Morse, M.K., Co., The    Canton, OH 44711
Aug 05, 2010 Available in 1, 1¼, and 1½ in. sizes, M-Factor CH Blades are engineered for cutting case hardened materials, while M-Factor GP Blades handle general purpose cutting of carbon steels and stainless steels. Made of sub-micron grade carbide, blades feature triple chip tooth profile and are available in variety of band widths and thicknesses.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 05, 2010 Model AD9644 dual-output ADC consumes 423 mW at 80 MS/sec and features multi-stage, differential-pipelined architecture with output error correction logic. At 70 MHz and 80 MS/sec, it achieves SNR of 73.7 dBFS and SFDR of 92 dBc. ADC is available in 48-lead LFCSP package, while single output AD9641 is offered in 32-lead LFCSP, both incorporating JESD204A data converter serial interface standard with coded data rate that supports up to 1.6 Gbps per link.

Smart City Holdings, LLC    Las Vegas, NY 89118
Aug 05, 2010 Designed to streamline provision and sale of Internet services, Smart Connexion is intended for small and mid-sized convention facilities that do not have dedicated technical or customer service staff. All order processing, billing, credit card security, and financial reporting systems are built in to system. In addition, Smart Connexion provides interfaces needed for venue to communicate effectively with event managers on Internet orders.

Genedata AG    Basel CH-4016  Switzerland
Aug 05, 2010 Part of Genedata Phylosopher® biological data management system, PatentExplorer assesses patent situation of novel biomolecules and targets. Interdisciplinary solution integrates patent information to provide comprehensive and structured analysis of patented biomolecule sequences, related claim information, and freedom-to-operate, facilitating IP evaluation from business and biological standpoints. Functionality handles commercial data sources and publicly available patent information.

Acoustical Solutions, Inc.    Richmond, VA 23228
Aug 05, 2010 AudioSeal(TM) sound blanket line will include AlphaEnviro(TM) Baffle, AudioSeal(TM) Drop Tile Ceiling Sound Barrier, AlphaEnviro(TM) Wall Panel, AudioSeal(TM) Pipe and Duct Wrap, AlphaFlex(TM) Banner, and PolyWrap(TM) Baffle. Each contains Knauf Insulations's formaldehyde-free Ecose Brand Fiberglass, which is manufactured from naturally occurring and/or recycled raw materials, bonded using a bio-based technology, and 100% recyclable.

Scotchman Industries, Inc.    Philip, SD 57567
Aug 05, 2010 Able to swing 45° right or 60° left, 20 in. DS-20 horizontal band saw comes with quick-slide vise, 1¼ in. blade, saw guides with carbide inserts, and remote control console. Hydraulic clamping and head lift combine to provide semi-automatic cycle control Respective capacities for this general-purpose band saw at 90°, 45°, and 60° are 14 in. high x 20 in. wide, 14 x 14 in., and 14 x 10 in. Minimal maintenance is required.

Toolmex Corp., Machinery Div.    Schaumburg, IL 60193
Aug 05, 2010 Optimizing access to work pieces during setup and measurement, TUR630MN and TUR710MN series Manual Plus CNC long bed lathes are available as 25 or 28 in. swing over bed with 78, 118, or 157 in. between centers. Machines include independent overhead swivel control station to avoid cable damage, while absolute encoders on feed motors for z- and x-axis eliminate need for homing. Also incorporated are 4.1 or 5.5 in. spindle bores, with speeds up to 2,500 rpm on 4.1 in. bore.

Tornos    Lombard, IL 60148
Aug 05, 2010 Available with or without guide bush, single-spindle Gamma Turning Centers offer 1-2 tool systems and can handle parts up to 20 mm in diameter. Gamma 20/6 provides 6 linear axes, while Gamma 20/5 offers 5 linear axes. Ergonomic design provides access to all tool positions, while automatic lubrication unit, swarf tray, and removable oil pan facilitate maintenance.

AZCO Corp.    Fairfield, NJ 07004
Aug 05, 2010 Blister card cutting system, BCS(TM), allows original format of blister cards to be cut into different sizes. After operator places blister cards into this unit, it will automatically cut to size. This reduces waste, tooling cost, and delivery time. Offered as bench-top or in-line model with blister machine, product plugs into 110 Vac outlet and features vertical magazine. Feeding to shear cutting station is automatic, and machine is also capable of rounded corners and radius cuts.

Eaton    Pittsburgh, PA 15108
Aug 05, 2010 Featuring both integral ground fault protection and communications capabilities in single device, C440 and XT Relays directly monitor motor current in each phase and identify conditions that can lead to motor failure. Customers can select motor protection features they need, with selectable trip class, ground fault detection, phase imbalance, and full load current adjustment. DeviceNet(TM), PROFIBUS(TM), Modbus®, Modubus TCP, and Ethernet IP communication protocols are supported.

Elemental LED    Emeryville, CA 94608
Aug 05, 2010 Apollo Controller can control DMX devices, such as wall washers and PAR cans, or drive 3 channels of PWM to control LED lighting fixtures, such as strips and bars. Dual-mode solution comes with software that lets user visually design custom lighting scenes on computer, load them into Apollo, and play them back through lighting fixtures without computer. Functionality accommodates needs of artists, business owners, or anyone who needs pre-programmed custom content.

Larson Electronics, LLC    Kemp, TX 75143
Aug 05, 2010 Offering choice of white light, IR light, or various colors, Models LED-24SD-C and LEDLB-16ESD feature separate control wire that enables operators to feed variable voltage or pulse trains to make light strobe at specific Hertz levels or control rate of dimming. Control wire input can be used for pulsing with pulsing frequency range of DC to 1 kHz with duty cycle of 0-98% at 1 kHz. Operating from 9-48 Vdc supply, emitters feature control voltage of 1.8-40 V peak to peak.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 04, 2010 Model PH20 utilizes infinite rotary positioning and unique head touch capability for high-speed point capture with minimal CMM movement. Additional time savings are achieved by synchronizing motion of head and CMM between measurements, and inferred calibration technique determines head orientation and probe position in single operation, allowing subsequent measurements at any head angle. Designed for use with TP20 touch-trigger probe, it fits machines using shank or quill mounting.

Rollomatic, Inc.    Mundelein, IL 60060
Aug 04, 2010 Model 528XS GrindSmart series 5-axis grinder is suited for regrinding/modification grinding and manufacturing of rotary cutting tools. Machine includes PentaSmart software for endmills, drills, and step tools, as well as BurCalc software for bur production. Integration of robot is optional.

Rollomatic, Inc.    Mundelein, IL 60060
Aug 04, 2010 Model 628XS, GrindSmart series 6-axis grinder for manufacturing rotary cutting tools and inserts features rotary glass scale on tool rotation axis. Machine's software features interpolation capability and unit also optimizes surface finish on flute and ball relief. It is designed for producing endmills, drills, step drills, form tools, reamers, taps, and any derived variations, as well as surgical and orthopedic cutting tools, and is capable of insert periphery grinding.

Rollomatic, Inc.    Mundelein, IL 60060
Aug 04, 2010 Incorporating fifth axis, ShapeSmart NP5 can grind flats and unround surfaces on cylindrical parts. Machine utilizes 2 different grinding wheels running on separate spindles and positioned on independently controlled CNC linear slides. Roughing and finishing are performed in one pass, eliminating separate process. Applications include form grinding of cutting tools blanks as well as production grinding of precision punches and die and mold components.

Rollomatic, Inc.    Mundelein, IL 60060
Aug 04, 2010 VGPro is designed to help operators and programmers facilitate environment of efficiency and collaboration within organization. It includes Simulator engine v6.0 for high-speed simulation of any tool design. Program aids in design of endmills, including ballnose, corners, and tapers, as well as helically, sheared, and straight form tools and profile inserts.

CIMCOOL®    Cincinnati, OH Oh. 45209
Aug 04, 2010 Designed for moderate to heavy-duty operations, CIMTECH 609® is suitable for use with most aluminum alloys, titanium, exotic alloys, cast iron, carbon steels, high-speed steel, high alloy steels, and stainless steels. Product offers drawability and biological protection for use in recirculating systems. With no smoke and minimal residue, low-misting fluid leaves no slippery film on parts, machinery, or floor. Corrosion inhibitors allow use on both ferrous and non-ferrous applications.

CIMCOOL®    Cincinnati, OH Oh. 45209
Aug 04, 2010 Featuring hybrid blend of patented and synthetic lubricants, CIMTECH 610® provides synergistic performance on difficult-to-machine ferrous and non-ferrous alloys without corrosion or stain. Product is suited for use on hard, brittle metals, such as inconel, titanium, stainless steel, aerospace alloys, and hardened steel. Formulated without chlorine, sulfur, or phosphorous EP lubricants, low-foaming fluid offers near neutral pH and corrosion control.

Huffman Corp.    Bridgeport, WV 26330
Aug 04, 2010 Designed for welding oxygen sensitive or reactive materials like titanium, Model HP-245ACC can be configured with features such as antechambers, inert gas handling and purification systems, oxygen and moisture sensors, and part handling devices to match end user's specific needs. Applications include weld restoration on worn surfaces of turbine engine components like blades, vanes, shrouds, seals, and BLISKS or IBRs. System is also capable of 3D freeform fabrication.