addresses to existing designs on-the-fly. Address pins further enable designers to add more memory to application by allowing them to cascade up to 8 EEPROM devices onto I2C bus. Designers can add these capabilities without changing existing I2C serial EEPROM device and without serialization or programming.

Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 02, 2010 Customizable XLP 16-bit Energy Harvesting Kit, part No. DV164133, lets developers build and test solar energy harvesting applications without designing any hardware. Components include modular development board populated with PIC24F16KA102 MCU, and functionality lets users add PICtail(TM) daughter boards for evaluation of system functions and SD memory cards. Power condition and capacity are monitored by energy-conscious software algorithms, and information can be reported to PC via USB.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 02, 2010 Providing 4,096 counts/rev of absolute position feedback, AM4096 On-Axis(TM) Encoder delivers 0.1° accuracy at speeds to 60,000 rpm, making it suited for commutation, high-speed motor control, position/velocity control, and replacement of potentiometer and optical encoders. Non-contact 12-bit IC has no moving parts and offers programmable zero position. Operating from 3.3 or 5 V, device withstands temperatures from -40 to 125°C and has sleep mode for battery operation.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 02, 2010 Sealed to IP68, LM10 brings 100 m travel capability to machinery applications with high-speed, high-precision positioning requirements. Solid-state, non-contact design features read-head that rides at 0.1-1.5 mm standoff over self-adhesive magnetic strip scale, providing count for positioning with 5 µm resolution at 20 m/sec and 1 µm at 4 m/sec. Resistant to shock, vibration, and pressure, products include digital and analog output models with resolutions of 1, 5, 10, 50, and 100 µm.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 02, 2010 Constructed of stainless steel, FASTRACK features track-mounted scale that can run across gaps up to 25 mm wide. This suits large, sectional machines used in flat-panel display and PV manufacturing applications as well as large CMMs that require removal of scale for transit. System consists of 2 miniature guide rails that secure low-profile scales with 8 x 0.2 mm cross-section while allowing them to freely expand at their own thermal expansion rate with almost zero hysteresis.

Newport Electronics, Inc.    Santa Ana, CA 92704
Aug 02, 2010 Comprised of signal conditioners and PID controllers, DIN rail-mount iDR series are available with Ethernet option for connecting directly to LAN and serving Web pages over Internet. Universal signal input covers 10 thermocouples; 100 and 1,000 ohm RTDs with 2-, 3-, or 4-wire connections; Process (DC) Voltage, current, and Strain Gauge inputs. Optional outputs include Form C SPDT relays, SSRs, DC pulse, programmable isolated or non-isolated analog voltage, and current.