NEC Electronics    Santa Clara, CA 95050
Feb 02, 2010 Housed in 56-pin, 8 x 8 mm QFN package, All Flash(TM) Microcontrollers combine ultra-low-power 78K0R/Kx3-L 16-bit CPU and IEEE802.15.4-compliant 2.4 GHz RF transceiver for ZigBee® RF4CE. Current consumption is 18 mA during reception and 19 mA during transmission. Available with 64, 96, or 128 KB flash memory, MCUs with internal voltage booster, are capable of writing and erasing data in Flash down to 1.8 V. Applications include DTVs, set-top boxes, and Blu-ray(TM) disc devices.

Andor Technology Ltd.    South Windsor, CT 06074
Feb 02, 2010 Based around 512 x 512 back-illuminated electron multiplying CCD sensor, iXonEM Blue EMCCD Camera offers optimized QE performance from 300-470 nm. Unit features max readout rate of 10 MHz, frame rate of 35 fps, and -100°C thermoelectric cooling to eliminate dark current detection limit. With minimal spurious background noise, camera delivers single photon sensitivity and includes RealGain(TM) calibration of EM gain control.

NEC Electronics    Santa Clara, CA 95050
Feb 02, 2010 Intended for low-end automotive motor and lighting control applications, All Flash(TM) products include three 16-pin MCUs (78K0/FY2-L), three 20-pin MCUs (78K0/FA2-L), and two 30-pin MCUs (78K0/FB2-L). Each features internal 4 MHz oscillator system, LIN interface, and up to 16 KB flash as well as range of peripheral functions, including comparators and full/half-bridge control timers. While standby power consumption is 0.65 µA, active power consumption is 220 µA/MHz.

NEC Electronics    Santa Clara, CA 95050
Feb 02, 2010 All Flash(TM) LCD MCUs integrate metrology engine that consists of 24-bit delta-sigma ADC, power calculation hardware, power quality-management circuits, and anti-tampering circuits. Providing energy measurement and management functions for smart electricity meters, 64-pin 78K0/LE3-M and 100-pin 78K0/LG3-M come in 10 x 10 mm and 14 x 14 mm LQFPs, respectively, and are designed for single-phase, 2- and 3-wire electricity meters. Both offer set of integrated analog and digital peripherals.

Transducers USA    Elk Grove Village, IL 60007
Feb 02, 2010 Featuring operating range of 8-16 Vdc at 25 mA maximum, TRIP-80 series piezo alarms produce sound pressure level of 97 dBA and frequency of 2,700 ±500 Hz. Units measure 26 mm in diameter and are 22 mm tall. Available in PC pin or wire termination configurations, they are suited for industrial control, automation, and various alarm applications.

Transducers USA    Elk Grove Village, IL 60007
Feb 02, 2010 Measuring 43 mm OD with overall height of 33 mm, TRIP-4353-3 produces sound frequency of 2,900 ±500 Hz at sound pressure level of 90 dB. Unit offers continuous, fast-pulse, or slow pulse tone, making it suitable for indicating different conditions. Operating from 6-28 Vdc, TRIP-4353-3 works in noisy environments such as equipment and repair shops, industrial and machine control areas, transportation environments, material handling, and medical equipment situations.

IXYS Corp.    Santa Clara, CA 95054 2704
Feb 02, 2010 Aluminium Nitride cooler, featuring 133 mm dia, is suitable for press-pack devices with electrode contacts up to 125 mm dia. Unit incorporates geometric water channel design to ensure low values of thermal resistance even at moderate coolant flows. Typical cooler to input water thermal resistance for flow rate of 10 L/min are 5.2 K/kW, with 2 coolers and 1 semiconductor, and 6.1 K/kW with 3 coolers and 2 semiconductors. Isolation voltage between water and device is 10 kV.

Pierce Arrow, Inc.    Henrietta, TX 76365
Feb 02, 2010 Self recovery winches include compact solenoid assembly mounted above motor for efficient operation as well as for access to internal parts. With heavy-duty motors that offer high ampere resistance and output strength, winches are suitable for heavy-duty machinery requirements in off-road industry.

Toshiba Teli America, Inc.    Irvine, CA 92618
Feb 01, 2010 Model CSDS60CM3 incorporates 1/3 in. CMOS progressive scan color sensor with selectable resolutions of 1,280 x 1,024 or 1,280 x 720 at maximum frame rate of 60 fps. Backside illumination technology boosts light sensitivity and absorption, yielding fine image pixels. Measuring 44 x 29 x 78 mm, unit has DVI-D interface which allows it to synchronize with SD card recorders and DVI-D input monitors. Device's line generator function lets users operate 2 lines each, horizontal and vertical.

Kingston Technology Co., Inc.    Fountain Valley, CA 92708
Feb 01, 2010 Offered in 64-512 GB capacities, shock-resistant SSDNow V+ leverages Windows® 7 TRIM support to help maintain optimal write speed (180 MBps) throughout lifespan. Read speed reaches 230 MBps, and SSD uses MLC NAND Flash memory components. Featuring 2.5 in. form factor, 69.85 x 100 x 9.5 mm drive supports Self-Monitoring, Analysis and Reporting Technology (SMART) and comes with SATA 1.5/3.0 Gbps interface. Power consumption is 2.6 W while active and 0.15 W when idle.

Chassis Plans Inc.    San Diego, CA 92123
Feb 01, 2010 Featuring .090 in. 5052-H32 aluminum chassis and .250 in. milled solid aluminum front panel, M2U-20A COTS Plus Computer is suited for rugged military and industrial applications. Unit accommodates ATX motherboard and includes 3 I/O card slots, four 2 ½ in. removable drive bays with shock mounts, slim line DVD and floppy with 2 front panel USB ports, and three 80 x 38 mm cooling fans. Single or dual redundant power supplies are available with options for AC, DC, and Mil-Std 704/1275.

B & K Precision Corp.    Yorba Linda, CA 92887
Feb 01, 2010 Providing up to 1,440 W of power in 1U, full-rack case, XLN Series is suitable for rack mounting in ATE environment or for bench top use. Series contains 4 base models with various output voltages and current selections. Processing times below 50 msec facilitate integration into test systems, and front to rear airflow circumvents interference with other mounted devices. Featuring USB and RS485 interfaces with SCPI protocol, units are optionally available with GPIB/LAN interfaces.

Linear Technology Corp.    Milpitas, CA 95035
Feb 01, 2010 Operating from up to 38 V supply, synchronous Model LTC4449 drives upper and lower N-channel MOSFET gates over range of 4-6.5 V. Unit can sink up to 4.5 A and source up to 3.2 A. Adaptive shoot-through protection prevents upper and lower MOSFETs from conducting simultaneously while minimizing dead time. Housed in 2 x 3 mm DFN-8 package, IC features 3-state PWM input for power stage control and shutdown and is available in industrial-grade version that operates from -40 to 125°C.

Kontron    Poway, CA 92064
Feb 01, 2010 Measuring 95 x 95 mm, microETXexpress®-XL has shock- and vibration-resistant design with soldered processor, chipset, and RAM. It consumes 5-8 W and enables passive cooling without fan. Based on Intel® Atom(TM) processor Z520PT, COM Express(TM) Type 2 module includes 2 GB of DDR2 memory as well as GbE, Serial ATA, PATA, and 8 USB 2.0 ports, and 2 PCI-Express x1 lanes and PCI. It also has SDVO port for DVI, SDTV, and HDTV and 24-bit single-channel LVDS to support various displays/monitors.

NKK Switches    Scottsdale, AZ 85260-3420
Feb 01, 2010 Configurable with top or side actuation in single and double poles and 2 and 3 throw options, SS Series offers dimensions suited for designs requiring high-density PCB or SMT mounting. They offer .100 x .100 in. or 2.0 x 2.0 mm spacing for standard PCB grid and are designed for logic level applications. In addition to STC (Sliding Twin Crossbar) contact mechanism, features include insert-molded terminals and self-cleaning contacts. SMT models are made with heat resistant resin.

Locking Systems International, Inc.    Orlando, FL 32810
Feb 01, 2010 FLEX(TM) Padlocks include model TF8500 with 1 in. hardened steel shackle and TF8520, which has 2 in. hardened steel shackle. Both products allow user to change security of padlock by replacing cylinder with standard 7/8 in. cam lock cylinder from manufacturers such as Abloy, Medeco or Cobra. Manufactured of solid steel and hardened for maximum strength and security, shackles are interchangeable and can be changed by end user.

Metallized Carbon Corp.    Ossining, NY 10562
Feb 01, 2010 Allowing bearing cartridge to slid over end of shaft, Metcar 100 Series bearing assemblies are designed to enable fast bearing cartridge replacement from axial direction, while Metcar 300 Series bearing assemblies are designed to enable fast bearing cartridge replacement from radial direction. Available with several options for mounting to dryer support frame, both self-aligning bearing assemblies are available with 4 different choices of self-lubricating carbon-graphite material.

HD Electric Co.    Waukegan, IL 60085
Feb 01, 2010 Designed to read voltage on conductor from 0.1-500 kV line-to-ground, direct contact DVI-500 displays voltage on large 3-digit ultra-bright LED display. Compact unit provides audible indication when voltage is detected, allowing user to distinguish between nominal and induced voltages. Display is easy to read on end of long hotstick and can be used on overhead lines or in underground applications.

Control Co.    Houston, TX 77258 8307
Feb 01, 2010 Facilitating unattended filling of any container, Liquid Alarm detects when containers are close to overfilling, and sounds high-decibel alarm and flashes red LED light until liquid no longer touches sensor. It can also be placed on floor to detect spills and can be used with aqueous solutions and liquids that don't attack plastic. Measuring 1 13/16 x 3 x ¾ in. and weighing 2½ oz, battery operated unit can alarm constantly for 30 hr and comes with 10 ft long cable and 9 V battery.

Keterex Inc.    Austin, TX 78731
Feb 01, 2010 Rated for full speed (12 Mbit/sec) operation, USB-150 electrically isolates USB peripheral from its USB host while providing full, transparent USB connectivity. Device breaks ground loops and protects host PC from electrical damage where USB host and peripheral device may operate at different ground potentials, or where supply noise from host must be eliminated. Isolated 5 V supply delivers up to 400 mA to peripheral over standard USB cable, enabling isolation of hub-powered devices.