Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jun 03, 2010 Model TLK6002 enables continuous data rate support from 470 Mbps up to 6.25 Gbps for wireless applications. Using single 122.88 or 153.6 MHz fixed reference clock frequency, IC can support Common Public Radio Interface (CPRI(TM)) and Open Base Station Architecture Initiative (OBSAI) rates, and automatically self-tunes to each. It has 20-bit parallel single-ended interface that connects to FPGAs. Receiver equalization and transceiver pre-emphasis enable trace reach of over 50 cm.

Vectron International    Hudson, NH 03051
Jun 03, 2010 Utilizing Ultra Low Noise fifth overtone SC-cut crystal, 10 MHz Model OX-045 features close-in phase noise of -140 dBc/Hz at 10 Hz offset and noise floor of -163 dBc/Hz. Oven controlled crystal oscillator provides yearly aging of 10 ppb/year and temperature stability of ±3 ppb from 0-70°C. Applications include phase noise test sets, signal generators, and spectrum analyzers.

Eltek Limited    Cambridge   United Kingdom
Jun 03, 2010 Able to receive information from sensors relayed via Eltek transmitter unit over distances up to 2,000 m, WSR (Wireless Sensor Receiver) converts incoming data into voltage signals that are then fed directly to DAQ or process control system. Self-contained, mains-powered receiver and output unit, available with 8 or 16 I/O, incorporates LCD that shows real-time metering of sensor values. Built-in batteries provide 48 hr of operation in case of mains failure.

Cito Systems    Santa Clara, CA 95054
Jun 03, 2010 AMCS® (Advanced Motion Control Server) is designed for controlling brush and brushless DC servo motors as well as stepper and microstepping motors actuating any mechanism. Also functioning independently through its own system software, server offers network communication, including Internet, and can be accessed via HTML GUI or client applications. Devices incorporating AMCS can be controlled and monitored through worldwide computer network.

Strongarm Designs, Inc.    Horsham, PA 19044
Jun 03, 2010 Available in 37, 42, or 57 in. sizes, large-screen LCD enclosure systems offer safe solutions for overhead control room and plant floor displays in any industrial environment. Completely assembled and tested systems, supplied in NEMA 4X stainless steel or NEMA 4/12 carbon steel housings, present graphics and information to improve plant floor processes. Other configuration options include sloped top for washdown environments, front or rear access doors, and various mounting options.

Strongarm Designs, Inc.    Horsham, PA 19044
Jun 03, 2010 Available on Suite-Station, Aseptic Display eliminates ledge associated with traditional panel-mount displays, creating smooth, crevice-free exterior surface that helps prevent particle accumulation and provides wipe-down cleanability. Unit is available in 15.1, 17.1, 19.1, and 21.3 in. sizes, and can be configured with Infrared, Resistive, and SAW touchscreen technologies.

Accutek Testing Laboratory    Cincinnati, OH 45246
Jun 03, 2010 As 4-in-1 electromechanical static/dynamic medical device testing machine, ProAgility MC4 offers prewritten programs for ASTM static/dynamic tests and streamlined UI that minimizes input requirements. Axial static and dynamic tension-compression are respectively rated to ±5 and ±3 kN, and axial stroke is 0-150 mm. Torsion specifications include ±100 N-m static torsion, infinite torsional travel, and ±10 N-m dynamic torsion. Axial and torsion dynamic test frequencies range from 0-30 Hz.

Monadnock Paper Mills, Inc.    Bennington, NH 03442
Jun 03, 2010 Manufactured with 100% post-consumer recycled content, Monadnock Envi(TM) PC 100 carries Forest Stewardship Council certification; SW-COC-001160. Label features wet-strength chemistry that allows it to withstand rigors of supply chain, from bottling plant to tableside wine chiller. Available in sheets or rolls, bright white label stock prints crisply and accepts deep, multi-level die embossing and foil stamping.

Hirose Electric (USA) Inc.    Simi Valley, CA 93065 6235
Jun 02, 2010 With 18 contacts, 3800 Series rugged board mounting cable connector features sequenced contact structure, with 1st and 18th contacts being first make/last break, and they are also offset 0.5 mm. Locking system ensures reliable retention force once it is mated, and connector incorporates heavy gauge metal shell and can withstand 20,000 mating cycles. Connector body measures 22.3 x 8.5 mm, with board-mounted profile of 5.0 mm and weight of 1.39 g.

General Tools & Instruments    New York, NY 10013
Jun 02, 2010 Designed to obtain accurate temperatures instantaneously without contacting object being measured, IRT206 Heat Seeker(TM) works by capturing and measuring invisible IR energy naturally emitted from all objects. Unit includes backlit LCD and switchable on/off laser pointer for target location. With distance-to-spot ratio of 8:1, temperature gun is suitable for energy auditing, scanning walls and ceilings for insulation deficiencies, and determining radiator heating efficiencies.

General Tools & Instruments    New York, NY 10013
Jun 02, 2010 Suitable for maintaining any air-conditioning or cooling system that utilizes compressor or refrigerant, Model RLD382P has internal pump that pulls gases through microprocessor-controlled sensor. Sensor utilizes digital signal processing, which is sensitive to full variety of halogenated refrigerants. In addition to Automatic Ambient Reset function and High-Low Leak Sensitivity Selector, handheld detector includes audible alert and multi-color visual display to indicate adverse conditions.

Ci Design Co., Inc.    Irvine, CA 92618
Jun 02, 2010 Available in 2 models, 3.5 in. Tower 4 Bay is intended for video editors and configures with any video editing program such as Final Cut Pro, AVID, and Adobe Premier, as well as any other graphic arts program. MiniSAS model provides 8 TB capacity and data transfer of 300 MBps. Designed for extreme data protection with RAID 5, Tower 4 Bay UFER model has 2 FireWire 800 ports, 1 USB, and eSATA port. With eSATA port, UFER model offers 200 MBps data transfer.

Richardson Electronics, Ltd.    La Fox, IL 60147
Jun 02, 2010 With each cell operating at 2.7 V, K2 Series BOOSTCAP® ultracapacitors are intended for applications that require burst power and heavy cycling which cannot be efficiently provided by battery or power supply alone. Cells range from 650-3,000 F and provide source of back-up and pulse power, ensuring critical system functions remain available during dips, sags, and outages. Individual and multi-cell modules are available with working voltage from 16-125 V.

Ampac Flexibles    Cary, IL 60013
Jun 02, 2010 Able to be used in high-speed form/fill/seal machines, Flexi-Free® HS laminates have heat seal temperature that enables shortened dwell times, increased machine speed, and accommodation of heat-sensitive products. Product can be applied to various types of laminations, such as metalized PET, foil, and clear film. Other application possibilities include Ampac Child Resistant CR line, stick pack application films, and pharmaceutical overwraps.

STMicroelectronics    Lexington, MA 02421
Jun 02, 2010 Single-chip BAL-2593D5U and BAL2690-D3U are used to convert antenna signal to balanced pair of signals as required by Bluetooth transceiver. BAL-2593D5U is optimized for use with STLC2500D Bluetooth transceiver and STLC2592/3 combo devices, and offers 50/50+j50 W impedance and 1.2 dB insertion loss. Providing 50/30+j25 W impedance and 0.8dB insertion loss, BAL2690-D3U is designed for STLC2690 Bluetooth/FM-tuner combo with short-range FM transmitter.

Critical Environment Technologies Canada Inc.    Delta V4G 1M3  Canada
Jun 02, 2010 Housed in ABS enclosure, PET Parkade Emissions Transmitter is available with variety of electrochemical sensors, including carbon monoxide, nitrogen dioxide, and sulphur dioxide. Featuring thermal resetting fuse and tricolor LED indicator for power and alarm, transmitter communicates via BACnet protocol SMTP signaling. Unit is available with optional 4-digit LED display and is suited for non-hazardous vehicle exhaust environments, commercial HVAC, and light industrial applications.

Logic Supply    South Burlington, VT 05403
Jun 02, 2010 Powered by Intel® Atom(TM) or Core(TM) 2 Duo processor, SL1UR Rackmount system supports full customization. Type of I/O, level of cooling, PCI expansion, extra storage, surface mounting, and power source can all be configured to meet unique application requirements. Case may also be fitted with automotive power supply and solid state drive and accommodates range of Mini-ITX mainboards as well. Multiple networking ports, legacy I/O, and HD A/V outputs are available.

PREMO Group    Barcelona   Spain
Jun 02, 2010 Measuring 8.5 mm high, 35 A, CS-100-AU features high-temperature-stability toroidal ferrite core that allows 200 kHz working frequencies at -40 to +155ºC operating temperatures. Unit is suited for hybrid and electric vehicles and works at 400 V in input site. It guarantees 3 kV isolation and creepage distance of greater than 6.5 mm, and also has typical DCR of 0.5 mW. Primary DC resistance is 0.5 mW and secondary DC resistance is 0.8 W, with primary to secondary capacitance of less than 7 pF.

KoamTac, Inc.    Princeton, NJ 08540
Jun 02, 2010 Measuring less than 2 in.³, KDCi Scanners enable enterprises to add professional barcode scanning to mobile workers' handset of choice. KDC200i integrates laser scan engine for reading linear barcodes, while KDC300i utilizes Adaptus® Imaging technology from Honeywell, enabling omnidirectional reading of linear and 2D barcodes, postal codes, and optional OCR codes. On fully charged battery, both models can scan and transfer barcodes for several days with Bluetooth connection enabled.

CRAIC Technologies Inc.    San Dimas, CA 91773
Jun 02, 2010 Designed to non-destructively analyze films of many materials on both transparent and opaque substrates, 20/20 Film(TM) enables user to determine thin film thickness on products such as semiconductors, MEMS devices, hard disk drives, and flat panel displays. Sampling areas can range from over 100 microns across to less than 1 micron. Designed for production environment, system incorporates modifiable processing recipes, ability to create new film recipes, and tools for analyzing data.