Cypress Semiconductor Corp.    San Jose, CA 95134
Aug 09, 2010 Intended for high-end machine vision market, VITA 25K features pipelined and triggered global shutter, 25 MP resolution, and 32, 10-bit digital LVDS outputs that enable transfer of image data over standard industry protocol. Each channel runs at 620 Mbps, which results in 53 fps rate at full resolution for undistorted images and fast readout. Offering 35 mm optical format with monochrome or color digital output, sensor has 5,120 x 5,120 active pixels with 4.5 x 4.5 µm pixel size.

Emerson Network Power - Embedded Computing    Tempe, AZ 85282
Aug 09, 2010 Model COMX-430 and COMX-440 COM Express® modules feature Intel® Atom(TM) D410/D510 processors at 1.66 GHz coupled with up to 4 GB DDR2 memory. They connect to standard PC interfaces including LCD and CRT displays, SATA and legacy PATA disks, PCI Express and PCI peripherals, USB devices, and GbE networks. Measuring 95 x 95 mm and based on Type 2 COM Express pin out, units support range of solid state disks via SATA interface or CompactFlash via IDE interface on carrier.

Emerson Network Power - Embedded Computing    Tempe, AZ 85282
Aug 09, 2010 Supporting Liebert MPX and Liebert MPH rack PDU product lines, Avocent DSView 3 and Avocent Power Manager plug-in deliver real-time monitoring, metering, alarms, notifications, and management capabilities. Avocent DSView 3 enables secure out-of-band, centralized management of all connected IT and network devices in complex and geographically dispersed data centers. Avocent Power Manager adds power monitoring capability to access and control functions of Avocent DSView 3.

Emerson Network Power - Embedded Computing    Tempe, AZ 85282
Aug 09, 2010 Measuring 2 x 4 x 1 in., NPS20-M series supports up to 25 W with convection cooling and up to 40 W with forced air cooling. Products can operate at full load in temperatures from 0 to +50°C (or 80°C with derating) and offer average efficiency of 87%. Comprised of 5 models, series offers outputs from 5-48 V and consumes less than 300 mW under no-load conditions. Products accept 90-264 Vac (127-300 Vdc) and offer ±20% user output voltage adjustment as well as remote sense.

JAI, Inc.    San Jose, CA 95134
Aug 09, 2010 GigE Vision-/GeniCam-compliant, AD-081GE provides independent shutter/gain control for each monochrome 1/3 in. CCD (1,024 x 768) so details can be captured in scenes with wide variation of light intensities. Standard features include image fusion capabilities for merging outputs from 2 sensors and high S/N mode that averages video information from 2 CCDs to produce single image with low noise. Three selectable HDR modes can produce high dynamic range output without any post-processing.

Safety Technology International    Waterford, MI 48327
Aug 09, 2010 Featuring 140° x 40 ft detection zone, Model STI-46100 plays music while informing user that someone has entered area. Motion sensor is mounted on wall and receiver is plugged into any electrical outlet within operating range. Switch enables users to select alarm or 13 different sounds. Suitable for indoor or outdoor use, battery-powered chime offers 32 individual privacy codes to protect against outside interference.

Safety Technology International    Waterford, MI 48327
Aug 09, 2010 Measuring 10.875 x 8.875 x 3.625 in., Model STI-7520 is secured with key lock, while Model STI-7521 is secured with thumb lock. See-through, multi-purpose cabinets guard against vandalism, either accidental or intentional, as well as dirt, windblown dust, and rain. To further protect against misuse, optional piercing horn alarm and/or strobe light is available. Designed to mount on wall, enclosures are suitable for use when installing fire alarm control panels outdoors.

STEMMER IMAGING LTD    Surrey   United Kingdom
Aug 09, 2010 Featuring embedded digital signal processor for intelligent, real-time image processing, Xenics Bobcat-1.7-320 is suited for inspection and QC applications using subsurface NIR inspection and thermal imaging capabilities between 300-800°C. Sensitive InGaAs detector is suitable for low light levels and does not require cooling. GUI facilitates camera control and image acquisition, and PC connection is accommodated via standard Ethernet or optional CameraLink interface.

Synopsys, Inc.    Mountain View, CA 94043 4033
Aug 09, 2010 Available in 40 and 55 nm process technologies, DesignWare® 96 dB Audio IP targets consumer electronic applications requiring Hi-Fi playback and record capabilities with minimal power consumption and silicon area. Modular nature lets designers select specific features for target applications, while function set covers signal processing, signal conditioning, clock management, power management, and Class G drivers.

FORCE America    Burnsville, MN 55337
Aug 09, 2010 Leveraging MS Silverlight capabilities, Mobile Resource Management helps fleets maximize on- and off-road equipment productivity. Web-based platform's mapping and routing functionality also promotes optimal visibility. Closest qualified and available technician is deployed to jobsite and is routed efficiently; address and driving directions can be emailed/texted from dispatcher to technician during job; and fleet-wide daily activities can be reviewed at any time.

Crown Equipment Corp.    New Bremen, OH 45869
Aug 09, 2010 Designed to accommodate Plug Power GenDrive(TM) fuel cells, PC 4500 Series Center Control Pallet Truck incorporates controls and gauges for fuel cell into dashboard. This negates need for operator to stop operation to access control box and check fuel cell status. Able to operate in conditions as low as -20°F, truck features fuel cells behind operator and offers features such as power steering, Access 1 2 3® technology, and ergonomic X10® handle.

Ethernet Direct    Newburyport, MA 01950
Aug 09, 2010 Suited for factory floors and industrial office complexes requiring aesthetic design, Falcon FWI-705 links 2 or more separate networks to create single expanded LAN network. Unit features built-in 4 dBi directional antenna and supports 3 different operation modes, including Access Point, Repeater, and AP + WDS. To secure information, product comes with 64/128/152-bit WEP encryption and WAP function. Falcon FWI-705 is compliant with IEEE 802.3, IEEE 802.3u, and IEEE 802.11b/g standards.

Sieb & Meyer USA, LLC    Cincinnati, OH 45242
Aug 09, 2010 Designed to serve as drop-in replacement for obsolete PMC-400, PMC-450, and PMC-550 control systems, Series 8 CNC uses PC for operator interface and motion controller for precise, high-speed printed circuit board routing. Part program compatibility for ATI and Excellon legacy data is included, as well as common PCB routing features such as tool life management, pressure foot/vacuum control, and tool diameter compensation based on distance routed.

Clore Automotive    Lenexa, KS 66215
Aug 09, 2010 Compatible with conventional, AGM, gel cell, spiral wound, marine, and deep cycle batteries, SOLAR's PL2216 controls several variables through each phase of charging process to ensure each battery serviced gets optimal charge. Active filtering technology with charge control circuitry adjusts power delivery based on characteristics of battery being charged, while smart clamp technology provides reverse polarity protection, eliminates sparking, and protects against operator error.

Clore Automotive    Lenexa, KS 66215
Aug 09, 2010 Suited for keeping seasonal-use batteries in top condition, SOLAR's Model 1002 is 1.5 A underhood 12 V automatic battery charger. It can be mounted under hood of vehicle for on-board charging using included battery attachment kit. Operator runs extension cord to charger when vehicle requires battery maintenance, and automatic operation provides worry-free charging. To extend service life, product comes in weather-resistant, plastic case.

Sunnen Products Co.    St. Louis, MO 63143
Aug 06, 2010 Able to size and finish hard-coated small-engine cylinders to micron-level accuracy, SV-1000 Series utilizes TC superabrasive tools designed for blind, ported cylinder bores. Modular system is designed for part diameters from 0.120-2.56 in., and includes 10 hp, 100-4,000 rpm spindle. Measuring 95 x 91 x 107 in., unit includes servo-controlled stroking drive and load-sensing tool feed system that senses where and how much to hone bore. Fully automated versions can support up to 4 spindles.

Tungaloy America, Inc.    Wood Dale, IL 60191
Aug 06, 2010 Designed to reduce interference with workpiece, YWMT inserts can be used for wide array of copy turning. They enable chip control using ZF chip breaker for finishing or ZM chip breaker for semi-finishing. Units are offered in CVD coated carbide T9025 grade used for general turning of various steels, and PVD coated cermet GT730 grade for finishing and hard turning applications.

Vollmer of America Corp.    Carnegie, PA 15205
Aug 06, 2010 Combining rotary erosion and fluting with polishing wheel, Model QXD 200 provides mirror-like finish in single machine setup. Machine features 6 programmable axes as well as 6-position tool changer, which allows for flexibility in electrodes and polishing wheel selections that can be utilized in unattended operation. Offline simulation creates 3D model that can be incorporated into other software packages for verification of end results on tool geometry.

Zoller Inc.    Ann Arbor, MI 48108
Aug 06, 2010 Intended for tool manufacturing industry as well as grinding and sharpening companies, »pom« Series Process Oriented Measuring Machines utilize CCD color cameras for precise inspection of cutting edge in incident light. Six-fold magnification provides option to measure both small and large tool geometries simultaneously. Automatically displayed in clearly laid-out overview table, measuring results can be printed, stored in ZOLLER database, or directly transferred to network.

Poindus Systems GmbH    Taipei 114  Taiwan
Aug 06, 2010 Based on Intel Pineview D-410/D-510 CPU that supports up to 2 GB DDRII memory, VariPOS(TM) 715 features scratch-resistant 15 in. color TFT LCD with 1,024 x 768 resolution. Utilizing projected capacitive technology, screen supports multi-touch function and permits intuitive, accurate operation. I/O connections include 4 x RS-232, 4 x USB 2.0, 1 x RJ-11, 1 x RJ-45 GigE port, and 1 x printer port. Featuring IP65-rated waterproof front panel, system is suited for retail and hospitality applications.