Strippit Inc.    Akron, NY 14001-1321
May 12, 2010 Combining dynamic, high-speed 20 metric ton hydraulic ram with 48-station turret, Strippit VX-Series delivers speeds up to 530 hits/min on 1 in. centers and up to 1,750 strokes/min. Full 1 in. feed clearance between upper and lower turret allows forming for wide range of applications. Able to handle workpieces up to .140 in., systems are equipped with 3 programmable, re-locatable work clamps; PC-based Fanuc control; double-track turret; and table with 330 lb capacity.

Numerical Control Computer Sciences (NCCS)    Newport Beach, CA 92660
May 12, 2010 Intended for use within aerospace, automotive, and turbo machinery industries, NCL v9.8 includes Smart Forms feature that reduces programming time while increasing tool path efficiency. Application remembers size and location of input dialog boxes to optimize screen space, facilitating selection of graphical data and aiding conformance to user preferences. Overall, software promotes flexibility and options for CAD/CAM programming.

Veeco Instruments Inc. Corporate Headquarters    Woodbury, NY 11797
May 12, 2010 Able to be used on any atomic force microscope (AFM), Sharp Nitride Lever (SNL) Probes feature tip that combines low spring constant softness of silicon nitride cantilever with sharpness of silicon tip. This results in radius of curvature as low as 2 nm. High resolution imaging in air and fluid is possible using Contact Mode and TappingMode(TM) operation, and there are 2 available configurations: NP/DNP levers and MLCT/MSCT levers. All products are built for extended lifetime.

Patriot Memory    Fremont, CA 94538
May 12, 2010 Built with extruded aircraft-grade aluminum heat spreader, 4 GB Viper II Series Sector 5 Edition Extreme Performance DDR3 Memory Modules pass thorough qualification and screening process on multiple motherboards using Intel® P55 chipset platforms and Intel® Core(TM) i7 CPUs to ensure performance at 2,500 MHz with latency timings of 9-11-9-27. Two additional 4 GB module kits operating at 2,400 and 2,133 MHz with timings of 9-11-9-27 and 9-9-9-27 respectively, are also available.

Cooper Lighting    Peachtree City, GA 30269
May 12, 2010 Featuring 270° detection zone with 3 IR sensors that detect motion up to 90 ft away, Precision Plus Doppler Radar Motion Activated Outdoor Security Floodlights activate when side-to-side or front-to-back motion is detected. Use of Doppler radar minimizes false triggering since it reacts to actual motion, rather than wind, rain, and temperature changes. Designed to turn off after pre-selected time delay of 1-12 min, units include photo cell that keeps lights off during daylight hours.

Pak-It, LLC    Philadelphia, PA 19124
May 12, 2010 Available as bulk chemical or in pre-measured water soluble packets, Traction-Pak(TM) can be used in automatic scrubber or dissolved in mop bucket and applied, leaving behind burnishable thermoplastic film. Active cleaning ingredients loosen soil and remove black heel marks, while other active materials react with or penetrate floor finish film substrate, replenishing vital plasticizers that may have been extracted by harsh chemicals or abrasion. Floors are left glossy but safe.

F5 Networks    Seattle, WA 98119
May 12, 2010 With BIG-IP® v10.2 Application Delivery Networking software, enterprises and service providers can realize potential of on-demand IT through dynamic services model. Program integrates disparate technologies for application delivery, security, optimization, data management, and infrastructure control. Unified application delivery architecture enables customers to implement centrally managed security enforcement policies that provide user access according to IT requirements and business needs.

GE Intelligent Platforms    Charlottesville, VA 22911
May 12, 2010 Based on Altera® Arria® II GX FPGA and 2 TI DSPs, Model ICS-8580 can support 2 channels of HD video or 4 channels of SD video. Rugged plug-and-play unit features H.264 video compression codec, but is software-reconfigurable to support alternatives such as JPEG2000. Module provides input support for HD/ED/SD analog input signals, analog RGB formats from VGA to UXGA, as well as digital input formats such as 3G-SDI, DVI, and HDMI up to max resolution of 1,920 x 1,080 or 1,600 x 1,200 pixels.

Bison Gear & Engineering Corp.    St. Charles, IL 60174
May 12, 2010 AUTONOmotor(TM) variable-speed, brushless DC, parallel shaft gearmotors offer up to 1/6 hp and 19-300 lb-in. continuous torque. Powered by totally enclosed, nonventilated brushless motors, units have all-steel gearing and oil bath lubrication and also provide noise immunity. Speed can be adjusted with supplied potentiometer or 0-5 Vdc signal. Devices are offered in 11 standard versions with gear ratios from 5:1 to 215.6:1 and rated output speeds from 470-11 rpm with 10:1 speed range.

Emerson Process Management    Austin, TX 78754
May 12, 2010 Consisting of permanently installed mechanical interface, sensor/transmitter, Remote Operated Vehicle-based sensor retrieval tool, and hydraulic and control system, Roxar ROV Sensor Retrieval System provides underwater maintenance and repair capabilities. Retrieval process takes place within controlled, leak-proof environment. Since only sensor needing replacement or repair is involved, system eliminates need to manually retrieve entire production asset.

GL Communications Inc.    Gaithersburg, MD 20877
May 12, 2010 Offering PC-based Ethernet/IP BERT and throughput test tool, PacketCheck(TM) is suitable for analyzing 10 Mbps, 100 Mbps, and 1 Gbps LANs and WANs. Traffic generation mode can duplicate packet traffic as it occurred at particular Ethernet interface. Able to test throughputs up to 800 Mbps, application generates multi-stream Ethernet/IP/UDP traffic and measures end to end performance such as Byte Error Rate, Total Packets, Packet loss, Out of Sequence Packets, and Errorred Packets.

Beijer Electronics, Inc.    Schaumburg, IL 60173
May 12, 2010 Combining HMI technology with acid-resistant stainless steel construction, EXTER T150-st is suitable for food and beverage, oil and gas, and pharmaceutical industries. Front is waterproof, which enables cleaning with high-power water jets. Unit has neither foil nor labels on front so cracks and lines where bacteria and other pathogens might hide are minimized. With alarms, recipes, remote access, and multiple languages, panel helps ensure full control of machines and processes.

Gravograph - New Hermes Inc.    Duluth, GA 30096
May 12, 2010 Gravoply(TM) Laser materials feature matte finish and are designed for use with laser and rotary engraving machines. Allowing precise detail to be engraved, they are available in black, white, red, blue, yellow, and gold and in .05 and .030 in. thicknesses. Brushed or glossy finish is also available as well as adhesive backing. Products meet needs for interior signage, badges, labels, identification plates, and other applications.

Molex Inc.    Lisle, IL 60532-1682
May 12, 2010 Compatible with LED subassemblies across several industries, LED Printed Circuit Assemblies support rigid and flexible circuits used in packaging LED products. Proprietary BIN control ensures consistent lot-by-lot LED luminosity output ranges. Products support backlighting applications with polyester circuits that support lower-power consumption applications as well as heat-sinked polyimide and rigid boards to support high-power consumption applications.

Acromag, Inc.    Wixom, MI 48393 7037
May 12, 2010 Aiding development of measurement/control systems, AMRN/AMRX, for Modbus/RTU, and AMTN/AMTX, for Modbus/TCP, enable interface with Modbus slave device connected to PC's serial or network ports. They include timer for polled DAQ and floating point conversion control. Software tools AMRN/AMTN are .NET controls that communicate with devices linked to PC's serial/Ethernet port. Programs allow device access via test property page and automatically build command, send request, and validate response.

Delcam International Inc.    Windsor Ontario N8W 5J1, CD   Canada
May 12, 2010 To minimize need to transfer data between multiple programs, CopyCAD 2010 offers Tribrid Modeling, which adds triangle modeling to combination of surface and solid modeling. Integration of Parasolid means that CopyCAD can act as reverse engineering front end for all CAD systems based on Parasolid, including SolidWorks, Solid Edge®, and NXTM software. Version 2010 also includes algorithms for surface creation with boundaries or with drive curves, plus methods for inspection of complex parts.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
May 12, 2010 To provide access to real-time data, AMS Machinery Manager v5.4 integrates machinery health diagnostics between protection system, asset management software, and control system. It offers wireless access to spectral/waveform vibration diagnostics and allows data to be imported on demand or at scheduled intervals. Plant assets exceeding vibration thresholds are identified via Overall Vibration Index. Program also supports data from CSI 9420 Wireless Vibration Transmitter.

Agie Charmilles, LLC    Lincolnshire, IL 60069
May 12, 2010 Featuring polymer concrete, cube-shaped base and ribbed, cast iron worktable with axially arranged T-slots, Model HPM 1200 HD provides precision cutting of materials such as alloyed steel and aluminum. Vector controlled inline motor spindle permits full torque at low speed range, while pallet changer allows repetitive machining without interruption. With 60-position tool magazine and double arm gripper, dynamic milling center provides tool changes in 2 seconds.

INDEX Corporation    Noblesville, IN 46060
May 12, 2010 Accommodating simultaneous use of up to 3 tools on 2 spindles, TRAUB TNL18 can be changed over in minutes to produce precision parts with or without guide bush for long/short parts from bar up to 20 mm dia. It delivers precision and qualified surface finish in one operation, and tool capacity can be increased to 54 places via dual- and multi-holders. Also available, TNL18P production machine features Y-axis motion of upper turret mapped by interpolation of X/C/H axes.

IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
May 12, 2010 Installed with any industrial accelerometer, model 682A09 ICP® In-Line Vibration Transmitter converts vibration signal to 4-20 mA velocity output that can be trended with various control room systems. Unit has 2-pin MIL connector input and 3-pin MIL connector output. Operating off of loop-power from PLC, DCS, or SCADA system, it accepts 100 mV/g analog signal, which can be run to central collection point. Unit is suited for operation in harsh environments.