Pharmspective, LLC    St. Louis, MO 63141
Mar 15, 2012 Offered as PC- and iPad-compatible web app, ClearView(TM) lets users analyze provisions in health care reform law and their impact on key pharma customer decision makers who influence product adoption. Subscription database houses 400+ key provisions of health care reform legislation, and interactive platform will help subscribers assess impact of key provisions by providing up-to-date perspectives from regularly updated published opinions and third-party points of view.

Tectrol Inc.    Toronto, ON M3J3E5
Mar 15, 2012 Housed in 25 W/in.³ high density package measuring 11 x 4 x 1.6 in., TFE-1800 Series delivers 1,800 W of 48 V power with 3.3 VSB at 1 A. Up to 4 units can be paralleled, in mating 1U high 19 in. rack mount enclosure, providing up to 7.2 kW of output power. Supply features Universal AC input with active PFC, typical efficiency of 90%, digital I2C interface, and analog status/control functions. Secondary isolation is provided for Power-over-Ethernet and VoIP applications.

Xylem Inc.    White Plains, NY 10604
Mar 15, 2012 Offering 12 and 24 V models, industrial motor-driven Flojet® LF Plus series uses reciprocating diaphragm technology and performs in harsh environments. Design reduces diaphragm cleaning time, and 360° quick connect swivel ports allow complete freedom of port orientation. Weighing 20 oz, pump supports operating pressures to 40 psi, offers self-priming capabilities up to 6 ft, and offer 1.0 gpm flow rate. Additional features moderate pressures from 0.2-0.3 gpm for backpack spraying.

North Atlantic Industries, Inc.    Bohemia, NY 11716
Mar 15, 2012 Combining Magellan MC58000 Series Processor with customer programmable FPGA, DSP, and analog functions, M* Module provides programmable control of DC brush, brushless DC, and step motors using both pulse and direction and microstepping output formats. Module incorporates 12-channel A/Ds with 10-channel synchronized/simultaneous FIFO data buffer and triggering option, as well as integrated I/O for motor limits, home, fault, and motor enable sense/control.

Kelley Company    Carrollton, TX 75006
Mar 14, 2012 With iFAN(TM) System, facilities can network High Volume Low Speed fans and control them from centralized location. Fans are networked to 23 in. touchscreen computer, complete with custom graphics representing exact fan layout. System can also display tailored variety of performance metrics for each fan, by zone, or for entire facility, which can be archived and viewed later for trend analysis. If fire suppression sprinklers are triggered, Fire Control Panel initiates instant shut down of all fans.

Burr Oak Tool    Sturgis, MI 49091
Mar 14, 2012 Designed to handle tubes up to 3/8 in., SD-VBHB Small Diameter Vertical Bend Hairpin Bender is suited for air conditioning/refrigeration applications. Maintenance time is minimized with servo hitch feed, which eliminates belt feed used on previous designs. Machine also include intuitive operator interface with touchscreen, and independent tube clamping for variations in tube diameters that do not cause clamp marks on hairpins.

Kontron Modular Computers GmbH      Germany
Mar 14, 2012 Offering optimized performance on MicroTCA integrated platforms and as daughter compute-intensive module board in ATCA platforms, AM4150 comes with 2.2 GHz Freescale QorIQ P5020 CPU with 2 cores based on e5500 Power Architecture. High-speed frame managers and multiple high-speed connections, such as Serial Rapid IO (1.3/2.1) and PCIe, accommodate demanding processing requirements. To support max throughput and low latency, board provides dual-channel memory up to 8 GB ECC DDR3 RAM.

Keyence Corporation of America    Itasca, IL 60143
Mar 14, 2012 Combining functionality from machine vision and traditional sensors into one system, IV Vision Sensor accommodates range of presence detection applications. Standard equipment - Hi-R illumination, high-performance quad lens, and selection of 8 different sensor heads - provide image sharpness, clarity, and stability, while Easy Navigation feature enables setup to be accomplished in ~1 min. Supplied in IP67 enclosure, sensor also offers automatic focus and one-touch brightness adjustment.

RMT Robotics Ltd.    Grimsby, ON L3M4E8
Mar 14, 2012 ADAM (Autonomous Delivery and Manipulation) mobile robot operates safety due to interactive voice messages and vehicle-in-motion jukebox capabilities of ADAM RAP (Reactive Audio Playback). To promote interaction between workers and robots, programmable sound system application plays various sound bites or text-to-speech audio based on particular function robot is undertaking. It meets requirements of vehicle in motion alert systems is mandated by international safety standards.

FUJIFILM Optical Devices U.S.A., Inc.,    Wayne, NJ 07470
Mar 14, 2012 Designed for precision performance, HA19x7.4BERM/BERD 2/3 in. Premier Series high-performance HD ENG/EFP production lens and XA19x7.4BESM-D8 compact, HDTV studio and field box-style lens feature EBC coating for optimal color richness, blue response, and transmittance. Also, 3 floating zoom groups and Aspherics combine to optimize optical performance. Mini-box lens offers automatic compensation of focus breathing, and 3.3 kg ENG/EFP lens is offered with manual or servo focus and zoom.

T-VIPS America Inc    Millburn, NJ 07041
Mar 14, 2012 Supporting regional adaption in DVB-T/T2 Single Frequency Networks, CP330 T2 Bridge enables distribution of signals to digital terrestrial transmitters using satellite or hybrid infrastructures. Deterministic remultiplexing creates identical signals at all transmitter sites in same region, while support for Multiple Physical Layer Pipes enables adaptation through PLP replacement in region - an alternative approach for complying with SFN requirements.

Dri-Air Industries, Inc.    East Windsor, CT 06088
Mar 14, 2012 By eliminating mixing chamber, PDII Dryer yields accurate ratio from shot-to-shot basis. Both feeders are mounted on load cells to monitor and record amount of each material used. In use, feeder is automatically filled to preset amount by opening gate under drying hopper. Actual amount of material in feeder is recorded and compared to amount left in feeder after dispensing into common conveying stream. Ratios can be programmed into touchscreen from 1-50% for processing colorant or regrind.

Alstom Power Inc., Air Preheater Co., Raymond Operations    Lisle, IL 60532
Mar 14, 2012 Used for production of powders used in fillers, coatings, and pigments, Raymond® Ultra Fine Mill offers flexibility to deliver powders as fine as 50% passing 2 microns or as coarse as 50% passing 10 microns. Shaft rotates convex rolls inside concave grinding rings to reduce materials in multi-stage process, and air flowing within mill carries ground material through classification process to achieve desired fineness. Grinding elements can be adapted to meet product size specifications.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Mar 14, 2012 Designed for use with stand-alone CT3 Texture Analyzer that operates in compression and tension modes, TA-DGA Dual Grip Accessory enables tensile breaking strength testing for packaging materials and package seals. Lower and upper grip assemblies secure test strip of material being evaluated, and variety of standard probes are available for diverse applications. Offering range of test modes, Texture Pro Software lets technician generate analytical data.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 14, 2012 Sensor cables and connectors are available with choice of M12 male or female, straight or 90° connectors for Profibus. UL recognized, connectors come in field wireable or panel connector styles. All connectors are gold plated, and cordsets are available with straight male-to-male or female-to-female connectors. Industrial-standard violet jacket cable can be order to any custom length.

Aven, Inc.    Ann Arbor, MI 48108
Mar 14, 2012 Made of 400 series stainless steel, Adjustable Wrenches come in 6, 8, 10, and 12 in. sizes, with or without PVC grips. Units lock into position when user applies pressure, assuring knurls will not loosen and jaws will not slip. Hardened steel can be autoclaved and tolerates caustic cleaning solutions. Minimizing ferrous contamination risk, tools are suitable for maintenance in health care, food processing, pharmaceutical labs, marine applications, and chemical production.

Aremco Products, Inc.    Valley Cottage, NY 10989
Mar 14, 2012 Intended for masking high-velocity oxy-fuel thermal and plasma spray operations, Pyro-Tape 682-PM tri-layer silicone rubber, aluminum foil, and fiberglass tape has operating range of -100 to +500°F, tensile strength of 130 psi, and cross-sectional thickness of 0.019 in. Tape material is combined with silicone adhesive that provides adhesive strength of 40 oz/in. While standard sizes are ½ and 1 in. wide x 36 yd, custom widths are available.

International Crystal Laboratories    Garfield, NJ 07026
Mar 14, 2012 Able to be heated to 200°C, Variable Path Length Cell features programmable ramp and soak temperature controller with RS-232 serial cable computer interface. Cell back plate is water-cooled and body is insulated as is vernier scale adjustment on front of cell. Path length may be continuously adjusted from 0.05-5 mm and reproduced within 0.001 mm. In addition, cell may be adjusted to provide precise intensity for exact location of both weak and strong bands.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 14, 2012 Featuring capacitance range from 1-70 µF and voltage ratings up to 350 V, Model MKP1847 is optimized for AC filtering in UPS systems, power supplies, inverter grid interface, and welding equipment. Device provides capacitance tolerance down to ±5%, low self inductance of less than 1 nH/mm of lead spacing, peak current capabilities up to 750 A, and RMS current up to 32 A. Offered in flame-retardant plastic case with resin seal, RoHS-compliant capacitor operates to +105°C.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 14, 2012 Offered in 0805 and 1206 case sizes, D..EN802 and CRCW....EN802 devices come in 2 versions: approved to EN 140401-802, Version A, and approved to EN 140401-802, Version E. RoHS-compliant CRCW....EN802 features pure tin termination plating on nickel barrier, while D..EN802 has SnPb termination plating on nickel barrier and min lead content of 10%. Values include TCR of ±200, ±100, and ±50 ppm/K; resistance range of 1 W to 1 MW, and resistance tolerances of ±5% and ±1%.