Dymax Corp.
Torrington, CT 06790
Aug 07, 2008 Suited for spot curing of coatings as well as adhesive bonding of polycarbonate, PVC, PET, metal, glass, and other substrates, BlueWave® LED generates light using array of surface mount LEDs instead of traditional metal halide or mercury bulbs. LEDs produce visible light energy in narrow wavelength band centered at 410 nm. System emits maximum visible-light intensity output of over 2,500 mW/cm² from 8 mm dia lightguide, and allows users to adjust intensity output from 0-100%.

Aimtec, Inc.
Dollard Des Ormeaux, QC H9G3B9  Canada
Aug 07, 2008 Including 8 models in 51.5 x 26.1 x 15.8 mm PCB mountable encapsulated package, AMEL5-MAZ Series 5 W ac-dc converters feature universal inputs of 90-260 Vac, 47-440 Hz, or 120-370 Vdc. Units come with operating temperature range of -40 to +80°C, no-load power consumption of 0.3 W, and efficiency rates up to 75%. They have output ranges from 3.3-24 Vdc, ripple and noise as low as 50 mV p-p, and tight line and load regulation of ±0.5% (no minimum load required).

Elma Bustronic
Fremont, CA 94538
Aug 07, 2008 Optimized for performance via signal integrity studies, 18 layer, 5-slot AdvancedTCA Backplane has field-replacable, small, and dense standard MicroTCA connectors with compression mount design for IPM Sentry shelf manager connections. If damaged, MicroTCA connector can be unscrewed from backplane and replaced. Backplane features 3x replicated Mesh topology, and also allows implementation of standard Full Mesh or Dual Star topologies.

STMicroelectronics
GENEVA   Switzerland
Aug 07, 2008 Designed for precision clock management in embedded and handheld applications, 2-channel STCD1020, 3-channel STCD1030, and 4-channel STCD1040 integrate AC coupling capacitor to minimize external components. Capable of single-ended sine-wave or square-wave transmission in 10-52 MHz range, ICs can drive loads up to 20 pF to simplify output circuitry. They feature 2.5-3.6 V standard supply voltage, 1.65-2.75 V operation range, and -40 to +85°C specified operating temperature range.

Turner Designs
Sunnyvale, CA 94086
Aug 07, 2008 Incorporating 3 optical sensors, C3 Submersible Fluorometer can detect in vivo Chlorophyll a, blue green algae, rhodamine WT dye, crude oil, CDOM, optical brighteners, as well as turbidity in freshwater, coastal, and open ocean applications. C-Soft user interface enables intuitive calibration, data logging, and data management. Digital data output allows for integration with existing water monitoring systems such as CTDs, dataloggers, vessels of opportunity, and buoys.

WS Tyler
Mentor, OH 44060
Aug 06, 2008 TYCAN HSG T-Class Vibrating Screen allows screen media to be blended, modified, and exchanged, optimizing wear life versus open area. Stroke and amplitude can be adapted to product without changing parts and reinforced structure promotes longevity of components.

CyberResearch, Inc.
Branford, CT 06405 2932
Aug 06, 2008 With up to 2 GHz Pentium® M CPUs, 4 USB ports, and 2 COM ports, PXI CXDC Controller Boards offer vibration resistance, withstand shocks up to 30 g, and operate at temperatures up to 131°F. PXIC Series Chassis includes two 3U 8-slot benchtop chassis and portable 3U 14-slot chassis with 15 in. touchscreen LCD. PXI Expansion Boards include 7 multifunction A/D boards with 2-64 channels, 2 multifunction D/A boards with 4 or 8 channels, and 4 DIO boards with 32 or 48 channels.

Control Co.
Houston, TX 77258 8307
Aug 06, 2008 Equipped with self-contained humidity and temperature sensors, Traceable® General-Purpose Hygrometer/Thermometer features separate data hold switch so that readings may be captured and noted. Unit has RH range of 10.00-95.00% with resolution of 0.01% and accuracy of ±1.5% RH. Temperature range is 32.0-122.0°F or 0-50°C with resolution of 0.01° and accuracy of ±0.4°C. Operating on 9 V alkaline battery, meter provides response time of 30 sec to 3½ min.

Watlow
St. Louis, MO 63146
Aug 06, 2008 Offering precisely controlled heat distribution, RELIALINE(TM) 170 is automatically self-regulating for temperature uniformity. System fits outer diameter of standard tubing, creating close contact with maximum surface coverage. Internal rails are spring loaded to allow for click-on fit and maximum contact force for optimal thermal transfer. Incorporating double pane design that uses air as insulator, insulation system ensures outside surface temperatures are safe-to-touch.

Miller Electric Mfg. Co.
Appleton, WI 54912 1079
Aug 06, 2008 Providing 10,500 W of generator power and up to 225 A of welding output, gas-engine driven Bobcat 225 features fully enclosed case, which directs hot air away from engine for cooler operation, ensuring full output, even in hot weather or when it is mounted in confined space with restricted airflow. Generator is available with Kohler 23 hp or Subaru/Robin 22 hp gas engine and is suited for MRO, farm and ranch, construction, and truck-mounted applications.

IMI Sensors, Div. of PCB Piezotronics
Depew, NY 14043-2495
Aug 06, 2008 Series 686B USB Programmable Smart Vibration Switch is designed for continuous monitoring and protection of cooling towers, fin fans, pumps, HVAC systems, and other critical machinery. Electronic switch offers remote reset capability and USB programmable delays to avoid false trips. Requiring 2 wires, universally powered unit is hermetically sealed, mounts with single stud, and is available for use in hazardous areas.

Cap Wireless, Inc.
Newbury Park, CA 91320
Aug 06, 2008 Designed for defense electronics and homeland security industries, CHPA0618-1 ultra-broadband power amplifier incorporates GaAs MMIC technology into Spatium(TM) broadband spatial combining architecture. Unit has multiple element architecture that provides protection from single point failures and enables dispersive, 3D heat dissipation. Featuring 40 W typical saturated power, it includes soft-fail in event of device failure, with no warm-up or turn-on delay.

Sensgard LLC
Pittsford, NY 14534
Aug 06, 2008 SensGard® SG31 has noise reduction rating of 31 dB, weighs 2 oz, and is designed for user comfort. Offering consistent protection without distortion across all frequencies, ZEM technology uses mechanical energy of sound waves to minimize sound. No batteries are required. Wearer is fully protected from harmful noise but can still discern speech and other ambient sounds. SensGard® SG26, with noise reduction rating of 26 dB, is also available.

Porous Materials, Inc.
Ithaca, NY 14850
Aug 06, 2008 Used for characterization of porous materials used in industries such as biotech, pharmaceutical, food, and environment, PMI Compression Liquid Extrusion Porosimeter (LEP) keeps sample under compressive stress during measurement and produces no harmful effects on personnel or environment. Providing up to 1,000 psi compressive stress, unit also enables users to measure pore structure of same sample as a function of compressive stress without dismantling sample chamber.

Schroeder Industries LLC
Leetsdale, PA 15056-1025
Aug 06, 2008 Suited for mining, steel mills, and pulp and paper applications, Model QLF15 is equipped with fast acting stainless steel bypass valve. Offered in re-cleanable metal mesh, plastic coreless, or deep-pleated media for high dirt holding capacity, it has maximum operating pressure of 1,500 psi and temperature range of -20 to 225°F. Available in 16 and 39 in.sizes, hydraulic filter features L-ported design, porting base and cap of ductile iron, and element case of steel.

Macron Dynamics Inc.
Croydon, PA 19021
Aug 06, 2008 Capable of speeds of up to 200 ips and accommodating loads of up to 40 lb, PSC-28 offers standard options including beam lengths up to 20 ft and application specific sensors. Standard features include NEMA 23 or 34 motor mount adaptors, shafted pulley, and 3 cart lengths. Constructed of corrosion resistant, anodized aluminum extrusion, PSC-28 is designed to handle light loads in high volume, high speed applications in food handling industry. Stainless steel version is also available.

Alienware
Miami, FL 33186
Aug 06, 2008 Based on 3.2 GHz Intel® Core(TM) 2 Extreme QX9770 CPU overclocked to 4.0 GHz, Area-51 ALX provides 4 Gb of Corsair(TM) Dominator(TM) DDR3 1600 MHz memory. For graphics, unit offers choice of NVIDIA® Quad SLI® featuring dual NVIDIA® GeForce® 9800 GX2 cards or ATI(TM) CrossFireX(TM) configuration with dual ATI Radeon(TM) HD 3870 X2 cards. All Area-51 ALX desktops come standard with Alienware ALX High-Performance Liquid Cooling.

Sieb & Meyer USA, LLC
Cincinnati, OH 45242
Aug 06, 2008 Intended for OEMs, specialty machine builders, and retrofitters, 8th generation CNC and motion control platform for multi-spindle automatic machine tools blends industrial hardened technology with PC-based control. Unit adds single point threading, and provides data collection, machine network connectivity, and remote diagnostic service support.

Future Lighting Solutions
Pointe-Claire   Canada
Aug 06, 2008 Combining 8-bit All Flash(TM) MCU with 4-channel HCD, µPD78F8024 HCD/LED MCU can be used in lighting applications that employ multiple LEDs as well as industrial control applications such as stepping motors, solenoid drives, and switch-mode power supplies. Supporting wide input voltage range of 9-38 V, flexible 4-channel architecture also enables designs using both buck and boost regulator topologies. Unit is available in 64-pin LQFP.

PowerGate LLC
Santa Clara, CA 95054
Aug 06, 2008 Measuring 2 x 4 in. with 1.25 in. profile, TRACOPOWER TOP-100 Series is available in 7 single output models that provide 3.3, 5, 12, 15, 24, and 48 Vdc output voltages. Circuit design achieves efficiencies in excess of 90% which, enables convection cooled operation ranging from -25 to +50°C, making it suited for high-density applications in industrial, ITE, and consumer markets. CE marked unit meets IEC60950-1 and UL/cUL 60950-1 Class II safety standards.