GAO RFID, Inc.    Scarborough, ON M1B2K4
Feb 17, 2010 Suited for applications where unobtrusive deployments with minimal cabling, readers, and antennae are required, model 236013 operates over 902-928 MHz range for American standards and 865.6-867.6 MHz for European standards. EPC Gen 2 RFID solution comes standard with integrated memory as well as various management, security, and connectivity options. Read and write levels are configurable from 5-30 dBm, max read distance is 30 ft, and max read rate is 190 tags/s.

Daimer Industries Inc    Woburn, MA 01801
Feb 17, 2010 Featuring Super-HOT(TM) Super High-Temperature Optimized Technology(TM), Super Max(TM) 15700SP systems produce wet-steam that can reach 330°F and are capable of converting cold water to steam in 30 seconds. Stationary units accept variety of heating fuels, including heating oil, natural gas, and propane, as well as diesel and kerosene. Powered by 230 V, 5 hp electric motor, power washers produce pressures to 1,500 psi with flow rates up to 5 gpm.

GAO RFID, Inc.    Scarborough, ON M1B2K4
Feb 17, 2010 Measuring 120 x 86 x 42 mm, model 233007 is designed for desktop, operates at reading frequency of 13.56 MHz, and has effective read distance of up to 80 mm. Compact and portable unit, which accurately collects tag data at baud rate of 19,200 bps, is configured with USB interface for data exchange and verifies ID code for system operator identification. Compliant with ISO15693 standard, reader accepts RFID cards and reads ISO-compliant smart labels.

Signatec    Newport Beach, CA 92660
Feb 17, 2010 Featuring 2 GB on-board memory configured as large FIFO and PCIe x8 bus, PX1500-4 A/D Board captures 4 synchronized channels at sampling rates up to 1.5 GHz, or 2 synchronized channels up to 3 GHz when interleaving ADC data. Board can continuously sustain long recordings at up to 1.4 GB/s through PCIe x8 bus to PC disk storage without break in analog record. Frequency synthesized clock allows ADC sampling rate to be set to virtually any value from 200-1,500 MHz.

Signatec    Newport Beach, CA 92660
Feb 17, 2010 Equipped with 2 Virtex-5 FPGAs, PX14400 A/D Board captures signal frequencies up to 200 MHz when using programmable gain amplifier in 1 dB steps, or up to 400 MHz if direct transformer coupled connection is employed. One GB on-board memory configured as large FIFO and PCIe x8 bus ensures board can continuously sustain recordings at over 1.2 GB/sec through PCI x8 bus to PC disk storage without break in analog record. Frequency synthesized clock allows ADC sampling rate to be set from 58-400 MHz.

Signatec    Newport Beach, CA 92660
Feb 17, 2010 Intended for commercial laptop computers, EC14150 wideband signal acquisition card offers 150 MHz sampling rate on 2 channels, 14-bit resolution, and 512 MB onboard RAM. This 54 mm-compliant ExpressCard board consumes 4.5 W, suiting mobile DAQ applications, and supports cntinuous record and data transfer modes. Capable of sustaining 180 MBps transfers over ExpressCard PCIe x1 data link bus interface, digitizer supports various triggering modes and covers 200 kHz to 200 MHz bandwidth range.

Ogura Industrial Corp.    Somerset, NJ 08873
Feb 17, 2010 Measuring 7 x 5 x 6 in., EMB-300CP employs series of springs that apply force to friction disc and are released when voltage/current is applied. Brake can produce 710 lb axial force and is made to operate with disc thickness of 12.5 mm. Requiring 2-wire hook up, product has normal operating voltage of 45 V but supports excitation to 90 V for accelerated response. For increased torque, modular design enables multiple brakes to be added to single disc.

Atlas Material Testing Technology LLC    Chicago, IL 60613 1831
Feb 17, 2010 Used for accelerated exposure testing of textiles, Xenotest® 220+ utilizes air-cooled xenon light source with rotating rack. Other features include intuitive control system, featuring European and Asian languages, and easy-insertion sample holders. Also provided, Atlas XenoTouch software offers remote control, E-Mail Service, and Online Monitoring add-ons. Uses include lightfastness testing under standard conditions and applications such as ISO 105 B02 and AATCC TM16.

Master Chemical Corporation    Perrysburg, OH 43552
Feb 17, 2010 Optimized for high-tech ferrous metals including stainless steel and Inconel®, TRIM® C380 targets aerospace, medical, and electronics industries. Combination of synthetic ester technology and non-halogenated EP package produces high levels of lubricity at point-of-cut. Low-foam detergents keep process soils from redepositing on machines and parts. Low odor and low mist, C380 contains no chlorine, phenol, nitrites, copper, triazines, silicone, phosphorous, or SARA 313 reportable chemistry.

Edmund Optics    Barrington, NJ 08007
Feb 17, 2010 TECHSPEC® Hot Mirrors reflect heat while transmitting visible light. Its multilayer dielectric coating is optimized for over 95% reflection for IR wavelengths from 700-1,150 nm and over 90% transmission for visible light from 400-690 nm. Used to prevent damage from heat build-up, TECHSPEC Cold Mirrors feature multi-layer dielectric coating optimized for over 95% reflection of visible light and over 90% transmission of IR light. Various diameters, dimensions, and shapes are available.

Parker Hannifin Corp., Precision Fluidics Div.    Hollis, NH 03049
Feb 17, 2010 Supporting flows up to 240 Lpm and inlet pressures to 60 psig, VSO-MAX weighs 70 g and requires less than 2 W of power for operation. Face seal manifold mount design facilitates integration of miniature package, which occupies 0.87 in.³, and exhibits sustained performance rated over 25 million life cycles. Suited for medical, analytical, and pathogen detection devices, valve supports 5, 12, and 24 Vdc standard control voltage ranges.

Kontron    Poway, CA 92064
Feb 17, 2010 Powered by 45 nm Intel® Xeon® LC5518 processor with PCIe Gen 2.0 I/O and up to 8 MB shared Last Level Cache, Model AM5030 hosts up to 24 GB ECC memory at 1,066 MHz implemented as 3-channel interface. Card has two 10 GbE interfaces in accordance with AMC.2 for networking capabilities. Full-size, double-wide module also offers connectivity in accordance with AMC.1 (PCIe x4) and AMC.3 (2x SATA) plus 2x SATA at extended AMC connector, providing overall 4x SATA for demanding RAID applications.

Master Magnetics, Inc    Castle Rock, CO 80104
Feb 17, 2010 Available in 36 and 48 in. models, Hang-Type Sweepers offer 330 and 440 lb of pull, respectively, while 18 in. Push-Type Sweeper features height-adjustable handle and 7 in. wheels with adjustable sweeping height from .5-2.5 in. All include release handle for quick and safe release of collected material. Permanent magnet assemblies are suited for removal of hazardous scrap metal debris from warehouses, loading docks, parking areas, runways, job sites, and workshops.

Tornado® Industries, Inc.    West Chicago, IL 60185
Feb 17, 2010 Featuring sound levels of less than 66 dB, CV 30 incorporates true-HEPA filtration and helps protect user health and environment. Upright vacuum cleaner has ergonomic handle and shock-absorbing wheels to reduce operator fatigue.

Hand Held Products    Skaneateles Falls, NY 13153
Feb 17, 2010 Featuring Intel Atom 1.6 GHz processor with 64 GB SSD and 2 GB of DDR2 RAM, Algiz 7 runs on MS Windows 7 Professional OS and comes standard with Bluetooth, WLAN, GPS, and built-in 2-megapixel camera with LED light. IP65-rated tablet has 7 in. widescreen, weighs only 2.4 lb, and withstands humidity, vibration, drops, and extreme temperatures. Hot-swappable 2,400 mAh dual battery pack allows for changing batteries without shutting down. Tablet is Gobi(TM) 2000 technology ready.

Rab Lighting, Inc    Northvale, NJ 07647
Feb 17, 2010 Available in warm and cool light, full-cutoff 20 W LPACK20 features 2 high-output, 10 W LED light engines that deliver 70% of rated lumens at 50,000 hr and have voltage sensing driver for 120-277 V. Wallpack features thick, die-cast housing and heat-sinks, which dissipate heat away from critical LED components. Available in bronze or white finish, product suits commercial and residential applications to light entrances, pathways, and facades, and is UL Listed for wet locations.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Feb 17, 2010 Using Control Link(TM) Rotation System for 180° drum rotation, Explosion-Proof Drum Discharging/Feeding System safely inverts drums of dusty powders, then meters material into existing screener. MTS hydraulic Lift & Seal System(TM) seals drum outlet to dust-tight pour cone, while stationary docking transition module supports rotary valve feeder and tool-free connection to screener inlet. All product contact surfaces are polished 304 stainless steel.

Safety Technology International    Waterford, MI 48327
Feb 17, 2010 Constructed of die cast aluminum, STI-7150K protects camera from vandalism and tampering and features removable tethered lid that allows quick access for servicing or installation of camera. Product consists of sturdy housing unit, mounting bracket, blower, lens heater, and sun shield that can reduce internal temperature by 4°F. Mounting bracket allows wires to be fed through, while 24 Vac input with 12 V DC terminals eliminate need for additional power supply for camera.

Asahi/America    Malden, MA 02148
Feb 17, 2010 Able to withstand aggressive chemicals over extended period of time, Polytetra electric heaters feature stainless steel electrical conductor and electrical cord sheathed in PFA. Connections from conductor to cord are housed within water-tight, machined PTFE block for corrosion resistance. Available in standard models from 120-600 V and 350-4,000 W of continuous power, heaters are offered in standard lengths from 3-15 ft and can be factory bent in any custom shape.

TURCK, Inc.    Plymouth, MN 55441
Feb 17, 2010 Explosion-proof, feed-through receptacle Model 7/8-16UN minifast® is rated for 600 V and 9 A, withstands pressure of 2,000 psi, and installs into ½-14 NPT threaded conduit entries. Fully potted 316 stainless steel housing offers IP67 protection when mating connector is attached. When used as secondary conduit seal, CSA certified product prevents gas migration and has 30 V and 600 mA rating. Unit can be used in Class I, Division 2 locations, without intrinsically safe circuits.