Fluke Corp.    Everett, WA 98203
Jan 22, 2010 Fluke 8808A 5.5-digit Digital Multimeter and 8845A/8846A 6.5-digit multimeters include cable adapter which converts RS-232 serial port to USB, allowing connection of device to PC USB port. Units also include FlukeView Forms Basic software that allows users to document, store, and analyze individual readings or series of measurements, then convert them into professional documents. Program can be used alone to download measurement data and create reports that can be saved/printed.

Ophir-Spiricon Inc.    Logan, UT 84321
Jan 22, 2010 PE25BF-DIF has broadband absorber that measures from 193 nm to 2.2 µm at pulse rates to 150 Hz; pulse energies are measured up to 10 J. PE100BF-DIF measures from 193 nm to 2.0 µm at pulse rates to 40 Hz; pulse energies are measured to 40 J. Both use single, removable diffuser to cover UV, visible, and mid-IR wavelengths and work with most types of pulsed lasers. They provide data about pulse energy, average power, frequency, min/max values, missing pulses, time jitter, and standard deviation.

VIA Technologies, Inc.    Taipei 231  Taiwan
Jan 22, 2010 Based on Mobile-ITX form factor, VIA EPIA-T700 is designed for embedded devices in medical, military, and in-vehicle applications. This 6 x 6 cm computer-on-module, powered by miniaturized 1 GHz VIA Eden ULV processor and VIA VX820 media system processor, can be used with variety of carrier boards that can be adapted/customized. Able to withstand vibration up to 5G, product supports 512 MB DDR2 on-board system memory and integrates multi-configuration transmitter.

ELMOS Semiconductor AG    Dortmund   Germany
Jan 22, 2010 Enabling control of parameters via SPI interface, ASSP E910.87 EC motor driver is designed for automotive or industrial applications with voltages between 4-27 V. Gate driver IC for 6 NMOS FETs allows driver outputs to be controlled at up to 60 kHz. Integrated voltage regulator can power small microprocessors directly. Protective features include phase shortcut, gate shortcut, cross conduction, over/undervoltage protection, overtemperature warning, and more.

ELMOS Semiconductor AG    Dortmund   Germany
Jan 22, 2010 Supplied in SOIC20 package, E910.92 is intended for use in passive infrared (PIR) alarm systems/motion sensors. IC combines all required functions for single-chip PIR motion detector and provides relay and LED output for interfacing alarm system. Configuration options promote secure detection, and readout algorithm can be adapted to specific ambient conditions over broad range. Alarm signal can be issued with every impulse or after detection of several impulses.

Cotronics Corp.    Brooklyn, NY 11232
Jan 22, 2010 Designed to bond metals, ceramics, and dissimilar materials, Durabond(TM) Metallic Adhesives and Putties overcome brittle bonds obtained with ceramics and offer impact resistance associated with soldering and welding. Adhesives can be drilled, tapped, and machined, and do not contain epoxies or silicones. Inorganically bonded and chemically cured, VOC-free products are suitable for repairing and rebuilding cracked metal housings, exhaust manifolds, molds, dies, boilers, pipes, and fittings.

RCI Technologies    San Dimas, CA 91773
Jan 22, 2010 Fuel recirculating systems (FRS) may be fitted with Automatic Chemical Injection System, which provides safe way to add biocides and other chemical additives to stored fuel. Specifically, it injects chemicals directly into fuel stream prior to entering fuel tank. This new option is available on all RCI Fuel Recirculating System and may be retrofitted to existing units as well.

Goodfellow Corp.    Oakdale, PA 15071
Jan 22, 2010 Available as machinable rods and plates in range of sizes, as well as finished machined components, SHAPAL(TM)-M soft can be machined into complex shapes using carbide tools. Ceramic is valued in wide range of applications, particularly in vacuum and nuclear industries, where zero porosity, ability to seal under vacuum, and low thermal expansion are important. SHAPAL(TM)-M soft is also suited for heat sinks, electronically insulating components, and crucibles for vacuum deposition.

Ashcroft Inc.    Stratford, CT 06614
Jan 22, 2010 Equipped with 4-20 mA analog output, 4-digit LED display, and programmable switch contacts, GC35 provides remote signaling, local reading, and pressure control. Multifunctional instrument performs functions of transducer, digital indicator, and pressure switch. Supplied in nickel-plated cast aluminum housing, RoHS- and CE-compliant unit is offered in 0/50-0/7,500 psig ranges and compound ranges to 300 psi. Back- or bottom-located pressure connection is available.

Labconco Corp.    Kansas City, MO 64132 2696
Jan 22, 2010 Providing physical barrier to protect operator from hazardous airborne particulates and powders, Precise® HEPA-Filtered Glove Boxes feature one-piece molded, medium-density polyethylene shell with chemical-resistant work surface sealed to glove box floor. Main chamber interior is 13 ft³ and transfer chamber is 11.0 in ID x 12 in. In addition to inlet and outlet HEPA filters that are 99.99% efficient on 0.3 micron particulates, boxes have built-in blower capable of 13-100 cfm airflow.

Molded Fiber, a UFP Technologies Brand    Clinton, IA 52732
Jan 22, 2010 With access to 100% recycled fiber board material, Molded Fiber can create folding cartons, boxes, and sheets using high-speed die-cutters. Recycled fiber board can be manufactured for packaging solutions suitable for health and beauty products, apparel, and other retail and consumer goods. Material can also be embedded with flower seeds, so that packaging can either be placed in recycling bin, or planted directly in ground where it will biodegrade and seeds will grow into flowers.

Cooper Lighting    Peachtree City, GA 30269
Jan 22, 2010 Providing color quality of 85 CRI, Halo Stasis LED fixtures are available in Small (8 W) and Medium (18 W) sizes, with Spot (8°), Narrow Flood (25°) and Flood (40°) beam distributions, and 3,000 or 4,000 K color temperatures. Adjustable arm employs 15° graduations for precise tilt aiming, while indicator mark on arm bottom assures lamp housing alignment with track. Featuring die-cast aluminum construction in white, black, or aluminum haze finish, fixtures include integral on/off switch.

Cree, Inc.    Durham, NC 27703
Jan 22, 2010 Suited for military and ISM (industrial, scientific, and medical) applications, CMPA0060025F offers 25 W output power over bandwidth of 20 MHz to 6 GHz. Compact amplifier can operate with supply voltages up to 50 V and has power gain of 12 dB typical.

Kafko International Ltd.    Skokie, IL 60076
Jan 22, 2010 Available in 5 gal pail and 30 and 55 gal drums, ultra-concentrated Oil Eater low VOC truck wash removes grease, diesel, dirt, and bird droppings from trucks and heavy equipment. It is non-hazardous, completely biodegradable, and works in hard and soft water. Suited for use with automatic and high pressure self-service systems, high-foaming wash can be diluted up to 100:l, cleans carbon deposits, lubricates brushes, and is safe on proportioners.

Power Sources Unlimited, Inc.    Wrentham, MA 02093-2210
Jan 22, 2010 Measuring only 3.9 x 8 x 1.5 in., RoHS-complaint NXT-400 series offers 8.5 W/cu in. power density, with 85% efficiency (typical) and 0.5% line and load regulation. It operates at up to 70ºC with airflow and power factor corrected, has universal 90-264 Vac input, and is compliant to EN60101-1 (medical) and EN60950-1 (ITE) standards. Eight models are available, providing adjustable, single outputs from 2.5-48 Vdc. Options include remote inhibit/enable and isolated 5 Vdc standby power.

Torrey Pines Scientific, Inc.    Carlsbad, CA 92010
Jan 22, 2010 Operating from 12 Vdc, EchoTherm(TM) model CO20 offers range from room temperature to 90°C, regulated to ±0.1°C via PID temperature control software. It holds columns up to 30 cm long by ¼ or 3/8 in. dia in mounting clips and provides digital display of target and actual chamber temperatures. Features include injection counter, 30 day timer with alarm, and user settable auto-off. Unit comes with bench top universal power supply, 3-wire AC line cord, and counter cable.

Heyco Products    Toms River, NJ 08753
Jan 22, 2010 Available in multiple sizes for cable diameters ranging from 0.10-1.00 in., Electromagnetic Compatibility (EMC) Cordgrips handle temperatures from -40 to 212°F. They are made of nickel-plated brass with TPE gland, have long thread for use in standard or thick panels and provide 360° shield contact with sleeve due to braided shield which runs into gland. IP68 rated cordgrips are available in PG and metric thread with optional EMC locknuts that have cutting teeth to provide optimal shield contact.

PT Tech, Inc.    Sharon Center, OH 44274
Jan 22, 2010 Designed to operate in series with DC motors in crane applications, 12 in. Model CDB0812A caliper disc brake conforms to AIST dimensional standard. It is spring applied and electrically released, and has same mounting footprint as 8 in. drum brake. Upgrading crane with Model CDB0812A simplifies wear adjustment, eliminates drag and slip problems due to drum thermal expansion, and offers resistance to heat checking.

Partex Marking Systems    Birmingham   United Kingdom
Jan 22, 2010 Printed using hot-foil stamping system that is abrasion- and chemical-resistant, Pre-Printed Cable Ties can be marked with any legend, including company names and logos, as well as sequential numerical or alphanumeric sequences, to suit wide range of applications. They are available in black and natural Nylon 6.6 in lengths from 80-1,030 mm, and in red, blue, green, yellow, grey, and brown in lengths from 100-300 mm. Special ties, such as screw-mountable types, can also be pre-printed.

GE Co., GE Consumer Products    Louisville, KY 40225
Jan 22, 2010 Producing 1,200 W, SHOWBIZ® CSR1200 STAYBRIGHT® CSR1200/S/DE/60 and CSR1200/S/DE/72 provide greater than 85% beam lumen maintenance at 400 hours of operation in most major moving-lights fixtures. Double-ended, short-arc units can create daylight color temperatures for stage productions, concerts, or architectural lighting. With rated life of 750 hours, lamps come in 6,000 K with CRI of 85 and 7,200 K with 75+ CRI. They can be used on electronic or AC magnetic ballasts/igniters.