Asymtek    Carlsbad, CA 92008
Mar 07, 2011 Designed to jet 0.1-0.2 mm dots through windows as small as 0.4 mm into LED cavities, Spectrum(TM) S-920N automatically maintains consistent shot weight with software-managed dispense parameters. Closed-loop dispensing eliminates need for constant operator adjustments. Non-contact fluid dispensing system is suited for manufacturing side-view LEDs, which are used to illuminate displays in devices such as tablet computers, smart phones, and e-readers.

Saelig Co., Inc.    Pittsford, NY 14534
Mar 07, 2011 Based on Atmel ATXMEGA32A4 MCU, with 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM, Xprotolab offers 44 kHz arbitrary waveform generator capabilities and can be mounted on breadboard/PCB for in-situ testing/verification. Integrated 128 x 64 pixel OLED display provides functions of 8-bit mixed-signal oscilloscope with simultaneous sampling of analog/digital signals, providing 2 analog and 8 digital channels. Max input is ±10 V with 2 MS/sec max sampling rate, resulting in 320 kHz analog bandwidth.

SEH Technology, Inc.    Phoenixville, PA 19460
Mar 07, 2011 Compact myUTN-80 DongleServer provides network access to 8 USB license dongles. Designed for USB software key management, unit makes dongles available centrally and keep them safe from loss, damage, and theft. Dongles can be assigned to different users, customers, or departments, and security features protect unauthorized access. Device enables utilization of USB license dongles in server-based computing infrastructures and virtualized environments.

Whitford Corp.    Elverson, PA 19520
Mar 07, 2011 Offering alternative to PFA powder, Xylan HB Waterborne Fluoropolymer Coatings provide optimal release characteristics. Products can be applied at films to 75 microns thick with one cure and up to 125 microns with longer-than-normal cure cycles. With ability to form thick films, coatings offer extended wear characteristics and are suitable for applications with rough surfaces, from commercial waffle irons to molds that are recycled repeatedly. All are FDA-compliant.

Siemens Industry, Inc.    Elk Grove Village, IL 60007
Mar 04, 2011 Exhibiting efficiency levels up to 94%, 1FK7 series integrates encoder with DRIVE-CLiQ interface as well as high inertia design that demonstrates optimized dynamics and control properties. Mechanical decoupling of encoders from motor shaft increases ruggedness and serviceability, while integration of encoder interface electronics allows compact motor design for simplifying machine installation. All models are resistant to vibration and shock.

GOEPEL electronics LLC    Austin, TX 78759
Mar 04, 2011 PicoTAP JTAG/Boundary Scan Controller provides pre-configured plug-in Test Access Port (TAP), so it can be directly plugged to assembly being tested. Designed for simple Boundary Scan test and programming tasks, unit is controlled by USB 2.0 interface and doesn't require additional voltage supply. System's 5 V auxiliary supply voltage is switchable at TAP interface and programs generated are cross-compatible to SCANBOOSTER® and SCANFLEX® platforms.

Power Integrations, Inc.    San Jose, CA 95138
Mar 04, 2011 Available in simplified and traditional Chinese, Japanese, Korean, Russian, and English, PI Expert(TM) Suite v8 simplifies power supply design process by generating complete schematic. Program also delivers design and build instructions for custom-optimized power transformer along with corresponding bill of materials. While able to perform thermal calculations to optimize heatsink performance, software also provides PCB layout recommendations based on device and package chosen.

Elma Bustronic    Fremont, CA 94538
Mar 04, 2011 CompactPCI PlusIO Backplane, offered as 8-slot version in 3U height, complies with PICMG 2.30 specifications, which expands backplane with serial point-to-point connections for high-speed data transfer. In addition to one cPCI PlusIO system slot that provides connections for 4 x USB2, 4 x SATA, 4 x PCIe, and 2 x Ethernet, features include 4 cPCI PlusIO peripheral slots and 3 legacy slots. Standard FR-4 PCB material is used on 8-slot backplane, and rear IO is supported.

J. W. Winco, Inc.    New Berlin, WI 53151
Mar 04, 2011 Part complete line of tube connection and conveyor components, Series AN 7870.1 Stainless Steel Square Flange Bearings have flanged housing and double-sealed through-hole ball bearing. Units are metric-sized, RoHS-compliant, and are typically used to support a rotating shaft or tube as part of a conveyor construction.

Datalux    Winchester, VA 22602
Mar 04, 2011 Combining Intel Atom processor and 19 in. LCD in single sealed enclosure, medical-grade IPIX e-Series can be used as stand-alone PC or operated as virtual desktop in client-server environment. Front panel features IP65 protection rating, and all molded plastic parts contain antimicrobial additive. System can also be sprayed and wiped clean with hospital disinfectants. Operating without fans or cooling, computer includes 5 USB ports, RS-232, and Gigabit Ethernet.

Pepperl + Fuchs, Inc.    Twinsburg,, OH 44087 2245
Mar 04, 2011 Model VAA-2E-IER2-S-1M-V1 switches measure 36 x 13 x 26.2 mm while VAA-2E1A-IER1-S-1M-V1 units have 87.5 x 13 x 25 mm housing with LED status indicators. Suited for safeguarding small doors and coverings, CAT4 magnetic safety switches feature coded magnet system with fixed cable and M12 connector. They mount in any position and include encapsulated electronics for IP67/IP69K protection. Offering 108 switching cycle lifespan, switches operate in temperatures from -4 to +140°F.

AXIOMTEK Co., Ltd.    Taipei   Taiwan
Mar 04, 2011 Compliant with IEC 61850-3 and IEEE 1613 standards, Model iCON-47000 provides 4-8 10/100Base-TX RJ-45 ports and two 100Base-FX ports. Hardened, unmanaged Ethernet switch features 10/100 Mbps and full/half-duplex auto-negotiation as well as auto MDI/MDIX operation. Supporting DIN-rail or panel mounting, switch has IP30 protected housing with 60 x 125 x 145 mm form factor, operating temperature of -40 to +75°C, and redundant 12-48 Vdc power inputs via terminal block or power jack.

Parker Hannifin Plc    Barnstaple Devon EX31 1NP  United Kingdom
Mar 04, 2011 Designed to maintain peak flow rates, Parker 944B and 955B High PSI Assemblies are manufactured with heavy wall of PTFE and come in lengths up to 25 ft with carbon or stainless steel female JIC fitting on each end. PTFE tube, reinforced with braided SS 304 wire, has static dissipating liner that provides path of continuity to end fittings for negating possible electrostatic charges. Sizes range from ¼-1 in. ID, and design handles temperatures from -65 up to +400°F.

Huron Technologies, Inc.    Leslie, MI 49251
Mar 04, 2011 Designed for use in heat-cured silicone rubber applications and developed specifically for engine gaskets, Release Coating 7880 offers release properties that prevent tearing of silicone rubber during demolding. Water-based solution also prevents surface flaws, such as knit line defects, and can be used at mold temperatures from 320 to 380°F. It works equally with single or multiple mold cavities and minimizes buildup, increasing number of cycles between mold cleaning.

ABB Robotics, Inc.    Auburn Hills, MI 48326
Mar 04, 2011 Along with 1.85 m reach and 15 kg payload, Integrated Dress pack (ID) model IRB 2600ID features flexible mounting options and work envelope that extends below robot's baseline. Multipurpose robot, with swing base radius of 337 mm and base width of 511 mm, comes with Quick-Move motion control software for max acceleration at all times. Flexible conduit in upper arm/wrist, used for routing cables and hoses for signals, air, and power, simplifies integration of process equipment with robot.

STMicroelectronics    Lexington, MA 02421
Mar 04, 2011 Manufactured using low-voltage planar technology that incorporates double-metal process for maximum cell density, Model 3STR1630 features minimum BVCEO of 30 V and equivalent on-resistance of 100 mW at hFE figure of 50. NPN transistor is housed in SOT-23 package suited for use in LED drives, motor and relay drives, and DC-DC converters.

General Tools & Instruments    New York, NY 10013
Mar 04, 2011 Line of SD Card Real-Time Data Logging Instruments include devices for measuring temperature, pressure, humidity, air velocity, vibration, water quality, and sound level. Data is stored on internal, 2 GB SD cards, which insert into computer and automatically open Excel file to show measured values. Sampling intervals and length of time are adjustable and, as data is collected, time and date stamp fields are populated automatically. Instruments are powered by batteries or optional AC adapter.

techMatrix, LLC    Eden Prairie, MN 55346
Mar 04, 2011 Able to scale from one system to dozens of systems across multiple facilities, WeldWorks(TM) v2.0 collects process data in resistance weld controllers and monitors. Users can search and export weld records based on specific criteria, and different chart types offer row-by-row data selection granularity within integrated statistics module. Along with base database storage size of 10 GB, solution offers zoom and scroll graphing capability to aid weld process signature analysis.

Saelig Co., Inc.    Pittsford, NY 14534
Mar 04, 2011 Implemented with USB Mass Storage Class driver and UASP driver, Model PL2771 supports USB3.0 SuperSpeed 5 Gbps transfer rates between USB3.0 and SATAII devices. Internal embedded 8-bit microcontroller enables applications such as one button backup, power control, and other features for USB connection. Packaged as 48-pin QFN or 64-pin LQFP device, controller uses 30 MHz reference clock and is hot-plug Serial ATA Rev.2.6 compliant. Internal core runs on 1.2 V, while I/O lines operate at 3.3 V.

Rush Machinery, Inc.    Rushville, NY 14544
Mar 04, 2011 Built with heavy-duty, one-piece, cast iron base that provides rigidity and minimizes vibration, Model FC-250W is designed for truing and dressing of flats, angles, and radii on diamond and CBN single wheels and multiple wheel packs. In addition to automatic power zoom and 2-axis DRO for measurement, features include computer-driven vision system with software program specific to this machine and its various applications.