Edwards High Vacuum Int'l    Crawley East Susse RH10 9LW  United Kingdom
Jul 13, 2010 Featuring optimized thermal control and dust handling capability, GXS Dry Pump supports pumping requirements for silicon ingot manufacturing and laminator applications in solar industry. Tapered variable pitch screw profile allows for tight clearances without need for rotor coatings and enables compression variations along rotor axis. Measuring 0.4 x 1.1 x 0.8 m, pump produces less than 64 db(A) noise and users inert, non-oxidizing oil to lubricate gears and bearings.

The Dolomite Centre Ltd    Royston SG8 5TW  United Kingdom
Jul 13, 2010 Promoting advances in droplet microfluidics, Micro Droplet Systems lets users produce more than 10,000 monodispersed droplets per second. System, built around proprietary microfluidic pumps, connectors, and chips, is specifically comprised of Pressure-based Droplet Starter System, Syringe-based Droplet Starter System, and Droplet Advanced System. Applications include compartmentalized chemistry, high throughput experimentation, and formation of monodispersed emulsions or beads.

ZMD    Dresden   Germany
Jul 13, 2010 Offered in Starter and Lab kits, ZIOL2401 evaluation tools help designers reduce time to production by enabling them to develop and test both the master (controller) and sensor end of link. Starter Kit, comprised of USB stick, MCU board, and ZIOL2401 IC, lets designers implement serial interfaces and control basic I/O and switching functions, while Lab Kit, comprised of 3 boards, offers partitioned design that helps engineers develop complex applications.

Servomex Group Ltd    Crowborough East Su TN6 3DU  United Kingdom
Jul 13, 2010 Using plasma emission detector to provide accurate, stable, and reliable measurement, SERVOPRO Plasma can continuously measure Nitrogen in pure Argon as well as Nitrogen impurities in pure Helium and Argon. Features include 0-1, 0-10, and 0-100 ppm standard ranges and automatic ranging, which optimizes output resolution per parameters. While Ethernet and Internet connectivity enhances remote communication options, fault alarm and contact alarm systems increase operational safety.

Newport Corp.    Irvine, CA 92606
Jul 13, 2010 Occupying 50 mm footprint, URS50BCC and URS50BPP provide backlash-free, continuous rotation with MTBF of up to 20,000 and minimal wobble. Offering 6 µm eccentricity and facilitated integration, products have 2-part bearing design with pre-tempered steel gears and bearings. DC motor version, URS50BCC, with index pulse for precision homing, suits applications that require bi-directional positioning. Stepper motor version, URSBPP, suits less demanding, precision rotation applications.

Machine Solutions Inc.    Flagstaff, AZ 86001
Jul 13, 2010 Used for assembly of PTA and other specialty catheters, SW675S Automated Marker Band Swaging Equipment addresses requirements of peripheral devices with band-to-band spacing for longer PTA product (300 mm). Profile-driven system also works with mapping catheters and similar items requiring positioning and swaging of up to 20 marker bands. Pick and place feeding option reduces operator variability with continuous, automated batch processing.

Monotype Imaging Inc.    Woburn, MA 01801
Jul 13, 2010 Available in text and display versions, ITC® New Esprit(TM) typeface series is characterized by text designs with strong serifs, moderate contrast in stroke weight, and ample lowercase x-height to aid readability. Text fonts are also designed with slightly wide proportions and sturdy thin strokes to help ensure optimum readability at small text sizes. In all, 16 typefaces are available in 4 weights, from regular to black, each with italic counterpart.

NCCS    NewPort Beach, CA 92660
Jul 13, 2010 Offered as standalone In-Process-Verification (IPV) tool, NCL/IPV enables users to run verification and machine simulation software independently of their current programming software. It runs in conjunction with PostWorks universal 2- to 10-axis postprocessor generator and creates environment with flexibility within programming and machine simulation. Together, capabilities strengthen development of custom postprocessors as well as machine simulation.

Fluke Corp.    Everett, WA 98203
Jul 13, 2010 Used to calibrate SPRTs, PRTs, and thermistors, 1594A/1595A Super-Thermometers offer speeds as fast as 1 sec per measurement with accuracy as good as 0.06 ppm. Ratio Self-Calibration lets users test accuracy or calibrate resistance ratio linearity of measurement circuit. Users can also calibrate internal reference resistors using resistance calibration function and external resistor. In ~30 min accuracy and performance can be verified automatically by pressing one button.

Aimtec, Inc.    Dollard Des Ormeaux, QC H9G3B9  Canada
Jul 13, 2010 Along with input voltage ranges of 9-36 Vdc and 18-75 Vdc and tight line/load regulation of ±0.5%, AM40UW-Z series offers remote ON/OFF function, output voltage adjustment (trim), load voltage sensing, and various built-in protections. RoHS-compliant products, supplied in 2 x 2 x 0.4 in. case, are available with single 3.3, 5, 12, or 15 Vdc and dual ±12 or ±15 Vdc output. Power density is 10 W/in.², and efficiency is rated up to 92%.

GRABNER INSTRUMENTS Messtechnik GmbH    Wien A-1220  Austria
Jul 13, 2010 MINIDIS ADXpert mini-distillation analyzer allows for precise testing of various gasoline, jet fuel, and diesel products as well as biofuels, solvents, aromatics, organic liquids, chemicals, and contaminated or blended samples. Featuring rugged housing and durable metal sample cups, unit requires as little as 6 mL of sample. It incorporates automatic rinsing, sample introduction, and cleaning programs and yields results that are within ASTM D86 r/R requirements.

Akron Coating & Adhesives, Inc.    Akron, OH 44301
Jul 13, 2010 Developed for use with Santoprene® and other thermoplastic elastomers, ACA 30-101, 102, and 103 often eliminate need for primers and surface treatments. Water-based, heat-activated adhesives cover entire spectrum of TPE grades from soft to very hard, while delivering peel values up to and exceeding 25 lb/linear in. Products help minimize time required to manufacture overmolded products used in appliance, medical, automotive, packaging, and construction applications.

McElroy Manufacturing, Inc.    Tulsa, OK 74158
Jul 13, 2010 Designed for butt fusing polyethylene pipes, Model 1LC is available in 2 models, one that requires 100-120 V input and another that operates on 200-240 V. System uses locking cam to maintain necessary force during cooling cycle of fusion process and incorporates 3.8-to-1 mechanical advantage. In addition to Centerline Guidance System that provides equal distribution of force around joint, machine includes serrated jaws and inserts to keep pipe from slipping during fusion.

Elma Electronic Inc.    Fremont, CA 94538
Jul 13, 2010 Available in desktop, portable, and rackmount design options, Type 39 enclosures feature EMC-compliant design and meet CE and FCC requirements. Front of chassis is powder-coated gray, with range of color options available. Units can include standard enclosure feet as well as rubber, plastic, or tilt feet.

SpectorSoft Corp    Vero Beach, FL 32960
Jul 13, 2010 Using Spector CNE Investigator v7, employers can monitor websites visited, emails, chats and IMs, keystrokes, files transferred, documents printed, and applications run. Through surveillance-like camera tool, program shows in exact visual detail what employee does throughout day. Software also includes Control Center Server, profile-based recorder settings, social networking behavior recording for Facebook and blog forms, as well as time and date stamps on screen snapshots.

CUI, Inc.    Tualatin, OR 97062
Jul 13, 2010 Available in wide range of output voltages, ETSA series external power adapters meet Level V efficiency standards and exceed current U.S. EISA 2007 efficiency regulations. Compact, high-effiency power supplies also include UL and GS safety approvals. They can be used in applications such as wireless communication, portable equipment, networking, and peripherals.

TE Connectivity Ltd.    Berwyn, PA 19312
Jul 13, 2010 Featuring overmolded, 13 mm profile and segmented solder area, 4-rail compact medium junction box is used for terminating foils of PV panel and also helps solar industry OEMs conserve potting material when connecting solar panel foils. It can be applied on back sheet of solar panels with silicon glue or double-sided adhesive, and connecting pads are located in separate rectangular openings for defined and facilitated soldering of cross connects.

Metalfab, Inc.    Vernon, NJ 07462-0009
Jul 13, 2010 Built for continuous operation, bag dump hopper provides dust-free way of dumping and filling process systems with material received in paper bags. Baffle and bin vent, which attaches to central dust collector, or optional bin vent filter over dump area maintain dust-free work environment while providing means to discharge dry solids products. Respectively, hinged door and expanded metal grid keep foreign materials and bag pieces from falling into process stream.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jul 13, 2010 Designed to extend USB connections via high-speed Fiber Interface, Model 4162 Host and Model 4169 4-port Hub are suited for environments subject to high EM or RF interference that might corrupt USB communications over copper interface. Four-port hub provides USB standard of 500 mA per port. Operating from 0 to +50°C, system offers true plug-and-play operability with support for Windows®, Mac OS®, Linux® and all USB device types at up to 480 Mbps.

ARPAC    Schiller Park, IL 60176
Jul 13, 2010 POWER SERIES increases labor efficiency by allowing for entire wrap sequence to be completed without forklift operator getting off of truck. Upon completion of cycle, stretch wrapper automatically clamps, cuts, and secures film to pallet to prevent it from unraveling. Wraper features 72 in. dia turntable that protects film clamp from damage during loading/unloading and is completely portable when used with optional portable air compressor.