Technology Container Corp.    Shrewsbury, MA 01545
Nov 23, 2010 Packaways(TM) Corrugated Plastic Storage Boxes feature self-locking bottom and top design and do not require tape or glue. Units store flat when not in use and are available in 14, 16, 18, and 21 gal sizes and collapsible postal tote. Also resistant to moisture and humidity, boxes are suited for college dorm rooms and summer camp, as well as for seasonal storage of clothing, tools, and equipment.

Pregis Corp.    Deerfield, IL 60015
Nov 23, 2010 Made from kraft paper (linerboard) and water-based adhesives, NaturePlank(TM) offers brand owners and fabricators paper-based protective packaging alternative. Strength and blocking/bracing properties suit range of applications and provide all-natural alternative to petroleum-based plastic plank products. Made with SFI®-certified, renewable virgin and post-consumer recycled fibers, planks measure 108 x 48 x 1 or 2 in. and can be converted into desired shape for application.

Allegro MicroSystems Inc.    Worcester, MA 01615
Nov 23, 2010 Employing small-footprint SOP package, SX68000M Series features 85-230 Vac input range and 1.5-2.5 A output current, providing IPM solution for controlling motor inverters used to drive small-size motors in residential and commercial appliances. ICs consist of all power elements needed to configure main circuit of inverter, including 6 MOSFETs and 2 pre-drive ICs.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Nov 23, 2010 Designed to accommodate diverse battery-powered applications, AS1310 hysteretic boost DC-DC converter is optimized for light loads (60 mA) and offers efficiencies up to 92%. It operates from 0.7-3.6 V battery supply and provides output voltages from 1.8-3.3 V. Even at loads as light as 100 µA, efficiency reaches 85%. Features include shutdown mode that draws less than 100 nA, adjustable low battery detection, and feed-through mode that initiates if input voltage exceeds output voltage.

Deposition Sciences, Inc.    Santa Rosa, CA 95403
Nov 23, 2010 Infrared Narrow Bandpass (IR NBP) Filters for industrial, medical, and biological sciences instrumentation offer spectral range that lets user detect and identify concentrations of gases such as CO2, CH4, and HOx. Units allow discretization of spectra through gas sample at multiple detection wavelengths, inside and/or outside absorption band being measured. Calibrated for center wavelength placement to offset temperature shifts, filters also offer repeatable transmittance.

Kason Corporation    Millburn, NJ 07041
Nov 23, 2010 Flo-Thru Sanitary Sifter model K40-1FT-SS employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls of unit, reducing overall height. Intended for filtering oversize particles as fine as 38 microns from dry bulk materials or solids-laden slurries, screener is offered in diameters from 18-84 in. Sifter has quick-release clamps that ease removal of screens and disassembly of frames, and oversize material exits through side discharge spout.

GAO Instruments Inc.,    Toronto   Canada
Nov 23, 2010 Compatible with USB 2.0, Model A0130003 displays waveform average statistics, persistence, intensity, subtraction, and multiplication. Waveforms can be saved to text, MS Word or Excel, or graphic files. Featuring 40 MHz bandwidth, oscilloscope has max sample rate of 250 MSps and offers 3 triggering modes, including auto, normal, and single. Device is suited for testing and maintenance of lines, electronic equipment, and laboratory work.

J-Works,Inc    Ganada Hills, CA 91344
Nov 23, 2010 Providing USB control of frequency generation to 10 MHz with resolution of 0.28 Hz, JSB611 series USB 2.0 Direct Digital Synthesizer Modules have sine wave output amplitude of 500 mV peak-to-peak with signal-to-noise ratio of 60 dB. Total harmonic distortion is -66 dBc with spurious free dynamic range of -60 dBc, while triangle wave output amplitude is 500 mV peak-to-peak. Modules also include software interface with Windows driver and DLL or Class Library API.

InnovASIC, Inc.    Albuquerque, NM 87107
Nov 23, 2010 Serving EtherNet/IP adapters and Profinet devices, 1-Port RapID(TM) Platform supports EtherNet/IP November 2010 release and Profinet v2.2. It is fully functional and pre-tested for EtherNet/IP and Profinet conformance, including electronic schematics, BOM, and layout files as well as all necessary software, stacks, and development environment. Ethernet physical layer includes protection circuitry, bicolor LEDs, and magnetics integrated in connector, and cycle times down to 1 ms are achieved.

ARPAC    Schiller Park, IL 60176
Nov 23, 2010 ELECTRO-WRAP SERIES® automatic rotary tower stretch wrapper requires no pneumatic hookup and can be loaded with fork truck or pallet jack. Activated with remote lanyard, it features film carriage that revolves around stationary pallet load and, once cycle is completed, system automatically clamps, cuts, and wipes film to pallet. Sensor stops rotating film carriage arm for safety, while swing arm drive system has slewing bearing design that requires minimal maintenance.

Parker Fluid Control Division    New Britain, CT 06051
Nov 23, 2010 Designed for compressed natural gas fuel dispensing systems with single- and multi-tank applications, CNG Natural Gas Valve has integrated filter that removes impurities from gas as well as any particulates downstream of valve. Two-way, normally closed valve can withstand pressures from 0-4,500 psig, and for safety, is designed with bubble-tight leakage at 0 psig. Built with stainless steel body, valve runs on 12 Vdc with current draw of 1.64 A and max ambient temperature of 170°F.

Horiba Instruments, Inc.    Irvine, CA 92614
Nov 23, 2010 Available for ABX Pentra 400 clinical chemistry analyzer and ABX Pentra 80 hematology analyzer, Pentra SAfe provides remote Point-of-Care managers with secure access to all software on analyzers. CPA-compliant program requires username and password to access analyzers' operating systems and can provide full audit trail of all personnel who have processed samples. With software, managers can also monitor performance of users, patient results, and reagent levels in real time.

Newport Corp.    Irvine, CA 92606
Nov 23, 2010 CONEX-AG-LS25-27P integrates CONEX-AGP controller with Agilis(TM) AG-LS25-27P linear stage that includes miniature direct-read linear encoder. Controller delivers bi-directional repeatability of 0.3 µm, suitable for confined spaces requiring single-axis control, and linear stage is capable of 27 mm travel. CONEX GUI is accessible via USB, which also supplies power to controller, eliminating need for power supplies and/or cables.

Michael Smith Engineers Ltd    Surrey   United Kingdom
Nov 23, 2010 Delivering virtually pulseless flows, Zenith External Gear Pumps cover capacities from 0.05-750 cm³/revolution with maximum differential pressures from 70 bar for B-9000 Series to 275 bar for HPB Series. Typical applications include pumping abrasive fluids, corrosive and poor lubricating fluids occurring in polymer applications, hot melt glue dispensing, spraying paints and coatings, or wherever high viscosity fluids need to be transferred.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Nov 23, 2010 Weighing 6.7 lb with 10 in. head length, 18 V Model IWTH180-01 features ½ in. friction ring for socket changes, while Model HTH181-01 has ½ in. detent-pin for positive accessory retention, and Model HTH182-01 includes 7/16 in. Quick Change for tool-less accessory removal. All-metal gear train drives each motor at 1,900 rpm with 2,100 imp for full range of fastening applications. For optimal visibility, wrenches are equipped with LED flashlight function that activates when trigger is depressed.

STMicroelectronics    Lexington, MA 02421
Nov 23, 2010 Digital SPIN (dSPIN(TM)) monolithic motor-control IC combines digital control, analog measurement, and power electronic circuitry for controlling stepper motors using ST's BCD fabrication process. Voltage-mode control algorithm smoothes motor movement and feeds motor phases with accurate sinusoidal waveform, resulting in position resolution of 128 microsteps/step. Over-temperature, low bus voltage, and non-dissipative over-current protection and motor stall detection are included.

ILSCO    Cincinnati, OH 45227 1426
Nov 23, 2010 Made from high grade copper, SureCrimp® Narrow Tang Connectors provide conductive, low-heat connection. Seamless copper tubing optimizes connector endurance, while electro-tin plating offers protection against corrosion. RoHS-compliant, UL Listed, and CSA Certified for AWG and Flex Wire, all SureCrimp connectors are die stamped with wire size and die index number as well as part number identifier.

Hoffman    Anoka, MN 55303 1778
Nov 23, 2010 Consisting of aisle doors, ceiling panels, and chimney stacks, PROLINE® Containment System segregates intake and exhaust air. It can be used for hot or cold air containment, preventing hot and cold air from mixing. Available for use on raised or non-raised floors in small to large data centers, system accommodates 36 and 48 in. aisle ways. Ergonomically positioned interior/exterior grab handles, safety glass, and interior lighting promote network equipment accessibility and visibility.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Nov 23, 2010 Available in 18-60 in. dia, aerodynamically efficient UBV Upblast Roof Ventilator supports airflow to 61,000 cfm. It is constructed with heavy-duty welded steel base, galvanized butterfly exhaust damper section, and spark-resistant, cast aluminum airfoil axial impeller. Featuring TEFC industrial-duty motor located outside air stream, belt-driven unit has weatherproof closure for vertical air discharge and suits general ventilation applications or exhausting of heat or smoke fumes.

Creative Materials Inc.    Ayer, MA 01432
Nov 23, 2010 Available as 2-component system, 125-26A/B119-44 adheres to variety of substrates, including ITO-coated surfaces and other low surface-energy substrates. Electrically conductive product is resistant to scratching and creasing and is capable of screen printing circuits with fine-line widths and spaces as small as 50-75 microns. With minimal sensitivity to handling, abrasion, and solvents, RoHS-compliant ink is suited for touch screens, solar cell circuits, and RFID applications.