Unipower Corp.    Coral Springs, FL 33065
Apr 20, 2011 Mounted in 19 or 23 in. rack, 1U high DPBF1U Series provides distribution and overload protection for 8 circuits. Unit can support up to 8 single-bus load breakers or 4 dual-bus breakers with capacity of 150 A of load current per bus. Breaker ratings from 1-30 A can be accommodated, and any combination of 12, 24, or 48 V positive or negative ground is available as standard. Breaker trip alarm is indicated by red LED and 2 Form C relay contacts for each bus.

Combi Packaging Systems LLC    Canton, OH 44721
Apr 20, 2011 Designed to handle loads up to 48 x 40 x 87 in., Combi SW-10 is manufactured with manual mechanical core braking film tensioning system that facilitates threading of film. Control panel and photo eye offer soft start and fix stop for precise control. Measuring 65 in. in diameter, chain-driven turntable provides rotational speed of 15 rpm. Belt-driven film carriage, operating on ½ hp motor, accommodates 20 in. roll width and core diameter of 2-3 in.

Macro Sensors    Pennsauken, NJ 08110 1334
Apr 20, 2011 While alternatively available with 0-10 Vdc output, EAZY-CAL(TM) MMX Series Mini-Module LVDT Signal Conditioner with 4-20 mA output supports process control and factory automation applications with extended cable run requirements. Calibration can be accomplished in seconds via 2 front panel pushbuttons. Measuring 2.77 x 3.35 x 0.7 in., single-channel modules support most manufacturers' LVDT position sensors with plug-and-play compatibility and can be remotely located up to 100+ ft.

Mini-Circuits    Brooklyn, NY 11235
Apr 20, 2011 Measuring 3.8 x 3.8 mm, TCBT-14+ wideband Bias-Tee enables engineers to design with DC current up to 200 mA, insertion loss of less than 1 dB, and VSWR of 1.1:1. It covers frequencies from 10 MHz to 10 GHz without resonances typically observed over such a range. Suitable for automated pick and place operation, surface-mount product is designed to handle 1 W of RF power.

Moyno Inc. Unit Of Robbins & Myers, Inc.    Springfield, OH 45501 0960
Apr 20, 2011 Designed for low flow, low pressure applications, Moyno® 2000 WA and WB Pumps have sealed, gear-type universal joint drive train. WA model features standard size/keyed gear reducer shaft and bearings integral to adapter housing that support radial thrust loads at rotor/stator. WB model, featuring traditional close-coupled design with thrust loads supported by bearings in gear reducer, has no shaft bearings. Cross drilled pin holes on gear reducer output shaft extend service life.

BEI Kimco Magnetics    Vista, CA 92081
Apr 20, 2011 Measuring 1.8 in. diameter and 2.1 in. axial length, Model DIH18-21-BBNA provides continuous output of 40 Vdc at speeds of 11,000 rpm. Unit incorporates bearing suspension that absorbs vibration and shock, as well as one-piece housing that eliminates vulnerable attachment points. Motor is used as generator to supply power to remote brake health monitoring system and can withstand high shock and vibration levels in railcar environments.

Sauer-Danfoss    Ames, IA 50010
Apr 20, 2011 Designed to complement H1 axial piston pumps, H1 160 cm³ Bent Axis Motors provide 0°capability, enabling seamless, on-the-go shifting from 32-0°, such as in wheel assist applications. Variable displacement motors are optimized for electrical control and are fully PLUS+(TM) Compliant. To withstand harsh working environments, controls are designed with IP67 and IP69K rating. Typical applications include rough terrain forklifts, combines, sprayers, road rollers, and wheel loaders.

Master Bond, Inc.    Hackensack, NJ 07601
Apr 20, 2011 Formulated with blend of polymeric and inorganic materials, 100% reactive EP30LTE-LO is used for bonding, sealing, casting, and coating applications. This 2-component epoxy exhibits dimensional stability and is serviceable over -60 to +250°F range. CTE is 12x10^-6 in./in./°C, and shrinkage rate is less than 0.0002 in./in. Producing bonds with tensile strength over 5,000 psi, electrically insulative product bonds to metals, glass, ceramics, wood, vulcanized rubbers, and plastics.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Apr 20, 2011 Offering 8% accuracy, Series AVUB operates by measuring heat loss from sensing element in air-stream and calculating air velocity by reading local temperature of air on probe. Models are available in 3 ranges of 0-785 fpm, 0-1,575 fpm, and 0-3,150 fpm with 0-10 Vdc output. Offering 10 sec response time, Series AVUB is suited for wide range of HVAC measurement and control applications, particularly in complete building control and energy management systems.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Apr 20, 2011 Suited for various mobile devices, JSC series connectors feature board-mounted, 2 x 1.8 x 0.5 mm receptacle that mates with 0.81 mm dia RF cable. Mated height of receptacle and cable plug is 1.0 mm maximum. Product withstands up to 30 mating cycles and emits audible click on connecting. Connector and cable structure supports RF performance up to 12 GHz and voltage standing wave ratio of 1.3 GHz up to 3 GHz, 1.4 GHz between 3-6 GHz, 1.5 GHz between 6-9 GHz, and 1.6 GHz between 9-12 GHz.

Nefsis Corporation    San Diego, CA 92123
Apr 20, 2011 With automated bandwidth throttling, CPU balancing, and dynamic video coding, Nefsis Global Cloud enables multipoint HD video conferencing with desktop sharing and advanced collaboration tools over existing business networks. Nefsis meters bandwidth on per connection basis in real-time, adapting as needed to changing network conditions. Administrative controls allow IT staff to set system-wide and per-user limits, overriding any user selections or automated video quality improvements.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Apr 20, 2011 Available to open source Linux community, OpenLink(TM) Wi-Fi® and Bluetooth® technology drivers help developers targeting battery-powered Wi-Fi products by providing mobile-grade, battery-optimized Wi-Fi solutions with native kernel benefits. Drivers support suspend/resume, runtime power management, and wake-on-wireless. Whether working with Android, MeeGo, or other Linux-based distributions, developers can access code natively as part of their kernel builds.

Nordson Corporation    Amherst, OH 44001
Apr 20, 2011 Designed for manufacturing high density interconnect, flex, and rigid panels, ProVIA(TM) requires minimal floor space. Vacuum system, plasma chamber, control electronics, and 40 kHz power supply are housed in single enclosure. Full front and rear access allows for service to all interior components, and no side access is required. Pump is positioned on rollers to facilitate removal.

AXIOMTEK    Taipei   Taiwan
Apr 20, 2011 Suited for space-limited and thermally constrained embedded applications, Model SHB212 is available with Intel® Atom(TM) 1.8 GHz D525 dual core processor, 1.80 GHz D425 single core processor, or 1.66 GHz N455 single core processor. One DDR3 667/800 MHz SO-DIMM supports up to 4 GB system memory. Dual-display support is provided through VGA port and 18-bit single channel LVDS interface. Requiring 12 Vdc power input, card includes 6 USB 2.0 ports, 2 Gigabit LANs, and 2 COM ports.

Raritan Computer, Inc.    Somerset, NJ 08873
Apr 20, 2011 Designed as zero-U, one-port solution, Dominion® KX II-101 V2 provides non-blocking BIOS-level access and control of single server via dedicated IP address. Palm-sized KVM device includes Absolute Mouse Synchronization(TM) and Virtual Media for transferring files and installing patches and upgrades over IP. For shared troubleshooting or collaboration, unit enables up to 8 remote users to simultaneously view same server. Remote power management is provided when used with Dominion PX intelligent PDU.

Enfield Technologies, LLC    Trumbull, CT 06611
Apr 20, 2011 D1 PWM Valve Driver converts proportional command voltage into a -1.1-1.1 A current signal to drive valve's linear force motor. Valve deadband, dither amplitude, and maximum current are all adjustable. Digital closed loop current control compensates for perturbations such as change in input voltage and change in coil resistance due to temperature. Other features include short circuit protection and LED indicators for power and status/fault activity. Temperature range is -40 to 150°F.

BioFortis, Inc    Columbia, MD 21044
Apr 20, 2011 Qiagram is collaborative visual data exploration tool that lets users access, manage, explore, and retrieve relevant information in data-intensive environments. Suited for use with large and complex datasets, it allows users to pose questions by drawing diagrams in Web-browser interface. Software lets IT users import, inspect, standardize, and clean raw data in centralized environment, and also offers multiple interface options to enterprise data systems and resources.

Rohde & Schwarz GmbH & Co      Germany
Apr 20, 2011 Used for in-depth, offline analysis of media files on PC, R&S Vega Suite helps broadcast operators and service providers find signal faults and optimize content. Manufacturers of DTV components can check their products' standards compliance and perform QA testing. Suited for analyzing compressed audio and video signals, MXF files, and MPEG-2 transport streams, suite offers visualization options that facilitate analysis and save function that aids results documentation.

SABIC Innovative Plastics    Pittsfield, MA 01201
Apr 20, 2011 Providing dimensional stability for thin-wall molding, Extem UH 1019 achieves continuous use temperature rating of 260°C according to UL 746B. Resin uses high-yield injection molding and extrusion processes and can be recycled. Inherently flame retardant without use of halogenated additives, Extem UH 1019 is suited for wire and cable insulation, high performance connectors, semicon plasma chamber components, high heat film, bearing cages, gears, membranes, and composites.

Tiffen Co. LLC, The    Hauppauge, NY 11788
Apr 20, 2011 With beam angle of 50°, LED Studio 450 Series delivers output of 185 footcandles at 6 ft and 86 footcandles at 9 ft. Units have tungsten color output of 3,200 K and Color Rendering Index of 91+. DMX jacks allow connection and communication with DMX-512 control systems. Available in hanging clamp or stand mount versions, fanless fixtures auto-set to AC voltages from 90-250 V.