WealthCounsel, LLC    Madison, WI 53744-4403
Aug 14, 2009 Using WealthDocx(TM) v7, practitioners can draft Wills, Revocable Living Trusts, Irrevocable Trusts, Special Needs Trusts, Partnership Agreements, LLC Operating Agreements, and Business Succession and Charitable Planning documents. In addition to state-specific templates, program includes interview and library interface, Irrevocable Trust system with Domestic Asset Protection Trust assembly, integrated tutorials, and Dynamic Intelligence help system.

Milliken & Co.    Spartanburg, SC 29304
Aug 14, 2009 Designed to meet needs of automotive and appliance industries, Hyperform HPR-803 replaces high loadings of heavy mineral fillers, such as talc, while delivering balance of stiffness and impact strength. Product also offers high heat deflection temperatures and comparable surface finish to talc-filled compounds that cannot be achieved with chopped glass fiber reinforcement.

Mountz, Inc.    San Jose, CA 95112
Aug 14, 2009 Manufactured to comply with Class 100 Clean Room standards, CRS Series is polished and sealed with PTFE-impregnated, anodized coating. External components are corrosion resistant, and smooth skin seals prevent transportation of any contaminants into clean room. With models ranging from 0.7 ozf-in. to 120 lbf-in., hand tool series features cam-over design that prevents fastener/bolt from being over-torqued. Series also features tamper-proof internal adjustment.

Mountz, Inc.    San Jose, CA 95112
Aug 14, 2009 Designed to detect cross-threading, omissions, unfinished rundowns, and cycle incompletes, Scout Screw Counter verifies that all fasteners are installed and seated to tool's preset torque setting. Programmed manually through keypad, Scout provides audible and visual indications that assembly has been completed or rejected, and displays type of fastening error on screen. Scout can store multiple fastener settings and offers password protection to prevent tampering.

Granger Plastics Co., The    Middletown, OH 45044
Aug 14, 2009 Inground Safety Shelter (I.S.S.), installing in new or existing homes, features double wall structural design, manufactured from polyethylene. Aluminum door exceeds FEMA 320 standard, while 3-step ladder with hand rails and gas-assisted shock on door ease entrance. Offering shelter during high winds or tornadoes, it seats 3-5 adults in molded circular seating.

Blasters, Inc.    Tampa, FL 33637
Aug 14, 2009 Designed to liquefy weathered and hardened paint, curing compound, tack, or sealer, Liquidator(TM) features truck or tractor mounted cleaning head that discharges 20,000 or 40,000 psi water blast from self-contained water supply. Cleaning path from 5-19 in. can be blazed from multiport nozzle bar with Twist Lock Shroud(TM). Providing continuous production removal rates from 1,500-2,000 linear ft/hr, system eliminates need for chemicals and abrasives and has vacuum capability for automated clean up.

Blasters, Inc.    Tampa, FL 33637
Aug 14, 2009 Ready Jet® blasts away residual concrete inside concrete mixer drums with single-operator ultra-high water pressure wash system. Boom-mounted washer is operated wirelessly and no human entry into mixer drum is required. Mobile and self-contained, system can be used in front- and rear-discharge mixed concrete trucks and can be used in any weather condition. With optional handgun kit, system also cleans truck mixer exteriors.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 14, 2009 ADP2118, 3 A step-down, dc-dc synchronous regulator, includes low on-resistance switching FETs and features internal loop compensation, power-good indicator, precision enable, tracking, and synchronization to simplify design of POL power systems. It features 600 kHz or 1.2 MHz of fixed switching frequency and operates from 2.3-5.5 V range. Output voltage is adjustable from 0.6 V to input voltage, and it is available in preset output voltage options of 3.3, 2.5, 1.8, 1.5, 1.2, and 1.0 V.

Ecliptek Corporation    Costa Mesa, CA 92626
Aug 14, 2009 Offered in 3.2 x 5.0 and 5.0 x 7.0 mm packages, 32.768 kHz ceramic surface mount crystal clock oscillators EB13K5 and EB13K7 (3.3 Vdc) and (2.5 Vdc) EB15K5 and EB15K7 are available in variety of configurations including frequency stabilities as low as ±20 ppm maximum and wide operating temperature ranges of -40 to +85°C. Oscillators are suited for industrial controls, office equipment, consumer electronics, portable instrumentation, and other general purpose RTC applications.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Aug 14, 2009 Featuring cdma2000® perceptual evaluation of speech quality (PESQ) measurement, model 8960 provides objective measurement of audio quality in digitally vocoded voice. It predicts vocoder speech quality using algorithm recommended by ITU-T P.862 standard, and rates downlink and uplink voice quality on scale of 1-5 for comparison of results. Using any of 3 built-in real-time vocoders, male/female sample voice is applied to phone and resulting voice signal is compared to reference.

GAO Embedded Inc.    Toronto 12345  Canada
Aug 14, 2009 Suited for single mode fiber measurement, Model 2498 can be used as optical power meter, stabile light source, or loss measurement system. It delivers CW mode light signals, and offers measurement resolution of 0.1-1 dB in W display mode or 0.01-0.1 dB in REL display mode. Device carries out optical loss measurement at 0.85, 1.30, 1.31, and 1.55 µm, with measurement range of 3-70 dBm or 20-50 dBm. Choice of power sources include AC adaptor, rechargeable Ni-Cd battery, and dry cells.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 13, 2009 Suitable for portable and battery-powered instruments, dual-channel Model ADA4051-2 features Auto-Correction Feedback Loop ripple-suppression technology to provide low offset voltage of 2-15 µV. Rail-to-rail I/O helps provide dynamic range greater than 110 dB, while chopper architecture enables device to achieve PSRR and CMRR of 135 dB. Operating from 1.8-5.5 V single power supply, zero-drift op amp draws 17 µA and provides 125 kHz gain bandwidth.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA K2V1A6
Aug 13, 2009 Designed for 144-port and 288-port GLX4000 physical layer switch, T1/E1/J1 telecommunications port card supports 24 bidirectional RJ48C ports, individually configured for T1, E1, or J1 data rates. It runs at data rates of 1.544 Mbps for T1/J1 interfaces and 2.048 Mbps for E1 interfaces. Capable of passing data encoded in AMI, B8ZS, and HDB3, it is hot-swappable and also allows reclocking data rates to be individually set or disabled for each port.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA K2V1A6
Aug 13, 2009 Suited for signal and image processing applications including radar, sonar, and signal intelligence, Model VPX3-450 combines Xilinx Virtex-5 FPGA node, 1 GHz dual-core Freescale 8640D processor node, and on-board PCI Express switch. Device includes sensors for monitoring board temperatures and FPGA power consumption, multi-board synchronous clock, and support for ChipScope Pro and JTAG processor debug interfaces. With compact 3U form factor, VPX3-450 is suited for UAVs and land vehicles.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 13, 2009 Housed in 8-pin µSOP, 7-bit I²C-controlled Model DS4432 features 2 output channels, each providing fine control of DC-DC power supply by sinking or sourcing current directly into power supply's feedback node. Full-scale output currents are set between 50-200 µA using one external resistor for each channel. Through I²C bus, output currents can then be set to any of 127 linear sink or 127 linear source steps up to maximum full-scale value.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA 20175
Aug 13, 2009 Model VPX6-187 is based on Freescale 8-core QorIQ(TM) P4080 Communications Processor and supports each of its eight 1.5 GHz Power Architecture(TM) processor cores with datapath acceleration logic as well as network and peripheral bus interfaces. Designed to offer trusted computing environment in harsh military and aerospace applications, this 6U VPX general-purpose SBC comes in air- and conduction-cooled configurations with various I/O and connectivity options.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 13, 2009 Operating from -40 to +85°C, Model DS8313 performs level translation between host microcontroller and 5, 3, or 1.8 V smart card, while providing up to 80 mA for smart-card operation. Unit includes ±8 kV ESD protection to prevent damage to application during card insertion and removal. Designed for ISO 7816 and B-CAS applications, DS8313 is suited for pay/premium TV, financial terminals, consumer set-top boxes, SIM card readers, and smart-card reader products.

Maxim Integrated Products    Sunnyvale, CA 94086
Aug 13, 2009 Supplied in 3 x 3 mm, thermally enhanced, 10-pin TDFN package and specified over -40 to +125°C range, MAX15027-MAX15030 operate from 1.425-3.6 V input and deliver up to 1 A or 500 mA output current (depending on model). Additional bias input on MAX15028/MAX15030 lets devices be powered from independent supply and allows regulator input to reduce current to 2 µA (max) during shutdown. Accuracy is ±2% over line, load, and temperature ratings.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Aug 13, 2009 Featuring 2 integrated resistors on one substrate, ACAS 0606 AT offers high film temperature of +155°C, has max power dissipation rating of 0.125 W per resistor, and is AEC-Q200 qualified. Device is offered with resistance values from 47 W to 150 kW in 2 equal or different resistor values, with maximum resistance ratio of 20:1. Other features include defined tolerance matching down to 0.1% and TCR tracking down to 10 ppm/K.

Okazaki Manufacturing Company    Rhondda Cynon Taff CF15 7AF  United Kingdom
Aug 13, 2009 Able to be applied in thicknesses exceeding 2.54 mm and up to 5.08 mm, SDC-4 plasma flame sprayed coating increases life of thermowells in critical Fluid Catalytic Cracking Units (FCCU) in oil refineries and also reduces associated maintenance/repair. Solution is applied to tip of thermowells, providing corrosion resistance in harsh operating temperatures and pressures. Coating does not alter/distort component or substrate.