Phoenix Contact
Harrisburg, PA 17111 0100
Aug 04, 2008 Including 24 Vdc power supply, UPS system, surge protection, and antenna adapter, RAD-SYS-NEMA4X-900 enclosure simplifies installation of industrial wireless radio modems and small RTU devices. Power supply with backup prevents failure of critical operations due to power dips and brown-outs, while surge arrestor protects against lightning and surges. Dual latching lockable lid prevents unauthorized access, and pre-wired power rail has space for Trusted Wireless or GSM/GPRS radio modem.

Crystek Corporation
Ft. Myers, FL 33913
Aug 04, 2008 Housed in 1.25 x 1.25 x 0.59 in. aluminum enclosure with 3 SMA connectors, Model CRBAMP-100-6000 RedBox is low-noise general purpose connectorized amplifier featuring signal gain of 18 dB with output power of 17 dBm (P1dB). It also features typical noise figure of 3.5 dB with IP3 of +30 dBm. Suited for IF or RF buffer amplifiers, base stations, high-reliability applications, and general lab use, unit operates from single +5 V supply consuming only 60 mA.

PennEngineering
Danboro, PA 18916-1000
Aug 04, 2008 Incorporating MAThread® anti cross-threading captive screw technology, PEM® floating access fasteners compensate for up to .060 in. mating thread misalignment. Type PF11MW with knurled cap meets operator access area requirements similar to UL 508, while PF12MW with smooth cap meets service access area requirements similar to UL 1950. With #4-40 to ¼-20 and M3 to M6 thread sizes, they suit close centerline-to-edge applications and can be installed on painted surfaces without marring.

Madison Company
Branford, CT 06405
Aug 04, 2008 Constructed from high-strength stainless steel, models MAD4500 and MAD4510 are approved to UL/cUL913 (CSA 157) Class I Div 1, Groups C, and D for use in intrinsically safe areas with approved barrier. They utilize diaphragm technology and solid state design that provide high accuracy in various vessel configurations with liquid pressure up to 100 psig. Compatible with range of liquids, units are suitable for ground water level depth measurement and earthen and concrete dams.

Technifor, Inc.
Charlotte, NC 28273
Aug 04, 2008 Able to mark metallic and plastic parts of various shapes and sizes, XF510Cp incorporates backward and forward movement to mark parts. Featuring RS232, USB, Ethernet connections, and 8 Input/4 Output card, unit has 5 lb marking head that measures 5.4 x 3.4 x 4.5 in. It has optimized 50 x 20 mm marking area with character height of 0.5-49.5 mm, and can be programmed for fixed texts, variables, linear, angular, radial marking with high memory capacity of up to 1,000 marking files.

CINTEC America Inc.
Washington, DC 20015
Aug 04, 2008 CINTEC Design Anchor System stabilizes and strengthens terra cotta structure. Main steel body of anchor is surrounded by fabric sock. Anchor is placed in oversized drill hole joining materials to be anchored together, fluid grout is injected under pressure through middle of anchor. When it reaches remote end, it passes through flood holes into fabric sock, inflating assembly. System has 2-hr plus fire rating and can be installed to be invisible.

ARI-Armaturen
Stukenbrock   United Kingdom
Aug 04, 2008 CONA All-in-One solution integrates steam trap, isolation valves, strainer, check valve and blowdown valve and requires just two pipe connections. Multi-valve system performs functions such as isolation, safety, control and steam trapping, and suits industrial applications including main line draining, steam distributing and tracing systems, as well as process industry.

REGO-FIX Tool Corp.
Indianapolis, IN 46268
Aug 04, 2008 Comprised of toolholder and collet, powRgrip® PG 32 uses mechanical properties of holder material to generate gripping force with run-out below 0.0001 in. Available in metric and inch diameters up to 25 mm and 1 in., respectively, system is suited for high speed machining applications, and offers range of taper selection, including CAT, BT, HSK and TC versions. It takes less than 10 sec to press in any tool or remove it from holder.

White Hydraulics, Inc.
Hopkinsville, KY 42241 1127
Aug 04, 2008 Intended for medium duty mobile and industrial applications, WP Series hydraulic motors feature flow rates up to 16 gpm, torque to 4,320 lb-in., and pressures up to 2,320 psi at continuous ratings. Units have 3-zone spool valve design, high pressure shaft seal, and check valves. Twelve displacements are available ranging from 1.5-243.7 in³/revolution, along with 10 shaft options, 3 mounting options, and variety of porting options to meet SAE and European requirements.

Cleaver-Brooks
Milwaukee, WI 53201
Aug 04, 2008 Optimized Boiler Package includes 250-800 hp boiler that burns either natural gas or #2 oil, integral burner, 2-stage condensing economizer, Level Master, and Hawk ICS control system with parallel positioning. It also features deaerator that prevents corrosion of boiler surfaces, steam supply piping, and condensate return lines, combustion air fan which allows a motor to operate only at its required speed, and trim system that continuously senses oxygen content.

Dynapar
Gurnee, IL 60031
Aug 04, 2008 With low profile that enables mounting onto stepper and servo motors, M53 modular commutation encoder has direct-read phased array ASIC that provides 2,500 ppr. It comes with commutation tracks for 4, 6, or 8 pole brushless motors, and uses built-in gapping mechanism that requires no special tools or parts that can get lost or damaged. With ability to accommodate motor shafts from ¼ to ½ in. including metric sizes, encoder is suitable for use with variety of motors.

GE Co., GE Consumer Products
Louisville, KY 40225
Aug 04, 2008 Designed to perform for more than 50,000 hr, GE LED Cove Lighting System provides 280 useable lumens/ft and consumes just 6.5 W of energy. Unit eliminates light-quality inconsistencies and incorrect color temperatures or differing brightness levels in replacement lamps. It can be dimmed when connected to electronic low-voltage reverse phase control dimmer, and features 120° uniform beam pattern that produces bright and even warm-white light that eliminates socket shadows.

Hilti Inc.
Tulsa, OK 74121
Aug 04, 2008 Designed for reinforced concrete, granite curbstone, slabs, bricks, metal beams, and steel pipes, Models DCH 230 and DCH 300 Electric Diamond Cutters have cutting depth adjustment mechanism to reach depths of 3.4 and 4.7 in. Hilti Smart Power electronic control system constantly regulates motor power to suit material being cut and pressure applied to tool. Employing ergonomic in-line design with grip and cutting blades in exactly same axis, units allow precise guidance with less pressure.

IMS Company
Chagrin Falls, OH 44023
Aug 04, 2008 Eliminating violent pulling apart of molecules, IMS Heated Gate Cutters allow large gates to be cut with minimal stress on part and on worker by reducing most cracking, fracturing, and whitening around gates, leaving smooth surface. Precision temperature controller holds temperature steady, while foamed insulation keeps handles cool. Engineered from scratch to be heated, units have field-replaceable components including blades.

Yokogawa Corp. Of America, Meter & Instrument Div.
Newnan, GA 30265
Aug 04, 2008 Available with either white or red scale, Back-Lit Switchboard Meters accept inputs of DCV, DCA, ACV, or ACA. Units feature long lasting LED illumination that eliminates need for frequent replacement of incandescent lamps. Various dc back-light voltages are also available.

ARAcontent
Hopkins, MN 55343
Aug 04, 2008 Offering article-based, cost-per-click platform, Adfusion gives B-to-B marketers way to drive qualified visitors to their Web destinations. It uses well-written headline topics to allow readers to self-qualify based on their interest in subject matter, and then guides them to click through to client Web destinations to take action. Customers only pay for visitors that arrive at clients' Web destinations through articles placed on Adfusion network.

Broadcom Corp.
Irvine, CA 92618
Aug 04, 2008 Combining WiFi®, Bluetooth®, and FM functionality into single 65 nm silicon die, Model BCM4325 utilizes coexistence algorithms to minimize interference caused by multiple wireless technologies operating on single chip in same frequency band. Shared antenna system intelligently manages Bluetooth and Wi-Fi radios to optimize coexistence with other radio technologies. Integrated chip is suited for mobile phones and other consumer devices.

CGI GROUP INC.
West Montréal, Québec H3A 2M8  Canada
Aug 04, 2008 Providing modular rating, billing, and order management solution, Tapestry® 8.0 includes web-based Tapestry Order Acquisition Manager, which supports order and account management for Communications Service Providers. Within Tapestry Service Manager, users have complete version control over configurable objects through user interface. Program supports Telemanagement Forum's framework, including interface infrastructure for sending and receiving API transactions using Forum's OSS/J standards.

CCC Information Services, Inc.
Chicago, IL 60654
Aug 04, 2008 Compatible with Microsoft Vista®, CCC Comp-Est(TM) v10.10 includes Chief Automotive Vehicle Specifications Viewer, which enables user to zoom in and pan on diagrams, as well as conduct point-to-point vehicle measurement. Viewer also helps user compare factory specifications to post-accident condition and determine proper course of action. Instead of seeing only first matching part for aftermarket vendor, CCC Comp-Est can display multiple matching parts in Aftermarket Parts Selection screen.

EXFO
Quebec G1M 2K2  Canada
Aug 04, 2008 Along with testing capabilities for Fibre Channel network deployments, FTB-8525 and FTB-8535 Packet Blazer modules support optional test suite for complete performance validation of Ethernet services. Multi-service modules offer fully integrated datacom testing, providing 1, 2, 4, and 10 Gbps full-line-rate Fibre Channel traffic generation and analysis. Key performance tests include BER testing, round-trip latency measurement, and buffer-to-buffer credit estimation.