GE Intelligent Platforms    Charlottesville, VA 22911
Apr 08, 2010 Durus Plus controllers feature built-in I/O, control, and operator interface as well as 4 line/16 char display/keypad and high-current outputs. Also included are RTD, analog out, PID, four-function math, and Modbus Master/Slave communications. Solid slide-and-snap mechanical interlock simplifies addition of expansion modules. Suited for lighting, conveyor, and water level control, units also have memory of 300 lines and 260 blocks for function block diagram programming.

Integrated Device Technology, Inc.    Santa Clara, CA 95054
Apr 08, 2010 Available in 14 x 14 mm QFP and 10 x 10 mm QFN packages, PEB383 provides transition from legacy PCI to PCIe to support application migration. It is tailored to match design characteristics of processors, such as Intel and AMD, facilitating integration. Along with low power consumption, features such as buffering and queuing techniques help improve overall system efficiency. PCIe port, which provides 2.5 Gbps throughput in single lane configuration, supports frequencies up to 66 MHz.

Integrated Device Technology, Inc.    Santa Clara, CA 95054
Apr 08, 2010 VersaClock® LP programmable clock generators reduce power consumption and optimize board layout in battery-operated consumer applications. They reduce power requirement to 4-8 mW for single clock output and also reduce power usage during power down (20 µW) and sleep mode with 32 kHz clock active (200 µW). Each of 5 models features 4 internal PLLs, individually programmable and able to generate 4 unique frequencies from 5 kHz to 120 MHz.

Infineon Technologies AG Dep. CIC MC      Germany
Apr 08, 2010 Based on 8051 processor core, 8-bit XC800 150°C Microcontrollers integrate 4-32 KB flash memory, oscillator, voltage regulator, EEPROM, and supervisory circuits. Various peripherals include Capture/Compare Unit for PWM generation, ADC for measurement and hardware synchronization to PWM, and MultiCAN modules with up to 2 CAN nodes. Tested in accordance with AEC-Q100 Grade 0, MCUs are suited for automotive applications in engine compartment and industrial solutions in harsh environments.

Infineon Technologies AG Dep. CIC MC      Germany
Apr 08, 2010 Supporting 40/60/100 W incandescent bulb replacement, Model ICL8001G enables up to 90% efficiency and achieves power factor exceeding 98%. Off-line driver IC features integrated power factor correction and operates with many phase cut dimmers, maintaining greater than 80% efficiency over complete dimming range. Other features include isolated driver output for thermal management, digital soft-start, and integrated start-up cell for instant on.

Infineon Technologies AG Dep. CIC MC      Germany
Apr 08, 2010 Based on X-GOLD(TM) 213 EDGE baseband chip, XMM(TM) 2138 combines Comneon protocol stack, OptiMedia framework, and Red Arrow MMI. Platform supports touch screen, WQVGA display for mobile browsing, Bluetooth for file sharing, and WLAN for Internet access. Chip optimizes audio and video performance with integrated FM radio and computing power of ARM11 core. In addition, XMM 2138 supports both standby and active dual-SIM phones, making both SIM available on network to receive calls or messages.

NEC Electronics    Santa Clara, CA 95050
Apr 08, 2010 Housed in 8 x 8 mm, 56-pin QFN package, IO-Link Solutions combine All Flash(TM) 78K0R 16-bit MCU and IO-Link transceiver with integrated IO-Link slave protocol stack in single chip. MCUs come in 4 flash memory sizes of 32, 64, 96, and 128 KB. By adopting IO-Link MCU/Transceiver solutions, IO-Link system designers can implement communications and control of sensors/actuators to realize IO-Link slave applications.

NEC Electronics    Santa Clara, CA 95050
Apr 08, 2010 To support applications that require precision analog sensing capabilities, All Flash(TM) 78K0/Kx2-A MCU series integrates analog functionality for battery-operated portable devices, 78K0 MCU interface, as well as various safety features and interfaces. Flash memory capacities range from 16-32 KB, and package options include 30-pin SSOP or 48-pin low-profile QFP. Each IC includes up to 12 channels of 12-bit ADCs and 3-channel op-amps interlocked with 12-bit ADC inputs.

NEC Electronics    Santa Clara, CA 95050
Apr 08, 2010 Suited for handling critical vehicle loads, intelligent power devices (IPDs) combine embedded power MOSFET for switching and control chip for protection features in one 5-pin TO-252 package. Model µPD166017, with on-state resistance of 6 mX, can drive high-current lamps and heating elements and has analog current sense coupled to diagnostic function. While µPD166019 exhibits reduced parasitic noises, optimized drive performance of µPD166020/21 minimizes PWM losses.

NEC Electronics    Santa Clara, CA 95050
Apr 08, 2010 Available in versions with 1 or 2 embedded ARM Cortex(TM)-A9 CPU core, EMMA Mobile(TM)/EV SoCs enable portable devices to process HD content and 3D graphics. Technologies such as automatic clock control, on-chip power switch, and quick recovery minimize power consumption, and HD-capable A/V engine enables decoding of various formats. Also included, POWERVR(TM) SGX(TM) 3D graphics core enables 3D processing at 14.7 megapolygons/sec as well as pixel-filtrate performance of 500 megapixels/sec.

Panasonic Factory Solutions Company of America    Buffalo Grove, IL 60089
Apr 08, 2010 PanaCIM(TM) Enterprise Edition MES software v8.1 offers primary/dependent part binning support to automatically assist with part class matching requirements, which is beneficial for LED applications. Offline feeder and cart setup reinforces correct component reel-to-feeder and feeder-to-cart locations before production starts. Available in multiple languages, including Japanese, product consists of 9 modules covering production, materials, traceability, maintenance, and more.

Pandjiris Inc.    St. Louis, MO 63110
Apr 08, 2010 Combining adjustable base positioner with adjustable height outboard stand, Delta Systems accommodate wide range of pipe diameters. Outboard stand rides on V groove casters on V track to maintain consistent centerline of rotation, while manual manipulator, mounted on push cart on V track, allows positioning of welding torch anywhere along length of pipe. Dovetail slides with mechanical oscillator permit torch positioning and adjustment along with ability to weld range of joint configurations.

Piab AB      Sweden
Apr 08, 2010 PVBS 3 control systems and decentralized modules use compressed air-driven technology that enables recovery of up to 75% of energy used to power units. Decentralized system, which includes regulators for each unit on vacuum and blow pump module, enables printer to set pump values so they fit actual print job. Able to be fitted beneath press or catwalk, system is monitored via touchscreen operator terminals and program recipes for different printing assignments can be saved in control unit.

GAF Materials Corp.    Wayne, NJ 07470
Apr 08, 2010 DuraLife(TM) Natural Grain Collection is manufactured from high-density polyethelene (HDPE)/rice hull formulation, has appearance of real wood, and does not splinter, warp, crack, or rot. Deck boards are reversible and feature natural, deep wood grain emboss on one side and combed emboss on opposite side. Product installs using traditional face fastening method or with Sabre(TM) Clip hidden fastener system. It also does not require annual sanding or staining.

Liquid Process Systems, Inc.    Indian Trail, NC 28079
Apr 08, 2010 Able to integrate within any new or existing facility, Vector Series Model VB10C continuously filters contaminants on side stream basis down to 10 microns. This keeps fluids clean for higher heat transfer and plant efficiency, longer fluid life, and minimal maintenance downtime. Able to withstand 150 psig max pressure and temperatures to 650°F, system offers flow rate and cleaning capacity of up to 15 gpm or 900+ gph. Electronic filter condition monitoring system is also available.

Inkcups Now    Danvers, MA 01923
Apr 08, 2010 Model ICN-2200L pad printer has 18-station linear conveyor which can be interfaced with automatic loading and unloading systems. Shot pin print station registration is included on conveyor for ±.001 in. imaging precision, while micro-adjust system moves conveyor in and out for positioning of graphic on part. Product also features XYR micro-adjust plate holder assemblies and tool-less quick adjust pad mounts. Unit is offered as 1- or 2-color pad printer.

Vaisala, Inc.    Woburn, MA 01801 1008
Apr 08, 2010 Based on HUMICAP® sensor technology, high performing humidity and temperature probe HMP110 covers full humidity range in temperatures from -40 to + 80°C. Compact probe is simple to install, maintain, and change. Offering measurement stability for long periods of time, probe is suited for tightly regulated environments in pharmaceutical, biotechnology, and medical device industries. Each individually adjusted probe comes with calibration certificate traceable to NIST.

Kelley Company    Carrollton, TX 75006
Apr 07, 2010 ENERGY GUARD(TM) provides perimeter seal along sides and rear hinge of dock leveler, blocking dirt, debris, and insects while also preventing energy loss. Sealing gaps between dock leveler and concrete pit walls up to 9 in. above dock level, product has no mechanical components or springs and does not incorporate curtains or fabric that blocks access to dock leveler or pit. Assemblies can be ordered for retrofit to existing Kelley and some competitive dock levelers.

Aeroflex    Irvine, CA 92618
Apr 07, 2010 Model GPSG-1000 portable GPS and Galileo positional simulator can be configured with single-channel, 6-channel, or 12-channel simulation. Simulating L1, C/A code, and L1C, L2C, and L5 GPS modernization signals as well as Galileo E1, E5, and E6 signals, it uses modular technology for RF/baseband signal generation to ensure accuracy/repeatability. Tests include acquisition sensitivity, tracking sensitivity, subsystem simulation for 3D flight execution, positional accuracy, and more.

Emerson Process Management    Austin, TX 78754
Apr 07, 2010 Rosemount® 2160 vibrating fork liquid level switch is unaffected by flow, bubbles, turbulence, foam, vibration, solids content, coating, liquid properties, and product variations. Operating in temperatures from -94° to +500°F, product wirelessly communicates switch output state, diagnostics, and PlantWeb alerts and operates in WirelessHART mesh network. For optimal mounting, unit installs horizontally or vertically and features omnidirectional aerial and rotatable housing.