Fujitsu Corp.    Sunnyvale, CA 94088
Apr 12, 2010 Capable of handling up to 8,000 or 16,000 new notes, respectively, multi-cassette Models G610 and G611 offer advanced banknote validation, supporting first pass acceptance rates. Deposit and recycle cassettes can be configured in any combination from 1-4 cassettes to meet customer specifications, and front or rear service configurations can be built into through-the-wall applications. Local and remote ready diagnostics isolate and often resolve operational issues.

Vasco Data Security Inc.    Oakbrook Terrace, IL 60181
Apr 12, 2010 DIGIPASS® Pack for Remote Authentication includes DIGIPASS for Mobile licenses, which enable use of mobile phones as authentication device. Addressing security needs of SMEs by offering 2-factor authentication and digital signature capabilities, pack edition is used to gain secure remote access to corporate networks and business applications. Packs with DIGIPASS for Mobile are powered by IDENTIKEY® as authentication server and are available for 5, 10, 25, or 50 users.

PI Bearing Technologies    Waukegan, IL 60085
Apr 12, 2010 Constructed to RoHS standards, FR-164 lead (Pb)-free, steel-backed polymer bearing is designed for use in extreme oil pressure and high-speed conditions. It is offered as straight sleeve bearing, with standard IDs from 2-180 mm; inch sizes are also available. Anti-wear properties, degree of friction, and ability to resist cavitation meet needs of demanding applications in various industries.

Pilz Automation Safety L.P.    Canton, MI 48187
Apr 09, 2010 Along with PROFINET interface, PSSuniversal features half byte mapping, which facilitates orientation within system. Integrated standard automation lends to safety, while software accelerates commissioning. There is an absence of feedback between standard and safety, and safety settings for each device are made at single point. Based on modular structure, system minimizes planning and management effort via utilization of FS addresses plus number of addresses.

ON Semiconductor, LLC    Phoenix, AZ 85008
Apr 09, 2010 Housed in SC-88A package measuring 2.2 x 2.2 x 1.10 mm, Model NCP508 can drive currents in excess of 50 mA and offers ripple rejection of 70 dB typical at 1 kHz. Noise performance of 40 µVrms at 1.5 V contributes to clean output voltage, while switch on time of less than 20 µs helps save energy. With max operating voltage of 7 V, regulator provides low voltage dropout performance of 140 mV at 30 mA load and can withstand voltage transients up to 13 V.

Canfield Connector    Youngstown, OH 44514
Apr 09, 2010 Installed between DIN type coil and its mating connector, Interposed Lighted Wafer (iLW) has SMT design and Gallium Arsenide LED which allow it to retrofit existing applications or be used in conjunction with unlighted connectors. It is MINI standard but also available for Sub-Micro 8 or 9.4 mm, DIN 43650 Form "A"/ISO 4400, and EN 175301-803:2000 retrofits. Rated to NEMA 4, product is not polarity dependent and can be installed several times without degrading contact surfaces.

Flir Systems, Inc.    North Billerica, MA 01862
Apr 09, 2010 Along with 32-bit MCU that optimizes motion control fidelity and Ethernet interface for IP and web control, E-Series offers expandable payload I/O and digital encoders that provide user-configurable ranges of motion. Payload capacities range from 15-70 lb, depending on model, and available options enable on-board stabilization and geo-pointing. Computer-controlled units feature microstep control up to 1/8 and fully controllable pan/tilt speeds from below 0.006°/sec to 120°/sec.

Universal Instruments Corp.    Binghamton, NY 13902 0825
Apr 09, 2010 Designed to increase utilization rates to over 90%, Linechart(TM) multi-vendor reporting software provides complete visibility into all production lines and identifies factory inefficiencies. It helps maximize utilization by monitoring production lines and providing graphical feedback for several KPIs across Universal and non-Universal pick-and-place equipment. By displaying data down to feeder and nozzle level, all guess work is removed from debugging issues.

CUI, Inc.    Beaverton, OR 97005
Apr 09, 2010 Consuming 10 mA at 5 Vdc, AMT303 Series generates position information using capacitive code generation system coupled with proprietary ASIC, which is immune to environmental particulates and magnetic interference. Commutation output can accommodate brushless motors with 2, 4, 6, 8, or 10 pole pairs, and is selectable via SPI. Utilizing TCL code, on-board PIC 16F690 MCU operates at up to 10 MHz. Onboard EEPROM can store up to 128 bytes of customer data.

Phidgets, Inc.    Calgary, AB T2M3R7  Canada
Apr 09, 2010 Model 1018 - PhidgetInterfaceKit 8/8/8 allows sampling speed to be set at 1, 2, 4, 8, and multiples of 8 msec, up to 1,000 msec, for each analog input on board. Update rate is 1,000 samples/sec maximum for 4 channels and 500 samples/sec maximum for all 8 channels. On digital inputs and outputs, update rate is 125 samples/sec. Board includes 5 V terminal block and also allows users to program Phidgets via API that supports Windows, Mac, and Linux.

RPS Automation LLC    Spokane Valley, WA 99216
Apr 09, 2010 Suited for use with RPS selective soldering systems, RPS Vision Correct(TM) fiducial inspection and auto correction solution uses stored images to validate known fiducial points and other indicators. Soldering process will stop if fiducial patterns are not found, preventing damage to PCBs. System also identifies position errors of fiducials and uses correction algorithms to adjust soldering program by X and Y axis deltas. It offers position correction accuracy to ±0.005 in.

WIKA Instrument Corporation    Lawrenceville, GA 30043
Apr 09, 2010 Available in stainless steel, Monel, and copper alloy models, XSEL(TM) Series is suited for pressure applications found in refining, petrochemical, and chemical plants. Pressure system utilizes stress reducing Bourdon tube design and movement with hardened components, which enables it to produce 10 million or more pressure cycles.

Quest Controls, Inc.    Palmetto, FL 34221-4802
Apr 09, 2010 Wall-mount TELSEC® ESB provides 96 unique control strategies and local interface with backlit 80-character LCD, flexible keypad, and local craft port. While active alarms and analog values constantly scroll across LCD to facilitate review, embedded Web Server enables access via network connection using standard Web browser. While basic model provides 16 universal inputs and 16 outputs, expansion accommodates up to 128 universal inputs, 64 digital outputs, and 10 analog outputs.

MadgeTech    Warner, NH 03278
Apr 09, 2010 Able to measure and record data from up to 8 thermocouple channels, CTL2000 lets user verify and validate post-production meat sterilization cycles. Thermocouples can be inserted into different sections of meat, aiding pathogen reduction and post-slaughter sterilization processes. Supplied in black anodized aluminum enclosure with stainless steel hook, splashproof logger can be hung directly from carcass and features pushbutton or programmable start and status LEDs.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Apr 09, 2010 By allowing users to detect shorts, open circuits, and degraded source connections in remote industrial applications, Model LMP8358 facilitates pressure and thermocouple bridge measurements. Zero-drift, programmable amplifier operates from single 2.7-5 V supply, providing 10 µV max offset voltage and 50 nV/C max offset voltage drift. Supplied in 14-pin SOIC and TSSOP packages, amplifier features gain bandwidth of 8 MHz while consuming 1.7 mA of supply current.

Tapeswitch Corp.    Farmingdale, NY 11735
Apr 09, 2010 As interface between Tapeswitch sensing devices and machine or process control, C6 safety controller monitors up to 6 zones consisting of 1-3 B-Series Light Curtains and/or 1-6 other sensing devices. Unit detects sensor, cabling, or internal faults; offers automatic/manual reset options; and provides visual status display of all zones. Supplied in metal enclosure, fully self-contained unit is designed to be wall mounted and has 6 knockouts that accept standard ½ or ¾ in. conduit.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Apr 09, 2010 Housed in die cast aluminum with NEMA 6 rating, Series CBAS Switches are each equipped with 2 micro switches, allowing one actuation angle for small conveyor belt deviations and second actuation for extreme belt deviations. Actuation angles are factory set at 20° and 35°, and each angle can be adjusted in field to fit any application. Operating from -4 to 140°F, SPDT switches feature automatic reset, and cover that allows for access to wiring terminals and angle adjustments.

Banner Engineering Corp.    Minneapolis, MN 55441
Apr 09, 2010 Available for iVu Image Sensors, iVu Remote Touch Screen Display enables vision inspection in hard-to-access areas. Users can program iVu sensors through single display and change inspection parameters remotely. Connected via 3-50 ft cable, 3.5 in. flat panel display incorporates 2 LEDs that provide feedback on remote sensor operation - one for Power/Error and another for indicating Pass/Fail inspection results. Display can be hot-swapped among multiple live sensors.

All Sensors Corp.    Morgan Hill, CA 95037
Apr 09, 2010 Based upon CoBeam2(TM) technology, which minimizes package stress and optimizes position sensitivity, MLV Series Millivolt Low Voltage Pressure Sensors are temperature compensated and calibrated for zero and span. Units are specified at 5 V excitation with just over 2 mW power consumption. Offered in PCB mountable package, sensors come in gage and differential models suitable for portable devices, medical devices, remote sensing, HVAC, and industrial controls.

Saelig Co., Inc.    Pittsford, NY 14534
Apr 09, 2010 Powered by USB port, USBscope50 standard BNC oscilloscope probes and has modular design that lets user configure single channel or up to 4 channels when using multiple adapters. Synchronization system ensures tight signal channel-to-channel matching and concurrent triggering. In addition to 300 V Cat II galvanic input isolation between BNC ground and USB ground, features include programmable trigger threshold and edge modes, programmable input offset, and 50 MSps 8-bit sampling.