IMEC    Leuven   Belgium
Feb 22, 2011 Digital front-end component for spectrum sensing hosts dedicated ASIP (application-specific integrated processor) that can perform flexible synchronization and spectrum sensing for WLAN (802.11a-n), cellular standards (including 3GPP-LTE), and digital broadcasting standards. It connects to imec analog reconfigurable radio chip (SCALDIO) and programmable digital baseband platform for 4G seamless connectivity (COBRA). Solutions enable multimode communication with efficient use of spectrum.

Magnaray    Sarasota, FL 34243
Feb 22, 2011 Offered in symmetric and asymmetric designs, W2PT5048 and W3PT5048 Series are cantilevered, dual pole-mount luminaires that deliver instant-on, low-glare, white lighting. Uniformly distributed outward- and downward-aimed fluorescent lamps, 2 per luminaire, operate with 89% light-emitting performance. Attached to single vertical pole, 2/3/4 horizontal twin T5 fluorescent light housings can be stacked to project beyond their support fulcrum. Each lighthead consumes 53 W per twin T5 lamp.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Feb 22, 2011 Helpful for maintenance and diagnostics in remote locations, LS680 Series can transmit signals, such as live video and other communication information, without operating controls or programming. Tamper-proof, plug-and-play solutions transmit protocol-free, accommodating various industrial Ethernet topologies without requiring any changes. Series transmits signals from 0-150 m with 180 m threshold distance and data at rate of 100 Mbps via 100 Base-TX interface.

GL Communications Inc.    Gaithersburg, MD 20877
Feb 22, 2011 Equipped with USB and Ethernet interfaces, tProbe(TM) T1 E1 VF and Serial Data Analysis and Emulation Hardware provides T1 E1 pulse shape and jitter measurement analysis, VF Drop and VF Insert capabilities, and optimized circuitry for accurate Digital Line Level measurements. Cross-port Through and Cross-port Transmit modes facilitate Drop/Insert and Fail-Safe Inline monitoring. Measuring 6.05 x 5.55 x 1.60 in., system supports both Windows XP and Windows 7 operating systems.

Ramtron International Corp.    Colorado Springs, CO 80921
Feb 22, 2011 Products include FM24W256 W-family models with 256-Kbit serial I2C interface, as well as FM25W256 units with SPI interface, while parallel communication interface is available in 64-Kbit FM16W08 and 256-Kbit FM18W08 devices. Memory systems offer 100 trillion reads/write cycles and 38 yr data retention, and operate over industrial temperature range of -40 to +85°C. Packaging includes 8-pin SOIC for serial devices and 28-pin SOIC for parallel devices.

AXIOMTEK    Taipei   Taiwan
Feb 22, 2011 Based on 1.8 GHz Intel® Atom(TM) D525 dual-core processor with 4 GB DDR3 system memory, Model DSB-300 uses hardware decoder to support high-definition images and videos and provides 1,920 x 1,080 resolution. Fanless unit has dust-proof enclosure, enabling use in severe operating conditions. In addition to 2 PCI Express Mini Card slots for wireless LAN, player includes 4 USB 2.0 ports, one 10/100/1000 Mbps Ethernet port, and 1 VGA connector.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Feb 22, 2011 Featuring integrated high-side and low-side FETs, Models LM21212-1 and LM21215 are suited for FPGAs, ASICs, and microprocessors used in low-voltage applications. Model LM21212-1 features output current up to 12 A with synchronizable switching frequency, while Model LM21215 provides resistor-programmable current limit, allowing up to 15 A of continuous output current. Housed in 4.4 x 6.5 x 0.9 mm packages, both operate over input voltage of 2.95-5.5 V and produce output voltage down to 0.6 V.

IBASE Technology Inc.    Taipei   Taiwan
Feb 22, 2011 Featuring IBASE MI953AF Mini-ITX motherboards with 2.66 GHz Intel® Core(TM) i7-620M CPU, AMI200-953 barebone system is powered by 80 W adaptor and comes with 4 GB DDR3 memory and 40 GB industrial-grade HDD. Silver aluminum housing occupies 199 x 232 mm footprint and allows use as desktop PC or wall mount system. Front panel USB 2.0 ports supplement rear I/O, which is equivalent to motherboard edge connectors comprising those for DVI-D, VGA CRT, serial, USB, PS/2, audio, and DC-in jack.

Meyda Tiffany    Yorkville, NY 13495
Feb 22, 2011 Made from recycled glass, Wine Bottle Pendants of Coastal Collection feature customized nautical designs. Amber Frosted Mini Wine Bottle Pendant (124011) has Anchor sandblasted design and is softly etched for diffusion. Bottle, which measures 3 in. wide, has hand-wrapped white whip line accents and cloth covered wire. Hardware is hand finished in black powder coat. Installed 16-84 in. from ceiling, fixture features 13 in. tall shade and accommodates 40 W T6.5 bulb.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Feb 22, 2011 As 18 V tool with adjustable clutch, M18(TM) model 2615-20 provides 11 torque settings and one drill mode for complete control in close-quarter fastening applications. Extended paddle switch design aids trigger actuation from top, middle, or bottom of tool, while 3/8 in., one-handed, keyless ratcheting chuck facilitates and accelerates bit changes. Tool produces up to 125 lb-in. torque, operated from 0-1,500 rpm, and is powered by REDLITHIUM(TM) technology.

Hitex Development Tools      Germany
Feb 22, 2011 Tessy is tool for automated module/unit/integration testing of embedded software that provides ability to control test hardware prior to test. Program supports hardware that can be on-chip peripherals of microcontroller or hardware external to microcontroller. Connected via software adapter, product uses software adapter to determine test results, which are values recorded during or determined after test. Signal configuration is specified using configuration file in XML format.

DuctSox    Dubuque, IA 52002
Feb 22, 2011 SkeleCore(TM) in-duct cylindrical tensioning device maintains inflated appearance, even during idle air handler periods, and eliminates popping sound associated with equipment start-up. Product consists of ¾ in. dia aluminum tube supporting 3/16 in. dia powder-coated steel, and 360° connecting rings which add tension to inner fabric duct walls. Tubes are 6 ft long and snap into support rings and couplers, and product is available in 15 diameters ranging from 8-36 in.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Feb 22, 2011 Used for attaching dissimilar panel materials and/or multiple panels, PEM® Type SGPC(TM) studs torque-out resistance and allow for close centerline-to-edge distance to suit limited-space applications. Studs install into sheets as thin as .024 in. and in multiple panels whose total thickness does not exceed max sheet thickness of .047 in. Manufactured from 300 Series stainless steel, products can be used in sheets of any hardness and comes in thread sizes No. 2-56 through ¼-20 and M2.5-M6.

MAG IAS, LLC    Erlanger, KY 41018
Feb 22, 2011 Featuring 16-flute design, CYCLO CUT Max-Flute end mills run at 2,037 rpm and 231 ipm to enable machining of internal structures in titanium, Inconel, and stainless steel components with removal rates up to 8 in.³/min with 25 lb-ft torque and 9 hp. Shallow, radial widths of cut minimize heat transfer to cutting tool and maximizes surface speeds for roughing high-temperature alloys. Used in conjunction with TrueMill® software, end mills maintain constant angle of engagement.

MAG IAS, LLC    Erlanger, KY 41018
Feb 22, 2011 HyperMach® H-Series is available with choice of spindle speeds and torques to match material requirements for high-speed machining of aluminum, high-torque titanium cutting (HyperMach GTi), or wide range (HyperMach Ti). While 2 x 4/5/6/7/8 m fixed-column, traveling table arrangement is standard, moving column configuration is also offered to handle single or nested parts up to 2 x 20 m. All machines are available with optional 3 m wide pallets, increasing Y-axis travel to 3,200 mm.

Omega Engineering, Inc.    Stamford, CT 06907
Feb 22, 2011 Without requiring any special software aside from Web browser, OMEGA® iTHX-SD lets users monitor and record temperature, relative humidity (RH), and dew point over Ethernet network or Internet. It serves Active Web Pages to display charts and real-time readings or log data in formats compatible with spreadsheet and DAQ programs. Along with two 1.5 A relays, unit comes with removable 2 GB SD Flash Memory card that can store up to 7 years of readings taken at 10 sec intervals.

Mini-Circuits    Brooklyn, NY 11235
Feb 22, 2011 Suited for interconnection of coaxial components or sub-systems, 141 Series and 086 Series Hand-Flex Coaxial Cables include silver-plated copper-clad steel center conductor, which maintains shape after bending. Outer shield is copper braid, tin soaked, which minimizes signal leakage while enabling flexibility. Connectors have passivated stainless-steel coupling nut over gold-plated connector body. Jacketed and unjacketed options are available.

TRIATEK    Norcross, GA 30093
Feb 22, 2011 Featuring touchscreen technology, Model HMS-1650L displays both numerical data as well as general fume hood status via background color. Unit indicates if fume hood is in safe, warning, or alarm status depending on if background is green, yellow, or red, respectively. In addition, controller can display face velocity, sash position, temperature, date, and time on single screen. Suited for LON networks, Model HMS-1650L can be deployed as either controller or monitor.

Aven, Inc.    Ann Arbor, MI 48108
Feb 22, 2011 Equipped with LCD and non-contact voltage sensor, Pen-Style Digital Multimeter measures, tests, and troubleshoots any electronic device or circuit board. Unit measures AC/DC voltage, minivolts, current, and resistance for capacitor checks, level tests, diode tests, and continuity tests. Operating on two AAA batteries, pocket tool includes max value hold, data hold, automatic power shutoff, resettable fuse, and rubber molding for impact protection.

Devar, Inc.    Bridgeport, CT 06605
Feb 22, 2011 Featuring 0.4 in. high, 7-segment, red, LED display, Models d-RTT and d-RTTI can sense ambient room temperature across operating range of -40 to 180°F with display resolution of 0.1 degrees. Units have operating voltage range from 10-28 Vdc and provide 4-20 mA output signal, linear to measured temperature to within ±0.1°F. High precision 1,000 W RTD sensor, attached to backside of black anodized aluminum heat sink visible on front of instrument, conforms to DIN Standard EN 60751, Class A.