O. F. Zurn Co.    Philadelphia, PA 19132
Jul 22, 2010 When machining difficult metals, ZURN BOOSTER KUT Additives extend life of used and depleted cutting oils and can boost machining capabilities of ineffective fluids. Products can also prevent pickup and chip weld onto machined parts, and mitigate detrimental effects of lube oil dilution by fortifying contaminated cutting oil.

Amprobe    Miramar, FL 33025
Jul 21, 2010 Model INSP-3 verifies building wiring compliance to electrical code and shows test data such as voltage drop under load, hot and neutral voltage drop, voltage with load, and ground impedance on large display. Incorrect wiring or voltage drop test failure are indicated by flashing screen. Operating from voltage of 95-140 Vac ±2%, ±2 digits, unit offers user selectable 0, 10, 15, and 20 A loads, tests GFCI and AFCI operations, and also measures fault currents.

Amprobe    Miramar, FL 33025
Jul 21, 2010 Offering accurate 4-terminal measurement, portable MO-100 enables users to check windings opens/shorts in motors, generators, and transformers; wire-to-wire connection resistances; heating elements testing; and contact resistance in critical electrical connections. Range maximums vary from 200.0 mW to 2,000 W, with min resolution of 100 µW. Protected against over-temperature and overvoltage conditions, instrument delivers accuracy of ±0.5% of reading ±2 digits over 5 to 131°F range.

Anderson Power Products    Sterling, MA 01564
Jul 21, 2010 Providing interconnection between 2 perpendicular power bus bars, Power Clip electrical power connector is used in N+1 rectifier, power supply, and switching power supply applications. Clip accepts solid .125 in. thick nickel or gold plated rectangular bus bar tab and is rated for up to 300 A of continuous service. It meets UL1977 and CSA standard C22.2 No. 182.3-M1987 and is UL-approved for true hot plug current interruption of 100 A at 48 V and 200 A at 42 V using gold bus bar tab.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 21, 2010 Model DS1877 controls and monitors all receiver functions for SFP and SFP+ optical modules, with full support for SFF-8472 specification. It monitors 4 analog channels, including temperature, VCC, and 2 external differential signals, and loss of signal is continuously monitored in both receiver channels. Contained in 5 x 5 mm, 28-pin TQFN package, SPF video controller is specified over -40 to +95°C temperature range and eliminates need for MCUs and software development.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 21, 2010 Drawing 1.5 µA battery power in standby mode, MAX36051 provides 128 Bytes of nonimprinting memory to securely store sensitive data. Internal tamper monitors and tamper detection inputs interface with external sensors, while on-chip battery-backup controller monitors main power and automatically switches to battery when main power is too low or not present. Housed in 4 x 4 mm CSBGA package, MAX36051 is specified from -40 to +85 and is suited for secure USB, power meters, and POS applications.

Green Edge Systems, Inc    Woodland Hills, CA 91364
Jul 21, 2010 Sure Check (iQuality) HACCP food Inspection System helps manage Hazard Analysis & Critical Control Points (HACCP) and inspection programs for large food services. System combines PDA, temperature data acquisition, and web-based software to automatee monitoring of quality risk factors and unsafe conditions. Compliance records include execution timing, HACCP, recall alert action status, missing checklists, top violations, violation details, single checklist detail, and a daily summary.

The Dolomite Centre Ltd    Royston SG8 5TW  United Kingdom
Jul 21, 2010 Suited for initial exploration of droplet microfluidics, Pressure-based Droplet Starter System provides all pumps, connectors, and chips necessary for immediate production of monodispersed droplets from 20-150 µm dia with tolerance of ±1%. Modular system operates over 0-10 bar pressure range and is chemically resistant. While providing pulseless and stable liquid flow, system features lockable pressure chamber and 3-way chamber lid that allow simultaneous pumping of up to 3 liquids.

Palmer Manufacturing & Supply, Inc.    Springfield, OH 45504
Jul 21, 2010 Designed to fit all brands of high-speed continuous sand mixers, Palmer FATTBlades(TM) consist of 2 blades that are as wide as discharging chute. They create turbine which discharges mixed sand at increased velocity. These alloy steel blades also prevent sand from reaching end of mixing chamber, and sand is also prevented from staying in chamber longer than necessary. Functionality lessens build-up on mixer shaft, blades, and discharge chute.

Control Microsystems Inc.    Kanata, ON K2K2A9
Jul 21, 2010 Along with object-oriented database and scalable client/server architecture optimized for WANs, ClearSCADA 2010 has integrated historian that provides automatic data backfill. Connectivity to external databases through linked tables faciltates collaboration and integration, while Windows authentication allows for centralized management of passwords and disabled user accounts. Other features include consequential alarms, alarm filtering, and real-time and historic EFM data gathering.

ON Semiconductor, LLC    Phoenix, AZ 85008
Jul 21, 2010 Supplied in hermetically sealed, 5.0 x 7.0 x 1.9 mm ceramic CLCC-6 SMD package, PureEdge(TM) NBVSBAxxx series provide 0.5 ps jitter reference clock. It meets requirements of 2.5 and 3.3 V low voltage positive emitter coupled logic (LVPECL) clock generation applications and offers tri-state enable/disable feature. High Q fundamental mode pullable crystal and PLL multiplier is used to provide frequencies from 60-700 MHz, with pullable range of ±100 ppm and frequency stability of ±50 ppm.

Emerson Process Management    Austin, TX 78754
Jul 21, 2010 Available in sizes NPS 14-24 and ASME Class 150 and 300, Fisher® Control-Disk(TM) valve delivers optimal throttling performance for applications that involve fast processes and varying pressure drops. Control range promotes adherence to setpoint, regardless of process disturbances, and soft and metal seals are available. Able to work with existing piping, valve is designed for installation between ASME Class 150 or Class 300 raised-face flanges with flangeless or single-flange bodies.

Citizen Systems America Corporation    Torrance, CA 90501
Jul 21, 2010 With network cards, Citizen Printers can be managed remotely, providing up-to-the-minute diagnostics information. Day-to-day issues, such as out of media or ribbon notifications, can be configured so that email messages are displayed locally for warehouse staff, while major issues, including IT problems, can be communicated remotely to specific members of staff, such as network managers. Also available, Compact Ethernet card supports TCP/IP printing and web configuration.

ESI Group    Bloomfield Hills, MI 48304
Jul 21, 2010 Enabling multi-domain analysis with single core model, Virtual Performance Solution 2010 manages complex simulation scenarios while balancing functional requirements. Program spans crash, impact, and occupant safety analysis; motion and dynamics; and thermal analysis; as well as Noise, Vibration, and Harshness analysis. NVH allows engineers to go beyond crash and safety analysis to solve linear harmonics, transient structural, and acoustic problems in parallel.

Doosan Infracore America Corp & Eng Center    West Caldwell, NJ 07006
Jul 21, 2010 Puma 2600SY has structurally stable bed that absorbs low-frequency/high-amplitude forces of rapid acceleration/deceleration and vibration associated with heavy cuts. System has 24-position turret with 7.5 hp motor that turns live tooling at up to 5,000 rpm. Designed for parts with up to 14.8 in. dia and 29.9 in. long, unit also includes 35 hp spindle motor that generates speeds up to 4,000 rpm, while y-axis movement is achieved by linear interpolation and synchronous movement of X1 and X2 axes.

STMicroelectronics    Lexington, MA 02421
Jul 21, 2010 Designed to help reduce size of surge protectors for electronic equipment, SMxJ and SMxT Transil(TM) series provide specified energy absorption capability up to max operating temperature. There are 6 series in range offering surge energy from 100-1,500 W (10/1,000 µsec pulse). Surge capability at max junction temperature ESD protection meets IEC 61000-4-2 and MIL-STD-883G Specified with 8/20 µsec surge to meet IEC 61000-4-5 for electrical over-stress Leakage current specified at 85°C.

Novellus Systems, Inc.    San Jose, CA 95134
Jul 21, 2010 SABRE 3D electroplating system has modular architecture that delivers processes such as copper through-silicon vias, copper redistribution layers, pillars, under-bump metallization, and lead-free micro-bumping. Enabling multi-layer processing, system includes TurboCell(TM) technology for through-resist plating applications that improves film uniformity and alloy consistency. It also features in-line isotropic wet etch process that allows independent control of plated copper fill and overburden.

DuctSox    Dubuque, IA 52002
Jul 21, 2010 Intended for HVAC applications in chemically harsh environments, ChemSox(TM) air dispersion system is constructed from recyclable, inert HDPE fabric with PVC-coated webbing. It comes in round, pliable lengths of semi-translucent fabric that use zippers to join sections together; sections come in lengths to 50 ft and diameters from 6-56 in. High-Throw design delivers air throws of up to 75 ft and uniform linear array of orifices for even air distribution.

Meggitt Sensing Systems (Endevco Corp.)    San Juan Capistrano, CA 92675
Jul 21, 2010 Endevco® model EM40PS enables acoustic measurements on planar and curved surfaces exposed to air slipstreams. It features ISOTRON®, IEPE-type amplifier; dust-free, water-repellant grid cap; and can be laid flat on its 2 in. dia rubber pad or surface-mounted using double-sided adhesive pad. Front vent by side of diaphragm enables pressure equalization. Operating in temperatures from -4 to +176ºF, microphone has sensitivity of 5 mV/Pa at 250 Hz and audio frequency range of 20 Hz to 20 kHz.

AICSYS, INC (Advanced Industrial Computer Systems)    Taipei Hsien   Taiwan
Jul 21, 2010 Suited for horizontal and vertical mounting, Hawkeye WMC-402M supports standard micro-ATX motherboard, 1 external 5.25 in. drive bay for CD-ROM/DVD-ROM, and 1 internal 3.5 in. drive bay for HDD. System is powered by micro-ATX 300 W power supply and utilizes 8 cm ball bearing fan to optimize cooling. Featuring heavy-duty steel construction, chassis is designed for PC-based Digital Video Recording systems for security, monitoring, access control, and other safety applications.