Ethernet Direct    Newburyport, MA 01950
Oct 22, 2010 Featuring IP66-rated vandal-proof and weather-proof housing, Model EDS-781H supports H.264 codec and provides 1,280 x 960 resolution with built-in motion detection. Unit integrates built-in Class 3 Power over Ethernet, Micro SD/SDHC slot for local storage, and digital I/O connection that allows users to set up various devices for alarm trigger. Operating from -22 to 122°F, fixed dome camera provides up to 900 TV lines video output, 2-way audio, and adjustable viewing angle.

Dynamic Sealing Technologies, Inc.    Andover, MN 55304
Oct 22, 2010 Accommodating needs of plastic injection molding application, 14-passage fluid rotary union is optimized for water and high-pressure hydraulic oil service. Features include stainless and carbon steel design, load bearing capability, and electrical slip ring for data transfer. While applied shaft coating process that enhances seal performance and service life is standard, options include heavy-duty bearings and cross talk protection.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Oct 21, 2010 Available for wide range of common module cases, Liquid Coolers provide heat dissipation capacities up to 6,000 W. Units are fastened to heat sink by means of screws, and mounting surfaces are precisely milled. Threaded holes for fastening modules are provided according to customer's specification. In addition to standard heat sinks, modifications and customized versions are possible.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Oct 21, 2010 Operating with pressure differential of less than 0.19 bar, Model TF 251 provides capacity of 25 m³/min. Integrated Secotec cycling control comprises thermal mass that allows dryer's refrigerant compressor to operate at partial load for energy savings. Two operating hours counters, viewable through window in enclosure, enable user to directly track savings at any time. Available in air- and water-cooled models, unit includes condensate separation system to maintain compressed air quality.

MicroMo Electronics, Inc.    Clearwater, FL 33762 3008
Oct 21, 2010 Housed in 4.5 mm long package, Model HXM3-64 provides velocity, direction of rotation, and position feedback for 6 mm diameter Faulhaber dc motors. Encoder features Lexan housing and 25 mm long flexible cable that can attach to Molex 52745 series 8-conductor ZIF connector. Operating from -25 to +85°C at 4.5-5.5 Vdc, Model HXM3-64 offers 16, 32, and 64 line count resolutions with A, B, and Z channels. Resolution can be set by end user with no programming required.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Oct 21, 2010 Aquamat CF models 9/19/38/75 treat compressed air condensate in accordance with water resource legislation to achieve prescribed safety levels before the substance can be disposed of in wastewater system. Able to be used for mineral and synthetic oils as well for condensate from rotary screw and reciprocating compressors, separation systems are available for air deliveries of up to 45 m³/min and tested/certified by Berlin Civil Engineering Institute.

KNF Neuberger, Inc.    Trenton, NJ 08691-1810
Oct 21, 2010 Featuring up to 1.5 Lpm capacity, NMP miniature air and gas diaphragm pump generates up to 18 in. Hg vacuum or 13 psig pressure. It is available with 316 stainless or aluminum heads to provide threaded ports and, matched with EPDM or NBR elastomers, suits critical marine and aircraft applications. Choice of dc, ironless core, and long-life, low EMI/RFI brushless dc motors promote OEM design flexibility.

Tci Automotive    Ashland, MS 38603
Oct 21, 2010 Blanchard-ground A514 steel flexplates are .140 in. thick and are SFI 29.1 approved strength and durability in Ford Modular 4.6/5.4 L engines with 6- or 8-bolt crankshafts. Engineered to prevent cracking and ring gear breakage, products include GM torque converter pattern that gives option of using GM transmission with Ford engines. They include factory size bolt holes and are electro-coated for protection from damaging elements and vibrations.

Tci Automotive    Ashland, MS 38603
Oct 21, 2010 Flexplates for GM LSA and LS9 engine applications feature precision-ground, .190 in. thick, A36 steel plate material. Engineered to prevent cracking and ring gear breakage, products integrate early style GM torque converter pattern that gives option of using LS-series or earlier model transmission with GM LS9 or LSA engine. Units are dynamically balanced with converter bolt holes sized to ½ in. dia, and are electro-coated for protection from damaging vibrations and elements.

Emerson Network Power    St. Louis, MO 63136
Oct 21, 2010 Intended for residential and small business renewable energy market, Model SPV-5.0 is programmable to 3 output voltages from 208-240 Vac. Transformer-based unit has peak efficiency of 95.3% and MPPT efficiency greater than 99.5%. Featuring 2 independent multi-string photovoltaic inputs, inverter can measure and record real-time and historical energy data from connected PV array and wirelessly send information to Solar Monitor EEM1.0 with touch-screen color display, which can be located remotely.

Aremco Products, Inc.    Valley Cottage, NY 10989
Oct 21, 2010 Intended for electrical and electronic assembly applications to 360°F, Aremco-Bond(TM) 616 electrically and thermally conductive, 2-part adhesive is formulated using silver-coated glass spheres. It exhibits volume resistivity of less than 0.005 ohm-cm at room temperature and thermal conductivity of 0.4 W/m-°K. Mixed in 1:1 ratio by weight, adhesive has 1,000 psi tensile shear strength, 78 Shore D hardness, and 50,000-60,000 cP mixed viscosity range.

HaydonKerk Motion Solutions    Waterbury, CT 06705
Oct 21, 2010 Model SAA06 Motorized SplineRail(TM) utilizes precision rolled lead screw, supported by bearings and contained within concentric extruded aluminum spline, driving integrated composite polymer nut/bushing. KerKote® TFE coating and self-lubricating Kerkite® nut/bushing material lend to extended life expectancy. When mounted vertically, SplineRail can also be used to simultaneously lift and rotate (Z-theta motion). Actuator uses Haydon(TM) Size 17 single or double stack stepper motor.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Oct 21, 2010 Series TDT thermal dispersion flow transmitter, used for metering of all fluid media, has adjustable insertion mounting for pipe sizes of 1-24 in., while extensions allow use with up to 75 in. dia pipes. Unit contains PT resistor that measures media temperature, and one that is heated by attached heating resistor. Flow of media cools heated resistor proportional to speed of flow, resulting in linear output signal proportional to flow speed. Unit is available in flow ranges up to 0-12.47 fps.

E Instruments International LLC    Langhorne, PA 19047
Oct 21, 2010 Suited for field and laboratory use, 650 H/H2 provides site calibration for thermocouples, resistance thermometers, temperature transmitters, and thermostats. Portable unit, with 68 to 1,202°F range, readily accepts ¼ and ½ in. interchangeable inserts, with other sizes also available. Design facilitates operation with respective well depths of 120 and 200 mm for H and H2 models and well diameter of 25 mm. Calibration certification is included.

The Dryco Group    Northlake, IL 60164
Oct 21, 2010 Featuring 9 ft x 3 ft 8 in. x 8 ft 1 in. footprint, XDH2000 Series utilizes silica gel-impregnated desiccant technology and is suitable for mobile applications. Units require 60 A/480 V or 45 A/600 V of power to deliver 2,000 cfm at 2.5 in. static pressure. UL/CSA listed Class I, Div 2, deep-drying dehumidifiers deliver climate-controlled environment in potentially hazardous locations.

Hilscher North America Inc    Lisle, IL 60532
Oct 21, 2010 Using M12 connectors to interface with industrial automation networks, netBRICK comes in plastic housing and can operate as Slave or Master. Each supported protocol conversion is pre-programmed, facilitating I/O mapping, while electronic component selection ensure resistance to elevated thermal loads as well as sustained operation in areas with varying temperatures between -20 to +70°C. Product can be mounted inside/outside of any cabinet installation located indoors or outdoors.

Rockwell Automation    Milwaukee, WI 53204
Oct 21, 2010 Designed to meet global functional safety standards, such as EN ISO 13849-1, Allen-Bradley Guardmaster Series includes 7 units capable of supporting safety devices in single and multi-zone configurations. Users can expand and cascade safety functions up to SIL 3 rating using one single wire to connect devices. In addition, AND/OR logic can be set via rotary switch on front of relay, yielding variety of configurations including regional and global e-stop architectures.

Hawk Measurement    Middleton, MA 01949
Oct 21, 2010 Featuring non-contact, self-cleaning operation, Gladiator Acoustic Switches use acoustic wave technology in Sender/Receiver form for blocked chute detection, point level detection, and anti-collision for heavy machinery. Gladiator Amplifier powers 2 AW Transducers, which use software that enables both units to pulse and receive each other's acoustic echoes. When path between transducers is blocked, units immediately detect presence/absence change of return signal and trigger communications relay.

GaleWrap    Douglasville, GA 30134
Oct 21, 2010 Available as alternative for hand wrapping, GW-3500(TM) all-in-one pallet wrapper and jack produces consistently wrapped loads while eliminating wasted film. Features include manually adjustable film tension, up/down wrapping cycles, and independent top/bottom wrap pattern selection from 1-9 wraps. Splash-proof wrapping mode is also available, and secure wrapping eliminates load failures. Wrapping height is 71 in., and min/max pallet dimensions are 48 in. long x 32-40 in. wide.

Grayling Industries, Inc    Alpharetta, GA 30004
Oct 21, 2010 Offering environmentally friendly alternative to steel and plastic drums and bottle-in-cage totes, PaperIBC(TM) Container is completely recyclable and biodegradable. Unit passes ISTA testing and meets NMFTA requirements. Manufactured using high-pressure injection molding, Buckhorn(TM) Caliber 315 is made from FDA-approved materials and comes in capacity of 315 gal or 3,300 lb. Reusable IBC is collapsible and has smooth interior and exterior surfaces to facilitate cleaning.