NOTIFIER Fire Systems    Northford, CT 06472
Feb 20, 2012 Marine ONYX® systems provide fire protection for many nautical environments - oil platforms, luxury yachts, support craft, ships - and feature added protection against airborne particulates, moisture, and electrical RFI. Scalable fire alarms, suited for basic applications to complex installations requiring large numbers of devices, are approved for narine applications from U.S. Coast Guard, Lloyd's Register, and American Bureau of Shipping.

Saelig Co., Inc.    Pittsford, NY 14534
Feb 20, 2012 Suited for use with any oscilloscope, Aim-TTi I-Prober 520 allows observation and measurement of current flow by placing insulated tip onto PCB track. Handheld unit can also be used on other conductors, such as captive wires, components, IC pins, and PCB ground planes. General-purpose H-field probe, based on fluxgate magnetometer principle, measures track currents from 10 mA to 20 A (pk-pk), with bandwidth of DC to 5 MHz. Low noise equivalent is less than 6 mA rms at full bandwidth.

Mini-Circuits    Brooklyn, NY 11235
Feb 20, 2012 Operating from 3-5 Vdc supply, surface mount Model PSA4-5043+ provides IP3 as high as 33 dBm, output power levels up to +21 dBm, and on-die ESD protection rated to over 500 V, making device suited for wide range of 50 MHz to 4 GHz applications. MAC Ceramic Hermetic Mixers, covering frequency range from 0.3-12 GHz, feature LO levels from 4-17 dBm. Devices deliver broadband performance suitable for instrumentation, with case that meets/exceeds aerospace and military ground requirements.

OMEGA ENGINEERING LIMITED    MANCHESTER M44 5BD   United Kingdom
Feb 20, 2012 Suitable for hydraulic and pneumatic systems, PXM309 series pressure transducer has 1 msec response time and wetted parts that are of fully welded stainless steel for compatibility with industrial fluids or gases. Process connection is G1/4A (¼ in. BSPP male) stainless steel fitting, and 25 pressure ranges are available from 0-70 bar to 0-700 bar. While electrical terminations include 2 meter flying lead, mini DIN, or M12 connectors, electrical outputs can be either 0-10 Vdc or 4-20 mA.

Omega Engineering, Inc.    Stamford, CT 06907
Feb 20, 2012 Providing 8 thermocouple input channels and 8 digital I/O channels configurable for alarms, OM-WEB-TC Series supports thermocouple types J, K, T, E, N, R, S, and B. Embedded web interface provides viewing access to thermocouple data and configuration settings using standard web browser. Equipped with cold junction compensation and open thermocouple detection, modules are suited for remote monitoring of temperature data in any type of manufacturing or R/D facility.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 20, 2012 Supporting creation of signal scenarios using 5-7 GHz spectrum, M8190A simultaneously delivers wide bandwidth and high resolution with up to 80 dBc of spurious-free dynamic range. Capabilities such as switching between 14-bit output at 8 GSPS and 12-bit output at 12 GSPS help engineers handle multiple applications and measurement requirements. Along with support for output formats such as NRZ, DNRZ, RZ, and doublet mode, generator features 3 amps optimized for different applications.

Berkeley Nucleonics Corp.    San Rafael, CA 94901
Feb 20, 2012 Designed for SAM Isotope Identifiers, WiFi-SAM Kit provides continuous data feed over local WiFi networks to network administration or management team. Isotope Identifiers are used by first responders or Hazmat technicians who may desire guidance from Radiation Safety or Health Physics management. By integrating WiFi in SAM 940 Defender and SAM 940 Revealer, multiple experts can view data concurrently and in real-time.

LPR Global    Toronto, ON M5S2R4
Feb 20, 2012 Made of aluminum alloy, with lead content less than 0.01%, Tube Fittings and Valves are installed using threaded lok-type connection method, with no welding required. Units provide clear visual confirmation of installation, guaranteeing airtight sealing. Available in ¼-¾ in. sizes, fittings have anodized surface that optimizes hardness as well as corrosion and wear resistance. Ferrules and O-rings are specially designed to be used with R22 and R410A refrigerants and oils.

Pfannenberg    Lancaster, NY 14086
Feb 20, 2012 While conforming to SIL 1 and SIL 2 requirements, Model DS 10-SIL has 110 dB(A) SPL output and cast aluminum housing. It provides dependable signaling on machinery and heavy equipment in industrial environments. Self-monitoring circuitry and fault-indicating contact closures alert of failure or initiate shut down/lock out of machinery until corrective action can be achieved. Additional features include menu of 32 unique alarm tones and ability to remotely trigger up to 4 selected tones.

Ohmite Mfg.    Rolling Meadows, IL 60008
Feb 17, 2012 Measuring 38 mm tall x 35.2 mm wide, R Series Heatsinks utilize cam-clip, which eliminates need for screw hole. Since no screws are required for device mounting, additional fins can be added to rear side of heatsink for maximum total surface area and optimal thermal performance. Designed to attach TO-220 or TO-247 components, clip has self-aligning features and provides same amount of force after repeated use.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Feb 17, 2012 Equipped with interchangeable double ribbon and paddle agitators, multipurpose 42NSD-1S has max working capacity of 1 cu-ft and suits laboratory- and pilot-scale blending requirements. Inner and outer helical ribbons are pitched to move material axially, in opposing directions, and also radially for accelerated, thorough blending. Installed along bottom of trough, discharge extruder assembly enhances mixing, eliminates dead zones, and enables 100% complete discharge.

Primary Cutter, LLC/SUPERMILL    Berlin, CT 06037
Feb 17, 2012 Offered in sizes from ¼-1 in. dia, SUPERMILL TOMCAT 5-flute carbide endmills run at high rpm and feed rates for rapid stock removal. Tool geometry enables feed rates of 200 ipm on steels, alloy steels, and stainless steels, allowing users to perform more high speed finishing radial cuts instead of slower roughing cuts, which can help speed production time. Sharp corner, corner radius, regular length, long length, and stub length endmills are available.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Feb 17, 2012 Optimized for use on thicker materials and larger diameter wires, Invision 450 MPa offers dual wire feeder capability and 450 A of pulsed MIG welding power at 100% duty cycle. Pulsed MIG programs are included for steel, metal-cored, aluminum, stainless steel, nickel, silicon bronze, and copper nickel .052 and 1/16 in. wires. One-knob controls automatically adjust pulse parameters to match wire feed speed, and controls provide robust, stable pulsed MIG arc at very low arc length.

Flambeau    Baraboo, WI 53913
Feb 17, 2012 Measuring 15 x 3¼ x 14 3/8 in., Quick View Carrying Cases include secure latches and built-in carrying handle for safe transport. Deep Base Model 6960AB features open core design suited for large or bulky supplies, while Divided Core Model 6961AB provides deep fixed and removable dividers. Divided Base Model 6962AB has removable tray that sits on top of divided area, providing not only additional bulk storage space, but also acting as secure lid to prevent migration of supplies below.

Flambeau    Baraboo, WI 53913
Feb 17, 2012 Molded in clear PET with translucent PP lids, 694xAB Twisterz(TM) jars come in 2 diameters and 2 heights. Base of one jar twists clockwise or counterclockwise into lid of another jar of same diameter. Different diameters and heights facilitate organization of small supplies, such as brads, embellishments, buttons, office supplies, small stamps, and beads. Part numbers are 6940AB (Small/Short Jar), 6941AB (Small/Tall Jar), 6942AB (Large/Short Jar), and 6943AB (Large/Tall Jar).

Crouse-Hinds Div., Cooper Industries, Inc.    Syracuse, NY 13221
Feb 17, 2012 Designed to fit existing cabinet space and wiring configurations, ZoneIT provides pluggable module that lets users upgrade surge protection for new and existing traffic controllers. It employs 3-stage hybrid circuitry, delivering protection with 3 outlets. Primary stage offers 50 kA protection to entire cabinet, while secondary stage includes RFI filtering and ensures electronics are fully protected. Additional features include thermal overload, over-current, and short circuit protections.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Feb 17, 2012 By ensuring ATC gripper aligns tool with extreme precision, ATC Alignment Tool prevents collision and potential damage, extending machine tool, cutting tool, and tool holder life. Tool may also be used to align ATC gripper to magazine tool pockets. Unit has built-in stylus that determines high/low values when plug is slowly rotated. Values are displayed on 10 micron/div dial indicator and reveal eccentric direction.

Haydon Kerk Motion Solutions    Waterbury, CT 06705
Feb 17, 2012 With 0.0006 in./step resolution and max load of 3 lb-ft, Microslide Linear Actuator is optimized for microfluidics and optical positioning applications. Microslide is 0.87 in. W x 1.0 in. H and provides up to 2.5 in. stroke. Equipped with 15000 Series 0.59 in. can-stack stepper motor, unit has self-lubricating polyacetal load carriage, supported by stainless steel guide rods with Black Ice® TFE coating. Kerk® leadscrew comes in 0.012, 0.016, 0.020, 0.039, and 0.079 in. leads.

Eastex Products, Inc.    Holbrook, MA 02343
Feb 17, 2012 Available in 54 and 60 in. rolls, Medical Fabrics are suited for fabricating inflatable medical products. These soft, non-stretch, thermoplastic polyurethane-coated nylon fabrics hold air, water, and gels and can be manufactured using RF welding as well as heat and sonic sealing technologies. Flame-retardant, fluid-proof, cleanable, stain-resistant, anti-bacterial, and anti-fungal fabrics, offered in blue, black, and maroon, come in various fabric deniers, including 70d, 210d, and 420d.

Interstate Specialty Products    Sutton, MA 01590
Feb 17, 2012 Utilizing automated digital dieless cutting machines, Prototype Die Cut Parts Service can supply parts with tolerances to ±0.005 in., depending upon material and size. Parts can be produced from 1 in.² up to 60 x 120 in. with virtually any geometry, including narrow cross sections and close hole spacing. Using non-metallic materials, service can produce filters, breather vents, frits, filtration support media, membrane supports, and gaskets.