Link-Assistant.com
Minsk 220000  Belarus
Feb 20, 2008 Rank Tracker v4.0.5 suits webmasters and professional SEOs who need to monitor their site's positions in 257 search engines. It allows users to check web site rankings for as many websites as needed, and keeps daily/weekly/monthly change record to notify them where the site ranks for any search term, at any time. Software creates graphs that demonstrate progress visually, and generates illustrative reports containing rankings, KEIs, and other relevant analytical data.

K-Tek
Prairieville, LA 70769
Feb 20, 2008 Model LM3D provides automated volume measurement and mass calculations of bulk materials. Device uses rotating laser head for multipoint laser scans to measure uneven surface of stored materials, creates 3D map of surface, and on-board microprocessor calculates stored material's volume and mass. LM2D incorporates non-contact sensor to measure conveyor speed and scanner head that scans profile of flowing material. On-board microprocessor calculates volume and mass throughput in real time.

Micronas GmbH
Frieburg D-79108  Germany
Feb 20, 2008 HVC 22xyA and HVC 24xyA 8-bit microcontrollers combine all logic functions, peripheral modules, and LIN bus interface in single device. Devices integrate 5 and 2.5 V regulators, true EEPROM, watchdogs, and power-driver electronics. Internal voltage regulators operate directly from automobile's 12 V supply and withstand load dumps of up to 40 V. Subsystem includes LIN 2.0 physical layer interface, 10-bit queued ADC, 3 multithreshold comparators, op-amp, and multiple interrupt inputs.

Agilent Technologies, Inc
Santa Clara, CA 95051
Feb 20, 2008 Model W1314A-E01 enables users to effectively deploy, optimize, and troubleshoot Mobile WiMAX networks by identifying coverage and interference problems. It supports up to 8 frequency bands, which allows 2.3, 2.5, and 3.5 GHZ Mobile WiMAX networks to be monitored by single, compact solution. Measurement receiver comes with built-in high sensitivity GPS that offers enhanced position-reporting performance in dense urban environments and in many indoor situations.

Sparta Systems, Inc.
Holmdel, NJ 07730
Feb 20, 2008 With ability to automate compliance tracking, employee qualification and training, opportunity management, and account opening, TrackWise Customer-Centric Process Management for financial services addresses cross-organizational customer experience initiatives for banks, brokerages, and insurance companies. It offers full compliance with all FDIC/NAIC/FSA(TCF)/FCAC guidelines and recommendations, and customizable levels of management controls and audit information.

Abacalab, Inc.
Wilmington, DE 19806
Feb 20, 2008 Chemistry Labacus® v2.1 mobile laboratory assistant captures chemical manipulations in lab and translates them to English text on desktop. Integrated with Labacus® mobile capabilities, it enables freehand reaction sketching, Sigma-Aldrich® reagent reference, and automated stoichiometry calculations. Desktop portal software offers chemistry drawing, spreadsheet calculations, and word processing.

Iwaki Walchem Corp.
Holliston, MA 01746
Feb 20, 2008 Intended for tank farm transfer, bulk chemical distribution, chemical filtration/circulation, and general process pump service, MXM Series process pump includes motor sizes from 2-5 hp, flows to 165 gpm, and heads to 146 ft. Non-contact bearing system provides for dry run operation without damage to pump, while self-radiating bearing system transfers frictional heat from bearing area to prevent damage during upset operating conditions.

Air Science USA
Fort Myers, FL 33906
Feb 20, 2008 Advanced line of Ductless Fume Hoods feature 100 fpm face velocity that ensures containment of fumes as well as alarm that alerts operator when airflow falls to unacceptable level. Switches and electrical components are totally isolated from dirty airflow and away from any contamination. Main filter is available in 14 different types of carbon, including specialty media for vapors of organics, solvents, acids, mercury, and formaldehyde. HEPA filters are also available.

Schaefer, Inc.
Ashland, MA 01721
Feb 19, 2008 Series CW5300 water-cooled, 8,000 W DC/DC and AC/DC converter modules are suited for extreme environments in various industries. They are available in 5 standard dc input voltage ranges from 80-800 Vdc as well as 3-phase ac input voltages including 3 x 200 Vac, 3 x 400 Vac, and 3 x 480 Vac. Single outputs are available in 9 standard ranges spanning 14-400 Vdc. All outputs are adjustable and fully regulated to 0.2% or better for load and 0.1% for line.

National Semiconductor Corp.
Santa Clara, CA 95051-0695
Feb 19, 2008 Consuming of 100 mW (typ) per channel, PowerWise DS50EV401 supports PCIe Gen1 (2.5 Gbps), PCIe Gen2 (5 Gbps), and PCIe Gen3 (8 Gbps) data rates. Solution compensates for transmission medium losses, reducing deterministic jitter on 4 data transmission channels. Receive boost of 20 dB equalizes up to 10 m of PCIe cable or 40 in. of FR-4 PCB at data transmission rates up to 5 Gbps, with less than 0.2 unit intervals of residual jitter at equalizer output.

Flexaust Co., Inc., The
Warsaw, IN 46581
Feb 19, 2008 Designed to OEM specifications, Dayflex® MG-Stretch seamless, extruded, and overlapped hose features 3:1 or 5:1 stretch ratios depending on size and construction. Product is available in PVC or urethane and PVC blended compounds with coated wire to meet manufacturer requirements for stretch as well as resistance to chemicals and abrasion. Offered in 1¼-2 in. ID sizes and lengths to 50 ft, RoHS-compliant hose can be equipped with shuttle molded cuffs or end fittings.

Interstate Specialty Products
Sutton, MA 01590
Feb 19, 2008 Performed in clean-practice, positive-pressure facility, Digital Die-Less Cutting Service permits multiple on-the-fly part modifications for rapid prototyping. It offers non-metallic parts with intricate shapes, including narrow cross sections and close hole spacing, in sizes from less than 1 in. square to 60 x 120 in. with ±0.005 in. tolerances. End-user sends/specifies materials to be cut; submits DXF, PDF, or other drawing file; and receives parts for approval within 2-3 days (typ).

Extrude Hone Corp.
Irwin, PA 15642
Feb 19, 2008 Suited for small to medium-sized workpieces that may be inherently delicate or intricate, CoolPulse 200(TM) electrolytic machine deburrs, polishes, stress relieves, and cleans in one finishing process. Machine can remove rough surfaces from 2.5-5 µm Ra and produce smooth surfaces down to 0.1 µm Ra, providing bright or mirror-like finish on stainless steel and bright to matte finish on aluminum. Electrolyte used in process consists of chilled, non-fuming, odorless, near-neutral solution.

Dorner Mfg. Corp.
Hartland, WI 53029 0020
Feb 19, 2008 Designed for light- to medium-duty applications, 2200 Series offers perforated bed plate option on conveyors 12 in. or wider to accommodate cooling and draining applications. Conveyors include instant belt tensioning and V-guide bed plate for positive belt tracking. Offered in lengths from 18 in. to 18 ft, conveyors feature load capacity up to 80 lb, belt speeds up to 276 fpm, and belt widths from 1.75-24 in.

Morgan Advanced Ceramics
New Bedford, MA 02745
Feb 19, 2008 Intended for hermetic packages used for relays, fuses, fiber optic connections, and IC packages, Pressed Glass Spacers are available in lengths from .070-.155 in. and inner diameters from .026-.063 in. Standard tolerance in all dimensions is ±.002 in. Offered in green, blue, black, and white, spacers withstand temperatures required for PCB applications, and are also suitable for positioning and isolating electrically sensitive components during wave soldering.

Phidgets, Inc.
Calgary, AB T2M3R7  Canada
Feb 19, 2008 Intended for wide range of applications, PhidgetInterfaceKit 0/0/8 allows users to control, from any PC, 8 DPDT relay outputs that are rated at 250 Vac or 2 A, for maximum of 65 W. It has maximum switching voltage of 250 Vac and 220 Vdc, 10 µA wetting current, 10 mV voltage, and quiescent and active current consumption of 14 and 380 mA, respectively. Unit also offers 18 msec operating and releasing time and 20 contacts/minute switching speed at maximum load.

Pacific Instruments, Inc.
Concord, CA 94520
Feb 19, 2008 Designed for Series 6000 DAQ System, Model 6037 is 8-channel strain gage and transducer signal conditioning-amplifier-digitizer that automatically ranges gain according to signal level. Excitation is programmed in 1 V steps from 0-12 V, while 4-pole, low-pass filter provides bandwidths from 1 Hz to 1 kHz with programmable selection of filtered or wideband output. Unit features 16-bit Adc that digitizes transducer signals at programmable sample rates up to 10,000/channel.

Phoenix Contact
Harrisburg, PA 17111 0100
Feb 19, 2008 FKCN 2.5 spring-cage plug connector allows rigid and flexible wires with ferrule to be connected quickly without any tools. Large wire entry supports flexible wire ferrules, and wires can be disconnected using orange actuation levers. Measuring 19 mm high, accompanying CCDN 2.5 is double-level, pin-in-paste base header. When used together, FKCN 2.5 and CCDN 2.5 support trend of smaller electronics components by creating free space on board.

Tharo Systems Inc.
Brunswick, OH 44212 0798
Feb 19, 2008 Offered as accessory for H-400/H-600 Series of thermal/thermal transfer bar code label printers, PA2000t Label Printer/Applicator applies labels to top or side of varying height and width products. Unit measures 15 x 32 x 30 in. and features remote front panel for easy access regardless of applicator orientation. With or without computer attached, PA2000t is automatic or semi-automatic and applies labels from 2 x 1 to 4.5 x 8 in. in size.

SICK STEGMANN, INC.
Dayton, OH 45413
Feb 19, 2008 Designed for use in dirty/dusty environments with water washdown cleansing, Model DFS 60 reduces potential for contamination by dust, dirt, or water, delivers from 1-65,536 ppr, and operates in temperatures ranging from -20 to 100°C. Available with TTL or HTL interface, it features nickel code disc that supports operation in heavy duty industrial applications. Radial/axial cable outlet reduces installation depth and allows single encoder type to be used for various applications.