TGO Consulting Inc    Markham   Canada
Mar 20, 2012 Featuring Excel as user interface, True Sky(TM) provides spreading/calendarization of values, mass adjustments by amount or percentage, global what-if modeling and unlimited versioning. Detailed notes, explanations, and documents can all be attached to spreadsheets, and planning data is stored in SQL Server, allowing it to scale to large number of users. Reporting and analysis of planning data is available from within Tru Sky, but commercially available analytical/reporting tools can also be used.

Block Engineering, Inc.    Marlborough, MA 01752
Mar 20, 2012 Based on tunable Quantum Cascade Laser spectral engine, LaserBench(TM) Spectrometer features purgeable sample compartment designed to accommodate center-focus FTIR accessories. Internal optics are sealed and desiccated, with windows mounted within sampling area. Controlled from Windows user interface on standard PC via USB communications interface, spectrometer includes status lights for laser and instrument as well as remote start/scan button.

Vasco Data Security Inc.    Oakbrook Terrace, IL 60181
Mar 20, 2012 Able to eliminate use of paper-based TAN lists while adding security layer to bank's infrastructure, DIGIPASS 736 authentication device features adaptive signing, what-you-see-is-what-you-sign capability, and optical interface that facilitates data transfer. Product offers zero footprint solution against man-in-the-browser and man-in-the-middle based fraud. Communication between PC and device is established through flashing pattern on user's PC and optical sensors on reader.

BRP    Québec J0E 2L0  Canada
Mar 20, 2012 Suited for light sport, ultra-light aircraft, and general aviation industries, Rotax 912 iS engine incorporates modern fuel injection system and digital engine control unit to ensure optimal fuel and air mixture at any altitude. This helps extend flight range while lowering operating costs and CO2 emissions. Time between overhauls for this 4-stroke, 4-cylinder 100 hp aircraft engine with redundant electronic fuel injection system is 2,000 hr.

SiliCycle Inc.    Quebec City, QC G1P4S6
Mar 20, 2012 SiliaPrepX(TM) polymeric SPE cartridges and well plates are designed to meet solid phase extraction needs. SiliaPrepX polymeric sorbents allow treatment of common matrices, such as human and animal biological fluids, waste waters, petrochemical and toxicological residues, as well as food and beverage. Products include Hydrophilic-Lipophilic Balance (HLB), Divinylbenzene (DVB), Strong Cation and Anion Exchangers (SCX & SAX), as well as Weak Cation and Anion Exchangers (WCX & WAX).

Schroeder Industries LLC    Leetsdale, PA 15056-1025
Mar 20, 2012 Designed to fit standard indicator port of Schroeder return line hydraulic filters, MS17, MS18, and MS19 Electrical Dirt Alarm® Indicators alert operators as to need to change element. Crimped body design incldues Aluminum 2011-T-3 housing, and thermal lock out option can prevent false indications during cold starts. Compliant to IP67, MS17 has 4-pin Brad Harrison connector, MS18 has 2-pole AMP Junior Power Timer connector (AMP-JPT-P2), and MS19 has 2-pole Deutsch connector (DT 04-2P).

SEAVUS    Skopje 1000  Macedonia
Mar 20, 2012 Designed for viewing Microsoft Project® files, Seavus Project Viewer(TM) v6.9 includes Compare Project feature, which is useful for project decentralization. Feature enables team members to view different versions of project plans and compare task duration, resource usage, and project milestones visually. Users can also conduct What-If scenarios when there is more than one project version, track project changes to create local project history, and analyze how project plan has evolved.

Data Device Corp. (DDC)    Bohemia, NY 11716-2482
Mar 20, 2012 Supporting entire line of MIL-STD-1553 and ARINC 429 AceXtreme® boards and components, BU-69093 Support Package makes development with LabVIEW® and LabVIEW® Real-Time applications intuitive. Package allows engineers to design custom software applications utilizing 3 levels of virtual instruments, without need for coding. Engineers can select from supplied samples to facilitate development and use intermediate or low level VI's.

Suss Microtec AG    Usa, VT 05677
Mar 20, 2012 Along with facilitated transfer of processes to MicroTec production tool, RCD8 manual Resist Coat and Develop Platform for substrates can be custom tailored, anywhere and within minutes, from basic manual spin coater to semi-automated GYRSET® enhanced coater and puddle and spray developer tool. Solution is suited for daily R/D work up to small-scale production and covers all necessary coating and developing processes for MEMS, advanced packaging, LED, and R&D applications.

Compaction America, Inc.    Kewanee, IL 61443 1714
Mar 19, 2012 Supplied as standard on BOMAG 1,570 lb BPR100/80D reversible plate compactor and offered as option on BPR70/70D, BPR55/65D, and BP45/55D models, ECONOMIZER provides real-time soil stiffness results. Acceleration sensor measures stiffness of target material across entire compacted area, and gathered data gathered is instantly displayed via series of 10 yellow LEDs. Indicator also provides warnings against over-compaction, soft spots, and low working frequency.

ICS Electronics Corp.    Pleasanton, CA 94588
Mar 19, 2012 Used for controlling I²C devices from GPIB Bus, Model 4802 provides I²C serial bus, 8-bit parallel bus, and asynchronous serial interface. I²C signals control devices that comply with I²C Specification v3.0 dated June 2007 and also with SMBus Specification 2.0 when used in Standard Mode with 100 kHz bit rate. This IEEE-488.2 compatible interface board may also be used in Fast Mode with 400 kHz bit rate and Fast Plus Mode with 1 MHz bit rate.

Allegro MicroSystems Inc.    Worcester, MA 01615
Mar 19, 2012 Intended for analog and digital satellite receivers, Model A8299 is a monolithic linear and switching voltage regulator that provides power and interface signals to LNB down converter via coaxial cable. Unit requires few external components, with boost switch and compensation circuitry integrated inside. Housed in 5 x 5 x 0.90 mm QFN-28 package, regulator meets or exceeds OEM requirements for satellite set top box designs.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Mar 19, 2012 Measuring 5.7 x 5.0 x 2.1 mm, Model LXDC55B features input voltage of 2.7-5.5 Vdc and can support output currents up to 3.0 A. Single output models provide 1.2, 1.8, 2.5, 3.0, or 3.3 Vdc nominal output. Measuring 4.0 x 4.0 x 2.0 mm and operating as output boost converter, Model LXDC44A delivers up to 0.7 A at 5 Vdc from input of 2.7-4.5 Vdc. Both multi-layer devices are constructed on ferrite substrate with embedded inductor, power IC, and I/O capacitors.

Micro Motion Div., Emerson Process Management    Boulder, CO 80301
Mar 19, 2012 Suited for new or retrofit installations, EtherNet/IP(TM) Module is compatible with all Micro Motion Coriolis flowmeters and is suited for hazardous areas. Device provides access to multivariable data including flow, density, temperature, and other parameters. Web browser offers network access to configuration and diagnostic interface, enabling full range of remote activities. Mounted in control cabinet, module eliminates need to run Ethernet cabling out to field.

Fluid Imaging Technologies    Yarmouth, ME 04096
Mar 19, 2012 Detecting thousands of particles and microorganisms in sample in less than 1 minute, FlowCAM® PV-5x and PV-10x Particle Vision Series takes full color digital image of each particle detected while measuring them based on actual size and shape of images and characterizing them with up to 32 parameters - all in real-time. Analyzers process both liquid and fluidized dry products with particles ranging from 2-800 µm in size and samples as small as .1 mL with up to 90% volume efficiency.

Laird Technologies    Earth City, MO 63045
Mar 19, 2012 Intended for in-building wireless solution providers, omnidirectional CMS69273 provides indoor cellular coverage for GSM, DCS, UMTS, and LTE/WiMAX standards in 698-960, 1,575, and 1,710-2,700 MHz frequency ranges. Uniform and symmetrical pattern, shaped to provide optimal performance and maintain integrity from ceiling mount location, lets system integrators precisely determine cell size. Mounting options include flush mount with screws and anchors or threaded stem.

Larson Electronics, LLC    Kemp, TX 75143
Mar 19, 2012 Extendable to 8 ft in height and equipped with 60 W LED light head, Model LED10W-6RT-LT produces 4,800 lumens and is capable of illuminating 270 x 240 ft area. IP68-rated light head is waterproof, adjustable, and also available in spotlight configuration. Powered by 33 A AGM SLA battery with 500+ charging cycle rating, tower provides 6.5 hr illumination on single charge. Charging options include connection to common 115 Vac wall outlets or 12 Vdc through 12 V adapter with cigarette plug socket.

Platinum Tools    Camarillo, CA 93012
Mar 19, 2012 Measuring 5 x 3.25 x 1 in. and weighing 3.7 oz, BR1 Multi-Stripper (part No. 15041C) is capable of working with diverse voice, data, and video cable types/sizes. Pre-set coax cassette blades are included along with adjustable stripper for twisted pair and audio cables as well as cutters for cable and wire conductors. Tool comes standard with braid comb, Velcro, for folding braid back over cable jacket.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 19, 2012 Model DW-DataPad Handheld Portable Data Viewer can configure as well as read data from up to 500 DW-USB data loggers. Color, 2.8 in. TFT touchscreen, optimized for readability, facilitates navigation through configuration menus. Data downloaded to viewer can be displayed as trend graph or statistical summary. Also, stored data can be transferred to computer via included micro-USB cable and Windows®-based software. Rechargeable battery lasts 5-8 hr typ under constant use.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 19, 2012 Offered in molded package in 5 standard EIA-535BAAC case codes, TANTAMOUNT® TL3 Series features capacitance range of 0.1-470 µF over voltage ratings from 4-63 Vdc with capacitance tolerances of ±10% and ±20%. Designed to extend battery runtime in portable devices, surface-mount capacitors are suited for portable instrumentation, tire-pressure monitoring, medical instruments, local power supplies, hand-held instruments, and battery backup supplies.