Green Edge Systems, Inc    Woodland Hills, CA 91364
Feb 23, 2010 Tel-Tru Check-Temp Thermometer Calibrators enable accurate verification of thermometer accuracy at temperature points critical to School Food Services applications. Devices offer various factory-set single and dual calibration points, and specified models fit probes up to .250, .125, .187, and .375 in. dia. Traceable to NIST, products also feature built-in circuitry that warns if unit is more than 1° out of calibration.

Dr. Shrink, Inc.    Manistee, MI 49660
Feb 23, 2010 Holding approximately 600 sq ft of plastic, each REBAG® Kit consists of 30 x 50 in. clear bag with shrinkwrap removal directions printed on it, closure device, and prepaid UPS return label. To use, owner cuts off asset's cover above perimeter band after removing zipper access doors, strapping, and vents, and places it into bag. Bag is then closed with cable tie and self-adhesive return label is attached. Full REBAG® can be picked up by UPS or dropped off at UPS service center.

Appleton Electric    Cambridge, ON N3H2N1
Feb 23, 2010 To accommodate application and code standards that vary globally, XP Hybrid combines factory-sealed, cast, explosion-proof enclosure to house arcing breakers and stainless steel terminal enclosure for field terminations. It is suited for hazardous industrial locations where flammable gases or vapors are present, especially when used in protection of lighting and heat tracing circuits. NEMA-rated construction enables installation indoors or outdoors.

ASCO (Automatic Switch Co., Valve Div.)    Florham Park, NJ 07932
Feb 23, 2010 While 8214(200) Series 2-way NC solenoid valves can be used for fuel gases up to 5 psi, V710(B)/AH(E) Series 2-way NC electro-hydraulic actuated valves can be used with fuel gases up to 15 psi and is available with fast- and slow-opening constructions. Both series come in ¾-3 in. pipe sizes and have aluminum body construction with pressure taps up and downstream. Uses include boilers, furnaces, ovens, heating equipment, gas generators, and kilns.

AVX Corp.    Myrtle Beach, SC 29578
Feb 23, 2010 Housed in 3.2 x 1.5 x 0.8 mm ceramic package, Model ST3215SB has frequency tolerance of ±20 ppm, max ESR of 70 kW, and operating temperature of -40 to +85°C. Standard capacitance range is 9-12.5 pF, and low capacitance versions of 7 pF or less are available on request. Pb-free and RoHS-compliant, reflow compatible tuning fork crystal resonator is suited for consumer and mobile equipment applications.

Carlo GAVAZZI Automation Components    Buffalo Grove, IL 60089
Feb 23, 2010 General-purpose EM21 Series features detachable, connector-less, and battery-less LCD that lets user configure instrument for panel or DIN-rail mounting as energy meter or transducer. It is suitable for active and reactive energy metering for cost allocation as well as main electrical parameter measurement and retransmission. Solution supports single-phase (2-wire), 2-phase (3-wire), 3-phase (3-, 4-wire, balanced, unbalanced) systems for up to 400 VLL.

Ajax Systems Corp    Walnut, CA 91789
Feb 23, 2010 Powered by single 300 W ATX power supply, 1U Model RSC 12106 features 1x full height expansion slot via riser card and up to 4 GB memory. Unit has compact chassis made of heavy-duty cold rolled steel and cooling system that minimizes operating temperature by creating unrestricted flow. Measuring 8.66 in. deep, computer includes 1x slim drive bay, 1x 3.5 in. drive bay, and 2x front USB ports.

Industrial Supply, Inc.    Loveland, CO 80538
Feb 23, 2010 Long and lightweight, Boron Carbide Sandblasting Nozzles are third in hardness to diamond and cubic boron nitride, making them suitable when sandblasting very hard abrasives such as aluminum oxide or silicon carbide. Users can choose bore size and length, as well as aluminum or steel jacket.

American Portwell Technology, Inc.    Fremont, CA 94538
Feb 23, 2010 Optimized for quad-core Intel® Xeon® processor C5500 series with Intel® 3420 chipset, Model CAR-5000 features 2U rack mount chassis, dual sockets for processors, and Intel® QuickPath Interconnect technology, as well as Intel® Turbo Boost, Virtualization, and Hyper-Threading Technologies. Twelve DDR3 memory DIMMs support up to 96 GB system memory. Equipped with variety of Ethernet interfaces and ports, appliance is suited for UTM, IPS, IDS, anti-virus, firewall, VPN, and content filtering.

Chicago Pneumatic Co.    Rock Hill, SC 29730-7463
Feb 23, 2010 Industrial-strength CP3450 series angle grinders feature handle that can be positioned on either side of tool for left- or right-handed operation. Straight grinders in CP3451 series feature soft grip handle and double bearing supported spindle for low maintenance. Both have moveable lock-off throttle, positioned on top or bottom, and rear exhaust with optional silencer kit. Suited for use in harsh environments, they offer over 1,000 hr life with proper maintenance.

Banner Engineering Corp.    Minneapolis, MN 55441
Feb 23, 2010 The iVu Bar Code Reader is able to verify correct content of hundreds of parts/min at production speeds. Integrated 2.7 in. touchscreen display allows users to configure, monitor, and modify inspections on-site without PC or external controller. Exposure times are as fast as 0.1 ms for high-speed assembly lines. Unit features external (single), continuous, and external (gated) trigger modes is enclosed in compact, rugged IP67-rated housing.

Clark Solutions    Hudson, MA 01749
Feb 23, 2010 Model CSLFC transmitters measure flow ranges from 4.5-3,000 gpm in 4-10 in. pipe and provide continuous 4-20 mA flow signal. Manufactured from Schedule 40 epoxy coated carbon steel, units incorporate ULTEM® encapsulated ultrasonic transducers with choice of seal, as well as mixed-signal ASIC with timing, control, and transducer drive circuitry. Devices do not impact flow, pressure, or transit times of fluids and are unaffected by fluid temperatures or viscosities.

Advantech Automation Corp.    Cincinnati, OH 45240
Feb 23, 2010 Housed in metal IP30-rated chassis with operating temperature of -40 to 167°F, Model EKI-7659CPI features eight 10/100 M Power-over-Ethernet ports capable of supplying 15.4 W each, and 2 gigabit 1,000 M ports with combined RJ45 copper and SFP slots for optional fiber connectivity. PoE port status and power output may be monitored from web browser. In addition to open standard RSTP, switch supports ultra fast X-Ring, which guarantees recovery in less than 10 ms.

IntelLiDrives Inc.    Philadelphia, PA 19152
Feb 23, 2010 Measuring 200 mm in diameter, direct drive Planar ServoRing PSR-200 features 40 mm clear center aperture that can be used for air or wire line feed-through or beam delivery. Unit provides peak torque of 45 Nm with 0.2 arc-sec resolution, 0.5 arc-sec repeatability, and 5 arc-sec accuracy. Motor and encoder are directly coupled to eliminate backlash, and precision ball bearings maximize performance with respect to wobble, moment stiffness, and friction.

Continental Fan Mfg. Inc.    Buffalo, NY 14215
Feb 23, 2010 Featuring modular construction, TEK Plug Fans incorporate injection molded GRP polyamide TEK wheel with non-overloading power characteristics and TEFC industry duty motors. Integral mounting panel allows for air circulation in plenum, while keeping motor external to air stream. Providing quiet operation, fans are suited for OEM applications where plenum air circulator is required, including supply or return applications.

ABB Inc.    Auburn Hills, MI 48326
Feb 23, 2010 Consisting of 5-axis overhead robot arm mounted on linear gantry, Model IRB 6620LX is suited for machine tending, material handling, and assembly operations. Robotic arm features IP67 rating and can be mounted either upside down or sideways on linear axis. Ranging in height from 8-13 ft and in length from 6-108 ft, linear axis can support up to 2 robots, and provides ability to serve several stations or machines simultaneously or in programmed coordination.

Hastings Manufacturing Co., LLC    Hastings, MI 49058
Feb 23, 2010 Designed for high-horsepower engines using any racing fuel and injections such as nitrous oxide, Tough Guy® All Steel Nitride (SN) racing rings include all 3 ring grooves in Gas-Nitride hardened stainless steel along with PVD-applied Ceramic (CrN) coatings on first and third rings. Middle ring has stainless steel Napier design, promoting durability and oil scraping capability. Hardening and coating processes lend to wear resistance, coefficient of friction, and heat resistance.

Aremco Products, Inc.    Valley Cottage, NY 10989
Feb 23, 2010 Applied using pneumatic spray equipment, brush, or roller, Corr-Paint(TM) CP4095 orange-pigmented coating provides corrosion protection and color identification on aluminum and steel structures in harsh industrial environments. Single-part, silicone-based, water-dispersible coating system adheres to sandblasted and marginally prepared metal surfaces as well as relatively smooth or rusted surfaces. Coating is resistant to oxidation, UV light, humidity, and salt spray.

Kuriyama of America, Inc.    Schaumburg, IL 60173
Feb 23, 2010 Made of heavy-duty polyurethane, Tigerflex(TM) Series 2020S(TM) features abrasion-resistant TPU liner that is permanently static dissipative and designed to operate in both humid and dry climates. Fabric reinforcement with food-grade, polyester yarn jacket handles suction and high pressure discharge, while embedded grounding wire prevents contamination. Protecting hose tube from cover wear, exposed rigid helix allows hose to slide over rough surfaces.

Sennheiser USA    Old Lyme, CT 06371
Feb 23, 2010 Weighing less than 4 oz, PX 210 BT integrates Bluetooth® and apt-X® coding technologies for sound free of interference. Rechargeable lithium polymer battery provides up to 12 hr of non-stop listening, and audio controls located directly on earpiece let user activate/deactivate Bluetooth function, regulate volume, and navigate playlist. Transmission range is 33 ft max, and neodymium magnets ensure natural and lifelike sound image with frequency response of 15-22,000 Hz.