VXI Technology Inc.
Irvine, CA 92614
Aug 06, 2008 LXI Class A compliant EX1000A Series instruments integrate signal conditioning, digitization, and software to offer complete DAQ solution for precision temperature and voltage measurements. Open-architecture 1U modules also incorporate complete end-to-end self-calibration, and support sampling rates of up to 1,000 Sa/sec/ch with typical accuracies of ±0.2°C (temperature) or 0.05% + 10 µV (voltage). Thermocouple and voltage channels can be combined in 16, 32, or 48 channel configurations.

BitWise Controls, LLC
Larkspur, CO 80118
Aug 05, 2008 Suited for A/V integrators, BC4 standards-based control system network interface allows IP-based software and control systems to monitor and control hardware devices. Modularity enables matching of base units and expansion modules to fit any application. Powered by 802.3af PoE or 12 Vdc wall supply, system is comprised of base unit and various plug-in expansion I/O modules housed in 4.5 x 5 x 1 in. steel enclosure, which also contains network adaptor and temperature sensor.

Sherwin-Williams
Cleveland, OH 44115
Aug 05, 2008 Suited for interior/exterior use in industrial, marine, and commercial applications, Polylon HP Polyurethane provides high gloss and color retention as well as resistance to chemicals, abrasion, and impact. High-solids solution, with VOC level under 250 g/L, comes in range of colors as 2-component polyester-aliphatic urethane coating. It is also resistant to splashes, spillage, and fumes from dilute acids, alkalis, solvents, and fuels.

Sherwin-Williams
Cleveland, OH 44115
Aug 05, 2008 Featuring Ozone Transport Commission (OTC)-compliant and Hazardous Air Pollutant (HAPS)-free formulation, Waterbased Acrolon 100 retains appearances over range of chemical, weather, and mechanical conditions. It is environmentally friendly, has VOC level under 100 g/L, and promotes color and gloss retention. Along with various marine and industrial applications, areas of use can include USDA-inspected facilities.

Industrial Test Systems, Inc.
Rock Hill, SC 29730
Aug 05, 2008 Able to produce results within 3 min, WaterWorks(TM) Total Iron detects ferric as well as ferrous forms of iron without requiring meter. User adds contents of one iron powder pillow to supplied vial, fills vial with water sample, closes vial with screw cap, and shakes sample for 20 sec. Product meets National Secondary Drinking Water Regulations, set forth by USEPA, which recommend iron level of no more than 0.3 ppm. Detection levels for this visual test are 0, 0.3, 0.5, 1, 3, and 5 ppm.

Kadant Johnson, Inc.
Three Rivers, MI 49093
Aug 05, 2008 Featuring integral locking mechanism that secures elbow into position, 45° Syphon Elbow is intended for installation on blind rolls or rolls with hand hole access. All components of elbow are constructed of stainless steel to provide corrosion-resistance. In addition, 45° angle results in less cantilever weight compared to long bent syphon pipe, causing less stress on horizontal syphon pipe thread connection.

Murata Power Solutions, Inc.
Mansfield, MA 02048
Aug 05, 2008 Delivering 50-60 W from 1.6 x 2 x 0.4 in. PCB-mounted, open-frame package, UEI-series isolated, wide-range DC/DC converters include 4:1 input voltages of 9-36 and 18-75 Vdc. Operating from -40 to +85ºC, they have full magnetic and optical isolation of up to 2,250 Vdc that provides basic insulation. Units feature input under-voltage lockout, over-temperature protection, over-current hiccup, auto restart, output overvoltage protection, and reverse conduction immunity.

Lee Company, The
Westbrook, CT 06498 0424
Aug 05, 2008 Power Generation Chek® Valves are field serviceable, allowing users to disassemble and service valves using rebuild kit. Featuring low leakage and high flow, units are suited for use in purge air, water injection, and liquid fuel applications. Available with or without removable, washable Hi-Bar® Safety Screen, valves can be designed according to specific customer requirements.

Interroll Corp.
Wilmington, NC 28405
Aug 05, 2008 Designed specifically for decline conveyors with fail safe requirement, Model EC100B RollerDrive features spring loaded fail safe brake that prevents drifting on inclines while ensuring smooth operation and low noise emission. Mechanical rotor-locking break is spring-loaded and cycles with main power; it does not cycle with each start and stop of the conveyor. As long as the power bus is on, the magnetic force created by solenoid keeps rotor free.

Thermo Fisher Scientific
Waltham, MA 02454
Aug 05, 2008 HAAKE RheoScope HT module features SER (Sentmanat Extension Rheometer) system that extends any conventional steady rotational rheometer into extensional rheometer, supports solid tensile testing, pear and peel testing, as well as friction testing, and covers operating temperature range from 0-250°C. Fully integrated into HAAKE MARS rheometer platform, it offers object lens, polarizor, and camera control, and online display of data, video sequences, and storage for later analysis.

Analog Devices, Inc.
Norwood, MA 02062-9106
Aug 05, 2008 AEC-Q100-qualified for -40 to +125°C operation, ADuM120xW 2-channel, ADuM130xW 3-channel, and ADuM140xW 4-channel digital isolators are designed for motor drives and battery management systems. They provide multiple isolation channels in various configurations and data rates up to 25 Mbps. Based on iCoupler® chip-scale micro-transformer technology, units include digital interface and CMOS-based parts that operate with supply voltage on either side from 3.0-5.5 V.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 05, 2008 Series MAX3886 is designed for passive optical network equipment used in fiber-to-the-home market and optical network terminals used in FTTH installations including Verizon FiOS®. Functionality combines multirate clock, data recovery, and serialization/deserialization within single integrated device. Available in 8 x 8 mm, 56-pin TQFN package, system operates from 3.3 V supply and is fully specified over -40°C to +85°C extended temperature range.

Semtech Corp.
Newbury Park, CA 91320
Aug 05, 2008 Along with clamping voltage performance minimized to protect sensitive ICs, TClamp(TM)1201S features 15 pF capacitance to help maintain signal integrity. This 12 V device protects against overvoltage caused by ESD, cable discharge events, and lightning. In addition to ADSL and VDSL applications, RoHS-compliant part can protect RS-232 serial ports. Use of 6-pin flow-through package lends to flexibility in routing traces and facilitates common mode or differential configuration.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 05, 2008 Equipped with integrated switching FET, IGBT driver, and output short- and open-circuit protection, MAX8685 Series is suited for SLR DSCs, film cameras, cell phone cameras, web cameras, or personal media players. Model MAX8685F, with integrated voltage monitor and programmable current limit of 2.6 A, can charge 100 µF capacitor to 300 V in 2 sec. Housed in 2 x 3 mm, 8-pin TDFN packages, Models MAX8685C/MAX8685D do not include voltage monitor or input-voltage monitoring.

Maxim Integrated Products
Sunnyvale, CA 94086
Aug 05, 2008 Achieving -57 dB PSNR to minimize jitter degradation in noisy power-supply environments, MAX3622 utilizes low-noise VCO and PLL architecture to generate two 0.14 psRMS clock outputs from 25 MHz crystal resonator. It integrates LVPECL and LVCMOS buffers to provide 125 MHz LVCMOS and 156.25 MHz LVPECL output frequencies simultaneously. Specified over 0-70°C commercial temperature range, unit operates from 3.3 V ±5% and is available in lead-free, 16-pin TSSOP package.

4D, Inc.
San Jose, CA 95128
Aug 05, 2008 Combining 4D Ajax Framework and 4D for Flex, 4D Web 2.0 Pack v11 r2 enables 4D developers to utilize Web 2.0 technologies and deliver live web and Internet applications to browsers, desktops, and portable devices. 4D for Flex provides Flex-to-database direct connectivity, while 4D Ajax Framework combines power of Ajax and 4D databases, bringing 4D application data to browser, RIA, and iPhone. With HTML 5 and Google Gears, users can access web applications even when they are offline.

CareTech Solutions, Inc
Troy, MI 48084
Aug 05, 2008 Available 24/7/365, Service Desk solution is provided by industry-certified professional support analysts that are trained in highly specialized clinical and business software applications running hospitals. Staff employs framework of best practices, as defined by Information Technology Infrastructure Library, and single point-of-contact for all IT issues and requests. In some instances, staff is able to diagnose issues before they result in need for call from hospital.

Ericom Software, Inc.
Closter, NJ 07624
Aug 05, 2008 Able to manage VMware ESXi without need to deploy VirtualCenter, PowerTerm WebConnect promotes standardization of one solution for management and delivery of virtual desktops and server-based applications. Desktop virtualization and presentation virtualization solution integrates with VMware ESXi hypervisor and offers secure and centrally managed access to virtual desktops, Windows Terminal Servers, blade PCs, remote workstations, and legacy hosts.

Eurotech Group
AMARO (Udine) 33020  Italy
Aug 05, 2008 Based on Intel® EP80579 Integrated Processor, Eurotech A3pci8024 brings x86 Intel Architecture capabilities to applications for industrial control, transportation, medical, and communications industries. Solution offers standardized small form factor platform as well as range of I/O options and CompactPCI (cPCI) connectivity. It is compatible with Microsoft Windows Embedded XP and Linux operating systems and features ECC-supported memory.

EXFO
Quebec G1M 2K2  Canada
Aug 05, 2008 Housed in IQS-500 or IQS-600 unified test platform, IQS-8525 and IQS-8535 Packet Blazer modules enable fully integrated multi-rate datacom testing. They support FC-0/1/2 logical layer configurations to execute traffic generation, BER testing, round-trip latency measurement, and buffer-to-buffer credit estimation at full line rates to 10 Gbps. Ethernet services performance validation is achieved using BER and RFC 2544 testing at full line rates of 10/100 Mbps as well as 1 and 10 Gbps.