Northfield Precision Instrument Corp.    Island Park, NY 11558
May 19, 2011 Measuring 6 in. dia, Model DPH-600W employs special jaws and stop to grip plasma welding nozzle. Stop has six .040 in. dia air detect holes for part seating confirmation, and chuck is counterbalanced to maintain exact jaw for up to 6,500 rpm. Along with respective radial and axial accuracies of 0.000020 and 0.000010 in. TIR, product offers max speed of 10,000 rpm, standard chucking range of 0-4.8 in., and 0.060 in. jaw stroke with pull-down action (1.5 in. top jaws).

Sherwin-Williams    Cleveland, OH 44115
May 19, 2011 Designed to prevent yellowing and gloss reduction from UV light, EnviroLastic AL offers elastomeric performance by bridging gaps up to 1/8 in. Combination of weatherability, crack bridging capability, and adhesion properties make USDA-approved, seamless coating system suitable for interior/exterior walls and ceilings as well as exterior tanks and silos. Applied at thicknesses of 30-250 mils, low-odor, zero-VOC, 100% solids coating offers 3 min tack-free time and 24 hr full cure.

Dassault Systemes    Suresnes Cedex BP 310, 92156  France
May 19, 2011 Supporting CUDA-based GPU acceleration, Abaqus v6.11 provides scalable, realistic simulation capabilities for exploring real-world physical behavior of products and materials. Abaqus Topology Optimization Module (ATOM) add-on lets users perform topology and shape optimization for single parts and assemblies while taking into account large deformation, material nonlinearity, and contact. Suite also provides coupled multiphysics and high performance computing (HPC) technology support.

Clean Harbors Environmental Services, Inc.    Norwell, MA 02061
May 19, 2011 Leveraging knowledge of federal, state, and local regulations, service properly disposes of patient-on-admission MRSA (Methicillin-resistant Staphylococcus aureus) testing devices for hospitals, research laboratories, public health clinics, and physician offices. Full regulatory compliance consulting and outsourcing service includes tracking and documentation as well as certificates of disposal to ensure proper handling and reduce liability.

Mettler Toledo, Inc.    Columbus, OH 43240
May 19, 2011 Requiring minimal or no training, OptiMax(TM) fosters pharmaceutical, fine-chemical, and specialty-chemical development. Design and interface optimize organic synthesis process and time-to-result. Experiments can be run from -40 to +180°C, without oil or ice baths or cryostats, while careful tracking produces quality data. Offering one platform for product and process development, system delivers data recording and reporting capabilities that contribute to traceability and reproducibility.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 19, 2011 Equipped with 4 channels, Model 7199 allows each channel to share 2 BNC networks from 1 common BNC network or device. Switch also includes DP9 remote port for RS485 multi-drop applications. With Model 7199, 4 independent channels can be switched individually or simultaneously via RS485 commands. Rackmount unit with anodized black box packaging also provides EMI/RFI shielding. For added security, switch has no front panel pushbuttons and can only be controlled remotely.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
May 18, 2011 Optima MAX-XP Tabletop Ultracentrifuge integrates MLA-50 High-Capacity Rotor with 194 mL capacity that maximizes number of samples that can be processed per run. Aluminum rotor also accepts g-Max tubes to adapt small samples with no impact on G-force generated by it, as well as wide-neck OptiSeal tubes or Quick-Seal tubes. Centrifuge's customizable interface supports multiple users and offers context-sensitive on-board help, while 9 native languages are available via menu selection.

AAEON Technology Inc    Taipei   Taiwan
May 18, 2011 Powered by Intel® Atom(TM) CPU, ETX-LN features ICH8M I/O Controller Hub and one 204-pin SODIMM socket that supports up to 2 GB DDR3 system memory. Communication is supported via one 10/100Base-TX Ethernet interface, and I/O connectivity features include one parallel, 2 RS-232, and 4 USB 2.0 ports. For storage, there are 2 SATA 3.0 Gbps ports and optional onboard SSD up to 16 GB. Both LVDS and analog video output are offered in simultaneous and dual display modes.

Acrosser Technology    Cypress, CA 90630
May 18, 2011 Equipped with Vortex86DX 800 MHz SoC and 256 MB DDRII memory, Model AR-B8172 is suited for industrial automation and factory instrument applications. Unit includes CF socket and IDE interface for storage, as well as VGA output, 2 serial ports, 10/100 LAN, and 4 USB 2.0 ports. Measuring 7.29 x 4.81 in., Model AR-B8172 operates from 32-140°F with 12 V single voltage input. Board supports Linux, Windows XP, and DOS.

Pepperl + Fuchs, Inc.    Twinsburg,, OH 44087 2245
May 18, 2011 Supplied in metal housing immune to acids and alkalis, MLV41-8-HV delivers web-break detection for colored papers, reflective/glossy materials, adhesive films, and packaging media. Optics identify paper dust build-up, mounting tolerances accommodate imperfect sensor and paper alignment, and foreground and background suppression ensure optimal detection of web breaks. Also, 4-in-1 output, allows sensor to automatically detect connected load and select appropriate output type.

Lutze, Inc.    Charlotte, NC 28273
May 18, 2011 Due to extra thick XLPE insulation, DRIVEFLEX(TM) offers 1,000 V VFD 90°C rating per UL as well TC-ER and WTTC approvals. XLPE insulation is thermo-set material with elevated voltage breakdown level, inherently addressing corona discharge effect and making it suited for any type of motor and drive application. Along with design that facilitates stripping and installation, cable features foil and braid shield combination with drain wire that ensures compliance with EMC requirements.

Eaton Corporation    Raleigh, NC 27615
May 18, 2011 Suited for transit buses, motor coaches, trains, and large overhead cranes, Aeroquip EverCool(TM) A/C Hose is available in sizes 12, 16, 20, and 24 with max operating pressure of 500 psi and minimum bend radius of 2.5, 3.0, 4.0, and 5.0 in., respectively. Hose features EPDM cover, butyl tube with barrier layer, one wire, and synthetic braid reinforcement. Screw-together fitting uses elastomer on hose nipple for leak assurance at hose/fitting connection.

Edwards High Vacuum Int'l    Crawley East Susse RH10 9LW  United Kingdom
May 18, 2011 Designed to thermally decompose liquid diethyl zinc used in depositing some transparent conductive oxide films in thin film solar manufacturing, Hot Trap extends pump maintenance intervals from 1 week up to 6 months. Gases leaving process chamber pass through hot trap before entering vacuum pump. Heated to temperature that optimizes DEZ decomposition, trap's cartridges only require replacement on monthly basis, and can be cleaned and reused.

Logic Supply    South Burlington, VT 05403
May 18, 2011 Available with Intel® Celeron(TM) and Intel® Core(TM) i5/i7 processors supported by Intel QM57 chipset, Extended Temperature AU912 provides up to 4 RS-232 COM ports, DisplayPort, Digital I/O, dual Gb LAN, and PCIe x16 and x1 expansion below board. Front panel slot provides access to SIM card and CFast slot for embedded operating system installation and hot-swappable storage. Operating from -20 to +55°C, AU912 resists shock and vibration, and withstands damage from grease, dust, or dirt exposure.

BlueLevel Technologies, Inc.    Rock Falls, IL 61071
May 18, 2011 Used in inventory measurement applications of powder, granular, and liquid materials, Model WC incorporates Hall-effect sensing techniques and provides reliable operation through intelligent control of weight/cable system and self-validation of sensing function. Functionality enables flexible adaptation to application, and multiple outputs, universal AC power supply, flange options, and various sensing weights promote application versatility.

Peripheral Manufacturing, Inc.    Denver, CO 80239
May 18, 2011 Fully functional over its 10-year service life, Aero-K® heat-sensitive thermal unit activates upon detection of fire. Generators produce ultra-fine, potassium-based aerosol spray to extinguish fire without depleting oxygen. Also able to be activated manually or automatically from compatible releasing device, non-electrical unit has response time, environmentally friendly formulation, and concentration levels that allow use in diverse industries.

Michelman Inc.    Cincinnati, OH 45236
May 18, 2011 Designed for use as fiber sizing in fiber reinforced nylon composites, solvent- and VOC-free Hydrosize® PA845 is fully compliant with EC Directives on plastics for food applications. Product is engineered for optimal processability, film forming, and strand integrity properties. Also free from alkylphenol ethoxylate (APE), dispersion provides alternative to Hydrosize polyurethane fiber sizings for nylon composites in applications where greater thermal stability is required.

K&H Industries, Inc.    Hamburg, NY 14075
May 18, 2011 Featuring dual lampheads that can be positioned 330° in both horizontal and vertical planes via hard-wired or wireless remote controller, vehicle-mounted StarBeam SB-101T-LT433 generates total output of 1,200,000 cp. Made with marine quality materials that are chemical and saltwater resistant, unit has hard-coated anodized drive shafts, brushless connections, and lubrication-free drive system. Housing and base are completely enclosed and are weather-resistant.

H2W Technologies, Inc.    Santa Clarita, CA 91350
May 18, 2011 Single-axis linear stepper stages have integrated linear encoder that enables stepper motor to operate as 2-phase brushless linear motor when coupled with motion control electronics package. Stage includes cable carrier, and provisions let customer cables be routed within carrier. Stepper motor forcer and platen, 1-micron resolution linear encoder, bearings, switch for home position, and optional end-of-travel-limits are integrated into same package.

E Instruments International LLC    Langhorne, PA 19047
May 18, 2011 Suited for medium temperature calibration, Black Body BBSM features temperature range of 20-600°C with 0.1°C resolution, accuracy of ±0.5°C, and ±0.5°C stability. Emissivity ranges from 0.97-0.98. Consuming 750 W, portable non-contact IR pyrometer calibrator offers stabilization time of 20 minutes and heating time of 45 minutes. Calibration is traceable to National Standards within ±2°C.