H-B Instrument Co.    Collegeville, PA 19426
Feb 29, 2012 Polycarbonate hydrometer series features shatterproof design, glass-like clarity, and easy-to-read scale. This line of hydrometers covers most popular ranges of specific gravity: brix, baume, sodium chloride, and salt brine. Each item is calibrated against NIST standards and includes statement of accuracy traceable to NIST.

Macro Sensors    Pennsauken, NJ 08110 1334
Feb 28, 2012 Available in 3 standard ranges of +0.020, +0.100, and +0.200 in., BB Series LVDT dimensional gaging probes combine AC-LVDT with linear ball bearing assembly to reduce radial play and core skewing, resulting in repeatability of 0.000006 in. Spring-loaded LVDTs feature rubber bellows covering probe shaft to prevent contaminants from entering into bearing. Probes are available in 4 models including full bridge, half bridge, pneumatic and soft touch.

EFJ, Inc.    Irving, TX 75038-2401
Feb 28, 2012 Compatible with Project 25 (P25) Phase 2, Viking(TM) VP600 addresses needs of police, fire, EMS, and other critical users. Audio and visual features, such as top display with backlighting, 1 W speaker, and AMBE+2 vocoder to eliminate background noise, facilitate communication efforts, even in hazardous environments. Other features include interoperability with P25 trunked and conventional modes, APCO 16 Motorola SMARTNET®/SmartZone®, and upgrade capability for P25 Phase 2 TDMA.

K&H Industries, Inc.    Hamburg, NY 14075
Feb 28, 2012 HazLoc Lantern features 340° rotating head with 70° pivoting angle that allows operators to position light either horizontally or vertically and angle light beam directly at worksite. Hand-held safety lantern features induction charging with no charge contacts, no exposed metal, buoyant material construction, and 10 hour run time. Designed for maintenance and repair professionals, lens is surrounded by molded rubber bumper to absorb shock.

Weidmuller, Inc.    Richmond, VA 23236
Feb 28, 2012 Approved for Zone 2 hazardous areas, Model ESX10-TC uses active current limitation and ensures selective disconnection of 12 Vdc load systems in factory and process control applications. DIN rail-mount device, measuring 12.5 mm wide, includes remote reset or on/off control, cross-connection busbars, and integral multi-color LED status indicator. Typical process applications include remote, unmanned equipment where lightning or other transient surges trip protection equipment.

Tru-Cut Saw, Inc.    Brunswick, OH 44212
Feb 28, 2012 Offered with variety of blade options to meet specific application requirements, Model TC16DC features 2-speed, 3 hp motor, 45° left and right miter cutting, self-centering vise, laser cutting guide, and chip tray. Dry cut metal saw, suited for sample cutting, industrial applications, and fabrication shops, supports 12, 14, and 16 in. dry cut saw blades with TiN, TiCN, and AlTin coatings.

ON Semiconductor, LLC    Phoenix, AZ 85008
Feb 28, 2012 Housed in SOIC-8 package, Models NCV47700 and NCV47701 feature output diagnostic pin CSO that can be used to detect open and shorted loads. By connecting resistor to CSO, devices can provide adjustable output current from 10-350 A with ±10% accuracy. Adjustable output voltage versions are available, covering 5-20 V range, with ±6% accuracy for NCV47700 and ±3% accuracy for NCV47701. ICs also include reverse input voltage protection, as well as overcurrent and overtemperature protection.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Feb 28, 2012 With technology that allows detection of fluorescent marks on any object separately from its color, material, and distance inside operating range, LD46 series addresses needs of applications in pharmaceutical, woodworking, automatic packaging, and mechanical industries. Sensors avoid interferences or reflections from non-luminescent surfaces such as mirrors, glass, and shiny metal surfaces and feature bar-graph indicator, IP67 mechanical protection, and switching frequency up to 2 kHz.

McPherson, Inc.    Chelmsford, MA 01824
Feb 28, 2012 With direct optical measurement capability from 1-300 nm, Model 248/310 grazing incidence spectrometer lets users test soft x-ray (XUV) high energy light sources and samples. Continuous spectral scanning allows measurement of lifetime, persistence, or decay. Programming and presetting of scan ranges is possible, and investigation of spectral events in any wide/narrow range segment is programmable. Up scanning feature combines digital drive and spectrometer system accessories.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Feb 28, 2012 Available in SWSI, Arrangement 10, Class I construction, FCU Utility Fans have forward curved impeller and are designed for low- to medium-pressure applications. Precision balanced air-moving devices, with welded steel construction, come in 11 sizes from 8-24 in. and capacities from 237-20,056 cfm. Along with TEFC industrial duty motor, features include adjustable V-belt drive, forward curved belt drive blowers, and self-aligning pillow block bearings.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Feb 28, 2012 Housed in 3.95 x 3.95 x 0.75 mm surface-mount package with I²C interface, Model VCNL4010 combines IR emitter and photo-pin-diode for proximity, ambient light detector, signal processing IC, and 16-bit ADC. Interrupt function enables sensor to work independently until predefined proximity or ambient light event occurs, and then it wakes up microcontroller, minimizing power consumption. With programmable LED drive current from 10-200 mA, sensor achieves object detection up to 200 mm.

ACS Valves    Caledonia   Canada
Feb 28, 2012 Available in 6-16 in. sizes, ACS Rotary Airlock Valves feature pressure differentials up to 15 psig and temperature tolerance up to 500ºF. ACS RotorRail(TM) enables tool-less access to rotor and all internal surfaces of housing without disassembly of rotor, or removal of upstream or downstream equipment from service. It also ensures accurate rotor re-alignment during re-assembly. Rotor configurations include closed-end, metering, shallow-pocket, Teflon®-coated, and adjustable-tip.

Munson Machinery Co., Inc.    Utica, NY 13503
Feb 28, 2012 Providing 10 ft³ capacity, Model VB-10-316S features smooth internal surfaces that are free of baffles, shafts, and bearings, allowing unobstructed material flow, as well as complete discharge through gate valve. Absence of residual material, together with access to internal surfaces, allows sanitizing to prevent cross-contamination. Intended for dry and granular materials, blender achieves uniform blends in 5-15 min with equal efficiency at fill volumes from 100% to 25% of rated capacity.

Enterasys Networks, Inc.    Andover, MA 01810
Feb 28, 2012 OneFabric Edge Starter Bundles includes Edge Switches, in stackable or modular versions, and 3600 series 802.11n access points to optimize distribution of processing load between APs and wireless controllers while remaining easy to manage. WLAN controller provides integrated application services and OneFabric control center management software provides set of unified wired/wireless management and security capabilities.

LitePoint Corporation    Sunnyvale, CA 94085
Feb 28, 2012 Supporting 802.11ac, LitePoint IQxel(TM) tests 802.11 a/b/g/n/p/ac and Bluetooth 1.0, 2.1, 3.0 and 4.0 devices. Product offers Wi-Fi for HD-quality video streaming and data synch in single-box test solution. Single chassis design provides fully calibrated RF measurements to DUT connection point. Solution tests 80 MHz and 160 MHz SISO and MIMO devices, delivering EVM measurement capabilities required for 256 QAM modulation.

Aftersoft Network N.A    Allentown, PA 18104
Feb 28, 2012 Available for VAST Enterprise management system, VAST Enterprise-Retread handles order management, production control, and quality assurance, as well as sales and distribution management. Program controls and documents production of retreaded commercial vehicle tires, in both pre-cure and mold-cure processes, from moment casings arrive to delivery of finished tire. Based on memorized process data, software enables optimization of processes within retread plant.

VARONIS SYSTEMS    New York, NY 10001
Feb 28, 2012 Pairing Varonis DatAdvantage, DataPrivilege, and IDU Classification Framework with HP IBRIX X9000 Storage Systems, Varonis® solution enables comprehensive visibility into user and group information from directory services, detailed data usage audit trails, and actionable intelligence about where sensitive data resides. Program also enables safe removal of excessive permissions, and data owner identification within scale-out NAS infrastructure to support explosive data growth.

Webroot Software Inc.    Boulder, CO 80308
Feb 28, 2012 Managed through web-based console, Webroot® SecureAnywhere(TM) Business - Endpoint Protection provides malware and advanced persistent threat detection; identity and privacy protection; firewall; and system cleanup. Program analyzes every file that tries to run on computer in cloud, eliminating security updates or signature database downloads. In addition to offline protection, solution proactively monitors any change made to endpoint by malicious file and rolls system back to safe state.

Akamai Technologies    Cambridge, MA 02142
Feb 28, 2012 Based on Akamai Intelligent Platform(TM), Akamai Kona Site Defender protects enterprise's critical online business functions. Program provides visibility into security events in real-time as well as ability to drill down into attack alerts to retrieve detailed information. Archived log data is available for 90 days to aid in forensic review. By monitoring rate of requests coming from IP addresses and gathering statistics about each, customers can block any IP address that is behaving in abusive way.

Altair Engineering, Inc.    Troy, MI 48084
Feb 28, 2012 AcuSolve V1.8b analyzes complex designs driven by multiphysics and multidisciplinary simulations. Post-processor manages complex CFD data with AcuFieldView, providing eight-way parallel operation with no model size limits. Three new turbulence models include: SST, SST-DES, and K-omega. Pre-Processing offers edge-based surface mesh extrusions through AcuConsole GUI. Users can mesh anisotropic features while retaining automatic unstructured meshing on complex geometries.