Flambeau    Baraboo, WI 53913
Feb 24, 2012 Measuring 2.25" (5.71 cm) and 3.50" (8.89 cm), fuel caps allow for low permeation levels below baseline EPA standard. Caps are made of durable nylon and acetal polymers and have ratchet design with consistent torque. With internal tether, or external tether option, and PSI pressure seal with neck, caps are available as non-vented for CARB applications or optional 1-way vent for EPA applications. Custom colors and decoration available.

Allen Engineering Corporation    Paragould, AR 72451
Feb 24, 2012 Suited for concrete contractors, Models VP436 and VP446 are equipped with 36 in. and 46 in. rotors, respectively. Trowels provide height adjustable handles with either twist-action blade pitch control or lever-action positive pitch control. Driven by Honda engines, machines also feature cast iron spiders, pressure plates, and lift levers along with lifting bars.

MOUVEX    Auxerre   France
Feb 24, 2012 Featuring seal-free design to eliminate leaks and product contamination, Abaque Series handles anything from abrasive and aggressive fluids to shear-sensitive and viscous materials. Self-priming pumps can run in forward or reverse and offer suction-lift capabilities to 25.5 ft, as well as ability to run dry. Available in ductile iron and stainless steel construction, pumps come in 10 sizes with flow rates from .07-339 gpm and discharge pressure to 232 psi.

Manncorp    Willow Grove, PA 19090
Feb 24, 2012 Equipped with programmable top and bottom hot air as well as rapid on/off IR underheaters, lead-free BR750 has 8 set points that allow exact thermal conditions to be produced for profiles containing heating rate, target temperature, dwell time, and cooling. SMDs are automatically pre-aligned and picked up from component nest at exact centers after size is entered, and upward-looking camera verifies positioning. Split-vision optics and electronic zoom adjustment performs fine tuning.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Feb 24, 2012 Designed for intermediate hole-tolerance area of IT9-IT10, CoroDrill 870 can be tailored to optimize applications through diameter range, steps, and length possibilities. Secure interface between drill body and tip ensures precision, while quick tip change helps maximize active machining time. Drill is available in 0.472-0.826 in. diameter range and lengths 3x and 5x hole diameter as standard.

RNR Plastics, Inc.    Raynham, MA 02767
Feb 24, 2012 Opening from side for facilitated card access, Fleet Gas Card VisorWallet(TM) is heavy-duty, 30-gauge, clear vinyl holder with 1 in. wide, adjustable elastic strap. Holder can be concealed behind visor and helps improve resale value of fleet vehicles by eliminating permanent mounting brackets, screws, and glues that can damage fleet vehicles. Custom printing and color-coded strap options are available.

Steelnor Systems    Midland, ON L4R4K8
Feb 24, 2012 Compatible with filling and assembly lines, SUPS-30 packages products in stand up pouches with specific magazine system. Machine utilizes vacuum to pick and place pouch from magazine and present it for filling. Once filled, pouch is released into heat sealer for closing. Constructed of stainless steel and anodized aluminum, sealer operates to 28 ppm, comes with color touchscreen HMI, and features adjustable conveyor height and pouch magazines.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Feb 24, 2012 Available in basic, standard, and enhanced versions, TL46 Series utilizes wide-spectrum RGB LED to emit precision light spot. Units offer switching frequencies of 15, 20, or 30 kHz, as well as automatic, manual, and dynamic settings, depending on version. Providing NPN/PNP and analog output, sensors have standard fixing, M12 connector rotatable on 5 positions. Units are suited for automotive, beverage, and packaging industries.

Michelman Inc.    Cincinnati, OH 45236
Feb 24, 2012 Effective at thin coat weights of 0.04 dry gsm, Michem Flex P2300 produces adhesion between extruded resins, and paper and film substrates. Single component, optically clear formulation is water-based, contains no VOCs, and requires no curing. Typical users include converters of food packaging, medical packaging, health and beauty product packaging, and industrial laminating stock, as well as film producers and paper converters.

Saelig Co., Inc.    Pittsford, NY 14534
Feb 24, 2012 Measuring 3.3 x 1.75 in., Xminilab combines 8-bit arbitrary waveform generator, protocol sniffer, and mixed signal oscilloscope that provides simultaneous 2 MSPS sampling of 2 analog signals. Unit is based on Atmel's ATXMEGA32A4 MCU, with 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM. It can be mounted on breadboard or PCB for in-situ testing and verification. Graphic 2.4 in. 128 x 64 pixel OLED display indicates monitored signals with automatic measurements, adjustable persistence, cursors, and grids.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 24, 2012 For IR and visible light sources, TEFD4300 is clear epoxy device with sensitivity range of 350-1,120 nm. For light sources in IR wavelength from 770-1,070 nm, TEFD4300F is black epoxy device with daylight blocking filter matched with 850-950 nm IR emitters. Both silicon PIN photodiodes offer 17 µA reverse photo current and ±20° angle of half sensitivity. Other features include switching times down to 10 ns, 0.1%/K temperature coefficient of light current, and -40 to +100°C operating range.

Master Bond, Inc.    Hackensack, NJ 07601
Feb 24, 2012 Primarily used for testing adhesion or cohesive strength of flame sprayed coatings as per ASTM C633 specification, Master Bond EP15 features tensile strength exceeding 12,000 psi at room temperature and viscosity of 40,000-65,000 cps. Chemical-resistant product is serviceable from -60 to 250°F and withstands thermal cycling. Applied with brush, paint roller, or spatula, 100% reactive system cures in 60-90 minutes at 300-350°F with minimal shrinkage.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 24, 2012 Series DTFF, available in various ranges for all calibrations, allows accurate low-flow rate measurement of compatible gases, liquids, and oils. To ensure reliability, these compact fixed-orifice flowmeters feature construction of stainless steel. This helps withstand system pressure up to 3,000 psig without sacrificing accuracy of ±2% FS for liquid/gas calibration and ±5% FS for air calibration required for low flow rates.

Russell Finex    Pineville, NC 28134
Feb 24, 2012 To meet demands of food and pharmaceutical industries, Russell Hygiene Filter(TM) is designed in accordance with hygienic machinery standard BS EN ISO 14159:2008 and food contact regulation EU1935/2004. Crevice-free filter does not require any tools for cleaning or maintenance and dismantles completely by one operator. Featuring reusable, reduced crevice filter element, fully enclosed, self-cleaning product continuously removes oversize contamination as fine as 10 microns.

Larson Electronics, LLC    Kemp, TX 75143
Feb 24, 2012 With Model MGS-150KVA-480-10X100A, operators can tap into 480 V 3-phase power sources and step current down to 120/208Y output for powering variety of tools and equipment. Unit distributes 120 Vac single-phase through 4 GFI-protected receptacles and 208Y via ten 100 A ADR1044 outlets. Safe connection to 480 Vac is provided through 400 A fused ON/OFF main disconnect switch. Featuring 2 in. square steel cage, transformer has centrally located lifting eyelet and integral skid pockets for transport.

Larson Electronics, LLC    Kemp, TX 75143
Feb 24, 2012 Measuring 2 x 11 in., Model LEDP3W-9 utilizes CREE XLamp XR-E® LEDs to produce 2,056 lumens while consuming 27 W at 2.25 A when connected to 12 V electrical system. Emitter has IP68-rated waterproof housing constructed of extruded aluminum with unbreakable polycarbonate lens. Available in floodlight and spotlight configurations, Model LEDP3W-9 can produce light beam 575 ft long by 100 ft wide as spotlight, suitable for military and law enforcement applications.

Honeywell Sensing and Control    Golden Valley, MN 55422
Feb 24, 2012 Housed in IP67-sealed package with integral connector, RTY Series Rotary Position Sensors provide 12 million cycle product life and 8 operating ranges up to 360°, which are tolerant to over-travel. Low and high voltage versions cover input voltage range of 4.5-30 Vdc. Providing non-contact operation, sensors use magnetically biased, Hall-effect IC to sense rotary movement of actuator shaft over set operating range. Devices are protected against both reverse polarity and EMI.

Huron Technologies, Inc.    Leslie, MI 49251
Feb 24, 2012 Designed for OEM and aftermarket filters, Release Coating 7833 is formulated to give multiple release from aluminum molds in flexible integral skin applications. Product not only preserves bond between polyurethane seal and paper component of filter, but also provides aesthetic appearance. Slip and ease of release minimizes effort in manual demolding.

Electro Standards Laboratories    Cranston, RI 02921 3403
Feb 24, 2012 Measuring 19.0 x 1.75 x 8 in., rackmount Model 6296 is suited for inserting or removing devices that are linked together in chain or series. Local control is via front panel pushbutton, and front panel LEDs display switch position/power status. All fiber optic ports are LC Duplex, single mode, 9/125 micron, and support wavelength range of 1,310-1,610 nm. Employing MEMS-based mirror/prism switch technology, switch is powered by 120 Vac wall mount module that supplies 12 Vdc, 500 mA.

Iridium Communications Inc.    McLean, VA 22102
Feb 24, 2012 Engineered for durability to withstand harsh maritime conditions, Iridium Pilot is packaged in small, lightweight electronically-steerable, phased-array antenna, designed to maintain connectivity in rough seas. In addition to broadband connectivity, it offers 3 independent phone lines, all of which work simultaneously, with data speeds up to 134 kbps. Other capabilities include a built-in firewall for traffic management, and bulk configuration capability for managing large volumes of units.