Microchip Technology, Inc.    Chandler, AZ 85224 6199
Aug 13, 2009 Combining 10/100Base-TX PHY, MAC, and hardware cryptographic security engine, ENC624J600 standalone, IEEE 802.3(TM)-compliant, 100 Mbps Ethernet interface controllers can connect to any PIC® microcontroller via industry-standard SPI or flexible parallel interface. Each has unique, factory-preprogrammed MAC address as well as 24 KB configurable SRAM for packet transmit/receive buffering and data storage. Products help designers create network- and Internet-connected embedded applications.

SiTel Semiconductor BV    Hertogenbosch   Netherlands
Aug 13, 2009 Featuring Fast Ethernet 10/100 MAC and hardware cryptographic engine, SC14452 enables secure and energy-efficient enterprise VoIP and cordless telephone applications. Net system power for VoIP desktop phone based on SC14452 is 353 mW in idle mode, 556 mW during G.722 call, and 567 mW during G.729AB call. The 16-bit CompactRISC(TM) processor plus 2 user-programmable Gen2DSPs deliver 240 MIPS of processing power, and PAEC, 32 kHz codec, and integrated class D amp optimize sound quality.

Ophir-Spiricon Inc.    Logan, UT 84321
Aug 13, 2009 Designed for laser beam measurement applications, Models SP503U and SP620U accurately capture and analyze wavelengths from 190-1,550 nm, both continuous wave and pulsed mode. Cameras have resolution of 640 x 480 pixels and 1,600 x 1,200 pixels, respectively. Able to synch up to 1,000 Hz, built-in photodiode trigger includes firmware that analyzes background lighting and provides offsets, allowing triggering on variety of energy levels, including energies down to 10 µJ.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 13, 2009 Suited for avionics, military, and space applications, CECC-qualified Bulk Metal® Foil RS92N, RS92NA, and AN Resistors feature low TCR of ±2 ppm/°C from -55 to +155°C, tolerances from ±0.01%, and load-life stability of ±0.005% at +70°C for 2,000 hours at rated power. Measuring 2.5 x 7.5 x 8.0 mm, Model AN offers resistance range of 80.6 W to 92 kW, while Models RS92N and RS92NA offer resistance up to 120 kW.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 13, 2009 Designed to meet and exceed requirements of MIL-PRF-22097, Char. F, Bulk Metal® Foil Accutrim(TM) 1202 Potentiometers have multi-fingered, noble metal wiper traversing planar surface of etched foil. Units feature end-to-end TCR of ±10 ppm/°C and ±25 ppm/°C through wiper, load life stability of 0.1%, and less than 0.05% settability. Offering infinite resolution, potentiometer features resistance range from 2 W to 20 kW and resistance tolerance from ±5%.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 13, 2009 Comprised of 2-resistor VFB1012D voltage divider, 3-resistor VFB1515N, and 4-resistor VFB2028N, Bulk Metal® Z-Foil SMT resistor networks provide absolute TCR of ±0.05 ppm/°C from 0-60°C and ±0.2 ppm/°C from -55°C to +125°C, +25°C Ref. Characteristics include PCR tracking of ± 5 ppm at rated power and load life stability ratio of ±0.01% (100 ppm) for 2,000 hours at +70°C. Thermal stabilization time is less than 1 sec, rise time is 1.0 ns,, and resistance range is 100 W to 30 kW.

Delcam International Inc.    Windsor Ontario N8W 5J1, CD   Canada
Aug 13, 2009 Offering wide range of material textures, accessories, and features, ShoeDesign allows different design concepts to be created and evaluated. Delcam CRISPIN 3D viewer allows 3D designs to be communicated to clients for comment. Adjustments to design can be made within minutes then resubmitted for approval. Development of styles is controlled through Activities toolbar, which covers complete process from import of last shape through to export of finished design.

Midwest Motion Products    Watertown, MN 55388
Aug 13, 2009 Accepting 24 Vdc power source, Model MMP-D22-376F-24V T-07 measures 2.25 in. diameter x 5.4 in. long with 0.25 in. diameter x 0.79 in. long output shaft. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C. At 2,600 rpm, reversible servo motor delivers 35 oz-in. torque and 210 oz-in. peak torque. It requires 3.4 A at 24 Vdc to generate full load torque.

Stafford Mfg. Corp.    Wilmington, MA 01887
Aug 13, 2009 Available in 6 pipe sizes from ¼ to 1¼ in. I.D., Stafford Stackable Pipe Mounting Collar System features 2-piece clamp style collars with flats on outside surfaces that are drilled and tapped and accept threaded stainless steel rod. Teflon® bushings conform to pipe I.D. to allow for thermal expansion and absorb vibration. Offered in aluminum, steel, and stainless steel, system provides access to multiple pipes and can be isolated via stand-off.

EAO Switch Corp.    Milford, CT 06460
Aug 13, 2009 Designed with concern for public transport vehicles, Series 56 Multi-Tone Sound Module (MTSM) will emit range of different sounds according to change in status of equipment or machinery. It connects on each side of glass through one central hole with minimal fixing screws and is sealed to IP69K from front. Built to be shock- and vandal-resistant as well as flame-retardant, MTSM is pre-programmed with 5 standard tone sequences but can be modified according to end-user requirements.

EAO Switch Corp.    Milford, CT 06460
Aug 13, 2009 With behind-panel depth of 44 mm, Series 71 is suited for space-restricted control panels. Switches offer colored lenses with choice of illuminated symbols including on/off design, plus ring and center spot illumination. Aluminum dome lens is also available in variety of colors for flush-mounting actuators. Suitable for voltages ranging from 5 Vac/10 mA to 250 Vac/3 A, switches are protected to IP65 from front for use in general industrial environments.

Stotz USA LLC    Freeport, IL 61032
Aug 13, 2009 Designed for high-production, tight tolerance parts, MRA Air/Electronic Column integrates measurements and SPC data without PC. System features 12 in. touch screen and 4 bays that allow electronic cards or air-electronic cards to be inserted. With each card able to host 4 measurements, MRA can simultaneously measure 16 air, 16 electronic, or any combination of both signals. Operating from 110 V, 19 in. rack-mountable device includes Ethernet, USB, serial, and digital I/O ports.

Greyline Instruments, Inc.    Massena, NY 13662
Aug 13, 2009 Featuring automatic temperature compensation and accuracy of ±0.25%, OCF 4.0 uses non-contacting ultrasonic sensor to measure wastewater flow through flumes or weirs. Other features include built-in data logger with on-screen flow reports plus Windows software to retrieve, display, and graph flow reports in fully customizable formats. Supplied with isolated 4-20 mA, 0-5 V, USB, and RS232 outputs, monitor allows calibration/adjustment via built-in 3-button keypad and menu system.

GreCon, Inc.    Tigard, OR 97224
Aug 13, 2009 Designed to help extinguish sparks or burning embers in production equipment used in small facilities, fully automatic Model GWS 3/32 has 3 hp motor with 32 gallon tank that can support up to 3 extinguishment nozzles. Pump requires minimum inlet pressure of 40 psi and minimum outlet flow of 75 gpm. When spark detection system triggers activation of extinguishing device, booster pump's motor will engage when lower pressure limit is reached and boost water pressure to required level.

Steinmeyer Inc.    Bedford, MA 01730
Aug 13, 2009 Weighing 2 kg, Model MP63 combines DC gear motors, rotary encoders, lead screws, and non-contact limit switches in fully enclosed assembly. Unit provides 25 mm stroke in each direction with 5 micron accuracy and ±1 micron repeatability. Standard straightness and flatness is ±3 microns. Cable connectors are located on one end, and, as option, assembly can be made clean room compatible.

Meggitt (Maryland), Inc.    Germantown, MD 20876
Aug 13, 2009 Providing acceleration range of 80 g, top-exit Model 786A-M12 and side-exit Model 787AM8-M12 offer +5% sensitivity tolerance, while side-exit Model 787BM8-M12 offers +10% sensitivity tolerance. Equipped with M8 mounting screws, 100 mV/g vibration sensors are suited for applications such as motors, pumps, fans, and compressors. Connector-cable assemblies come in IP67 rated versions for environments up to 257°F and IP68-rated molded versions for environments up to 194°F.

Vertiflo Pump Company, Inc    Cincinnati, OH 45249
Aug 13, 2009 Available in 3, 4, and 6 in. sizes, self-priming Series 2100 offers capacities to 1,300 gpm and heads to 112 ft TDH. Units feature back pullout design, external impeller adjustment, self-flushing seal chamber, and oversized, tapered bore. Constructed of cast iron, 316 stainless steel fitted, all 316 stainless steel, CD4MCu fitted, or all CD4MCu, pumps are suited for liquids entrained with solids, pulp and paper, mining, meat packing, raw sewage, sludge, slurries, and wastewater.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 13, 2009 Integrating iCoupler® digital isolation technology and isoPower® DC-DC converter, which can operate at 5.0 or 3.3 V, iCoupler® ADuM640x Digital Isolators each provide quad-channel data isolation and 500 mW power isolation in single unit. Housed in 16-lead SOIC package, devices offer 5 kVrms medical-grade isolation for patient monitoring and other medical equipment, and include thermal shutdown feature to ensure safe operation.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 13, 2009 Suited for utility subsystem control, 8-channel AD7606 (16-bit) and AD7607 (14-bit) simultaneous-sampling ADCs achieve SNR of 90 dB and offer optional oversampling mode that helps reduce code spread and enhance anti-alias rejection. Multi-channel integration facilitates 3-phase I/V measurement and neutral monitoring, while true bipolar analog input ranges of ±5 and ±10 V allow for preservation of phase information while sampling bipolar voltages and currents over wide dynamic range.

Asset InterTech Inc.    Richardson, TX 75080
Aug 13, 2009 Used with ScanWorks® platform for embedded instrumentation, Dispatcher manages application of tests and diagnostics to unlimited number of local or remote PCBs in parallel. Solution works in conjunction with ScanWorks' Remote Instrumentation Controller Model 1000 and facilitates tracking of test results, which are formatted as XML files. Functionality can reduce number of testers needed, and API simplifies customization of UI or integration into test environments.