Synology Inc.
Taipei 103  Taiwan
Nov 24, 2009 Synology Visual Station VS60 monitors multiple IP cameras managed with Synology Disk Station and displays images on connected LCD monitor or TV screen. Solution supports IP cameras features such as PTZ and snapshot and offers 2 USB ports for mouse operation and external disk connection. DSP processes images, lowering power usage down to 5.2 W for entire system, and support for live-viewing of camera inputs in multi-screen wall format suits large-scale deployments.

L & J Technologies, Inc.
Hillside, IL 60162
Nov 24, 2009 Featuring built-in 1.6 GHz CPU and 2.5 in. HDD bay, MCG 3630 Touch Panel Tank Monitor can interface with multiple tanks to display level, temperature, BS&W, and density via Tankway, Modbus, GPE, and wireless protocols. Unit displays information as text and in graphical format for multiple tanks. Supporting host communication back to DCS, PLC, or other accounting software, system enables user to monitor inventory, change parameters, and set alarm controls.

Etip, Inc.
North Aurora, IL 60542
Nov 24, 2009 Universal Filter Preheater(TM) consists of flexible silicone/fiberglass heating pad that wraps around metal filter housing to maintain full contact and evenly transmit heat quickly through metal of filter housing to prevent diesel and bio-diesel fuel gelling in cold weather. Held in place by springs and nylon ties, 4 x 7 in. product converts metal filter housing into heating element and draws 85 W. It is offered in several voltages and designed to fit diameter of 2.5-4 in.

Xilinx, Inc.
San Jose, CA 95124 3400
Nov 24, 2009 Broadcast Connectivity Targeted Design Platform with Xilinx® Virtex®-6 FPGAs simplifies development of serial digital interface (SDI) solutions for high-performance broadcast A/V systems. Multiple channels of SD, HD, and 3G-SDI video can be implemented in one Virtex-6 device that includes up to 24 transceivers supporting line rates to 6.5 Gbps. Kit integrates Virtex-6 LX240T device on ML605 evaluation board, FPGA mezzanine card, ISE® Design Suite Logic Edition SDE, and reference designs.

CIT Relay & Switch: Division of Circuit Interruption Technology, Inc.
Maple Grove, MN 55369
Nov 24, 2009 Along with 2-pole switching, J104 Series offers coil voltage choices from 3-48 Vdc. Fully sealed solution has bifurcated gold-clad crossbar contacts, 500k-cycle tested electrical life, and 100M-cycle mechanical life. Operating from -40 to +85°C, relay features dielectric strength of 1,500 Vrms min coil to contact and 1,000 Vrms min contact to contact. Insulation resistance is 100 MW min @ 500 Vdc, and shock resistance is 100 m/s2 for 11 ms.

Mettler Toledo, Inc.
Columbus, OH 43240
Nov 24, 2009 Offered as digital load cell for truck scale applications, POWERCELL(TM) PDX(TM) features self-monitoring capability that proactively helps avoid unplanned downtime and inaccurate weighing. These vehicle scales can be connected together in series, eliminating need for junction box. Cables use submersible quick-disconnect connectors that provide IP68/IP69k seal, and protection against lightning damage is delivered via StrikeShield(TM) system.

Power Partners
Los Angeles, CA 90045
Nov 24, 2009 Accepting up to 305 Vac, 100 Watt PIL100 Series includes constant current models with output from 350-4,200 mA and constant voltage models offering 12-105 Vdc outputs. Units are housed in rugged aluminum enclosure, which meets IP67 waterproof standards, making them suitable for harsh indoor or outdoor applications. Operating from -35 to +70°C, modules include overvoltage, overcurrent, over temperature, and short circuit protection.

VTI Instruments Corporation
Irvine, CA 92614
Nov 24, 2009 Equipped with 16 input channels, Model EX1200-7416 can continuously monitor variety of analog and discrete signals up to 100 V. Each channel has 8-bit DAC that can be independently programmed to set trip level. Model EX1200-7416 also detects transients that cannot normally be captured by typical DMM or scanning measurement system. As part of EX1200 LXI Class A instrument series, module records events with IEEE 1588 time codes to provide precise correlation of event/time data.

Taiyo Yuden (USA), Inc.
Schaumburg, IL 60173
Nov 24, 2009 With 1.2 x 1.0 mm footprint and 0.9 mm (max) profile, CM01S600 features precise wire-wound structure that enables delivery of 10 GHz typ cut-off frequency. It provides noise suppression characteristics without distorting wave pattern of high-speed differential signal interface. Along with 60 X @ 100 MHz typ common mode impedance, characteristics include 0.4 X max DC resistance, 300 mA max rated current, 20 V max rated voltage, and 100 MX min dielectric frequency.

Chassis Plans
San Diego, CA 92123
Nov 24, 2009 Model CCI-17 and CCI-19 Rugged Industrial Grade 1U Rackmount LCD Keyboard drawers include 17 or 19 in. TFT LCDs, providing 1,280 x 1,024 resolution, with antiglare hard coat for protection. Silicon rubber keyboards, sealed to NEMA-4/IP65 standards, offer full travel with tactile feedback to simplify typing. Constructed of 5052-H32 aluminium alloy, units measure 24.4 in. deep and are resistant to shock and vibration. They are powered by native 12 Vdc and rackmount 110/220 Vac supply.

Maxim Integrated Products
Sunnyvale, CA 94086
Nov 24, 2009 Housed in 2.0 x 2.0 x 0.65 mm wafer-level package, Model MAX8649 achieves initial accuracy of ±0.5% at 1.27 V and total accuracy of better than ±2% over load, line, and temperature, allowing processors to run at max clock speed. Synchronous, fixed-frequency step-down converter operates from input supply as low as 2.5 V to support deep-discharge battery chemistries. I²C interface allows programming of output voltage between 750 mV and 1.38 V in 10 mV steps.

General Kinematics Corp.
Crystal Lake, IL 60014
Nov 24, 2009 Available in carbon steel, stainless steel, and food-grade construction, OMNI-SCREEN(TM) C-Series(TM) vibratory screen is built with round body design featuring 2 motors for optimal throughput and material flow. In addition to spiral flow of product from central infeed point, separator offers self-contained, motorized drive with variable vibration amplitude and adjustable angle of attack. Features allow high-capacity wet/dry screening in compact design.

KenBay
Mendham, NJ 07945
Nov 24, 2009 Equipped with 18 x 28.5 in. chute type opening, Series K100 can compact waste into stainless steel containers or plastic bags, or be used as baler for recycling materials. Depending upon type of material being compacted, users can expect compaction ratios from 6 times to double that amount. Units operate from 120/220 V single phase power or 240-480/600 V for marine use. Made of AISI 304 SS, marine version has stainless steel washdown motor and all electrical wiring in waterproof compartment.

Grieve Corporation, The
Round Lake, IL 60073-2898
Nov 24, 2009 Used to dry ceramic parts, No. 1018 electrically heated oven has 180 kW installed in Incoloy-sheathed tubular heating elements and 40 ft x 18 in. x 18 in. workspace. Three 3 hp recirculating blowers provide airflow to workload, which can be accessed via any of 3 independent doors. Oven contains 12 in. wide, ½ in. stainless steel flat wire conveyor belt with 1/3 hp motor drive, 30 in. long open belt loading zone, and 60 in. long open unloading zone.

Xiris Automation Inc.
Burlington, ON L7L6B8  Canada
Nov 24, 2009 Using combination of visible and non-visible illumination sources and single optical path, dual camera PVCI-1500 is configurable for crystalline silicon cell and wafer inspection. It is available in 2 versions: one with high powered back illumination, front illumination and high resolution monochrome camera for incoming cell inspection, and other with multi-angle front illumination and color camera to support cell classification.

Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Nov 24, 2009 Designed to meet requirements of food processors, rugged, waterproof, programmable 6- or 8-channel Multipaq21 data logger records product or air temperatures and transmits data to computer while traveling through oven. IP67-rated unit features operating temperature of up to 185°F, is fully USB compatible, and also incorportes serial port for data transfer. Linkage with Datapaq Insight Software provides data for HACCP and other documentation needs.

Anver Corp. - Anver.Com
Hudson, MA 01749
Nov 24, 2009 Mitey-AirVac(TM) Miniature Vacuum Stations include venturi, internal check valve which maintains vacuum in case of power loss, switches, and gauge. Featuring symmetrical mounting hole locations, they have an aluminum case, weigh 2 lb, and pull 26 in. Hg vacuum with 1.27 scfm air consumption. MTY-1 measures 3.31 x 3.66 x 4.11 in. and MTY-2 is 3.31 x 6.41 x 4.11 in. with flow rates from 0.74-4.4 scfm. Vacuum Stations use standard ¼ in. push-connect fittings.

AMETEK Technical Industrial Products
Harleysville, PA 19438
Nov 24, 2009 Rotron® brushless DC motors come in 47 and 64 frame sizes and accept voltage inputs of 12, 24, 37, 74, 90, and 110 Vdc. Applications include fans, blowers, pumps, and compressors from 0.5-2.25 hp. Series 47 Frame motors are available in lengths of 6.08 and 6.68 in. and achieve continuous torque up to 50 oz-in. and speeds up to 4,425 rpm, while 64 Frame series comes in 7.08, 10.125, 10.36, and 13.34 in. lengths and offers 800 oz-in. continuous torque and speeds up to 3,900 rpm.

Perfect Switch, LLC
San Diego, CA 92121
Nov 24, 2009 Capable of direct currents up to 500 A, POWER-GATE low voltage disconnects require no heat sinking or airflow. Programmable, autonomous solid state relays are designed as central point of connect or disconnect for DC accessories such as inverters, radios, and motors. With high voltage trip, low voltage trip, timing features, logic feedback, and external monitoring, devices are customizable for fleet and OEM applications.

Servomex Group Ltd
Crowborough East Su TN6 3DU  United Kingdom
Nov 24, 2009 Servomex SERVOPRO FID provides 100 ppb resolution hydrocarbon measurement, with all flow electronically and temperature regulated. It includes Ethernet/Internet connectivity, allowing users to check parameters or troubleshoot unit offsite. Device's logarithmic amplifier minimizes drift and thermal noise. Lock Range function allows operator to fix unit within desired range, while automatic ranging feature changes measurement parameters according to impurities detected.