American Power Conversion    West Kingston, RI 02892
Jul 20, 2010 Providing up to 100 kW hot-scalable power protection, runtime, and power distribution, Symmetra PX 100kW is suited for small and medium data centers. Rack-based modular design enables users to scale power capacity in 10 kW increments up to 100 kW N+0 or 90 kW N+1. Unit also features Power Distribution Unit with Maintenance Bypass for safety, and hot-swappable Static Bypass Switch that enables UPS to transfer load to utility power without interruption in event of overload.

APEM Components    Haverhill, MA 01835
Jul 20, 2010 Available with solder, wire, or cable terminals and choice of 3 stainless steel grades for bushing and plunger, momentary AV Pushbutton Switches are sealed to IP67 and feature max current/voltage rating of 1 A/30 Vdc with resistive load. When 2 contacts are required, either NO or NC can be used for power. When several pushbuttons are used, 2 contacts are connected as chain to prevent activating both critical functions simultaneously.

Amphenol-Tuchel Electronics GmbH      Germany
Jul 20, 2010 Suited for industrial environments, Model C146M RJ45 Interface features housing that can accommodate up to 5 components alongside RJ module. Plastic body of module fixes and secures standard RJ45 components, while aluminum die-cast housing guarantees protection to IP65. Female connectors are spring bedded and, under intense mechanical stresses and vibrations, transmittance remains 100% without interruption or failure, in conformance with CAT5 standards.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 20, 2010 MAX17040/MAX17041 and MAX17043/MAX17044 1- and 2-cell fuel-gauge ICs utilize ModelGauge(TM) algorithm to estimate state of charge of Li+ battery without requiring current sensing. THey track battery state continuously over varying charge/discharge usage profile while using supply current of 50 µA. Inputs connect directly to battery pack and ICs also offer programmable low-battery alert that warns system MCU to initiate power-management actions.

APEM Components    Haverhill, MA 01835
Jul 20, 2010 Designed to withstand high number of cycles and repetitive jogging, OFF-MOM IH Switch devices feature dome-shaped actuator and spring return. They provide tactile feedback that switch has been activated. Featuring proportional output, IH Linear versions are suited for control valves or variable speed drives, and react to pressure exerted on switch, with response proportional to actuator travel. Both versions include Hall Effect sensors and operate for 5 million cycles.

Maxim Integrated Products    Sunnyvale, CA 94086
Jul 20, 2010 Composed of 2 VVAs integrated into 1 monolithic IC, MAX19790 delivers 44 dB of linearly controlled dynamic range with S21 flatness over frequency and all attenuation settings. Each attenuator incorporates control circuit that provides 22 dB of attenuation range with linear control slope of 10 dB/V. When operating over any 125 MHz contiguous band between 950-2,150 MHz, IC delivers typical and max flatness levels of 0.13 and 0.89 dB peak-to-peak, respectively, through 30 dB to total attenuation.

Amphenol Pcd    Beverly, MA 01915-1065
Jul 20, 2010 Suited for grounding connections in areas with limited visibility or accessibility, ground|mate(TM) conserves time to make earth connection by plugging into threaded bolt without requiring any tooling. Radsok contacts, offering contact-covering up to 65%, provide minimal contact resistance, while click|fit locking system ensures connection stability during vibration and shock. Grounding system is designed for threaded bolt sizes M6 or M8 as well for pins with diameter 3.6, 6, or 8 mm.

Amphenol Pcd    Beverly, MA 01915-1065
Jul 20, 2010 Utilizing carbon fiber-filled plastic material for EMI shielding, C16-3 EMI Connectors are IP65-rated and therefore protected against dust and splashing water, making them suitable for harsh environments. Units handle currents up to 30 A and are available in many different contact layouts. In long-term testing, connectors showed ability to handle intensive temperature and damp heat cycles, and also offer corrosion resistance in salt spray testing.

Analog Devices, Inc.    Norwood, MA 02062-9106
Jul 20, 2010 Featuring HDMI® Version 1.4 Specification support for color spaces, Advantiv® ADV7541 transmitter converts 480i/p and 1080i interlaced output into progressive 1080p format. It includes deinterlacer, consumer electronics control, level shifters, and MCU in 3.75 x 3.75 x 0.65 mm package. Unit also provides audio support of S/PDIF for compressed audio, including Dolby Digital® and DTS®, and 2-channel I2S audio for transmitting stereo at sample rates up to 192 kHz.

Daimer Industries Inc    Woburn, MA 01801
Jul 20, 2010 Featuring low-fluid design for quick drying, 50 Hz XTreme Power® XPC-9250 and XPH-9350 include 64.4 L solution chambers, 56.8 L recovery chambers, and airflows of 94.4 L/sec. Unheated Model XPC-9250 is engineered for cleaning fragile fibers and materials, but can accept hot water nearing 98.9°C. With internal heating system, Model XPH-9350 converts cold water to 98.9°C in minutes. Both include 6.1 m solution and vacuum hoses as well as 30.5 cm floor wands.

AAEON Technology Inc    Taipei   Taiwan
Jul 20, 2010 Powered by Intel® Pentium M/Celeron M CPU up to 1.8 GHz, FWS-2300 desktop network security solution adopts Intel 910GMLE + Intel 82801FBM chipset and provides 4 PCI Gigabit Ethernet ports with 2-port bypass functions. Additional interfaces include one Ultra ATA 100, DOM port up to 2 GB, and 2 SATA I for storage as well as one CompactFlash Type II for OS and application updates and Mini-PCI Type III socket for expansion. RS-232 console port and 2 USB 2.0 ports are also standard.

AEC, Inc.    Wood Dale, IL 60191
Jul 20, 2010 Utilizing DeviceNet distributed I/O network, VacTrac(TM) Series 24/128 can control up to 24 vacuum conveying pumps, 128 loading stations, and 128 purge valves. Unit is based on Allen-Bradley CompactLogix controller with 10 in. color touchscreen operator interface. With manifold sharing capabilities, Series 24/128 can sequence 6 vacuum pumps per manifold line and assign each loading station to any pumps connected to same manifold.

Cumberland Engineering Corp.    South Attleboro, MA 02703
Jul 20, 2010 Offered in 20 x 28, 20 x 36, and 20 x 48 in. sizes, CT500 Series is suitable for recycling of large containers and blow molded objects. Series includes 3- and 5-knife rotor models with 20 in. cutting circle for optimized part ingestion. Rotational end discs provide clean, dust-free granulation without angel hair or smearing. Safety interlocked, rear access hopper facilitates cleanout and inspection, while front hopper access door completely opens up for maintenance.

Emco Maier    Columbus, OH 43228
Jul 20, 2010 Equipped with 25 kW, 4,000 rpm main spindle that delivers 250 Nm torque, Model VT250 is designed for turning, drilling, and threading of chucking, cast, or forged parts. Max work piece turning diameter is 7.87 in. and max length is 5.91 in. Machine provides direct-driven travel of 20.9 x 12.2 in. in X and Z axes and ±3.5 in. in Y axis. Equipped with integrated pick-up system, VT250 self-loads workpieces. Conveyor system stores up to 24 workpieces and moves work into pick-up position.

Emerson Process Management    Austin, TX 78754
Jul 20, 2010 Equipped with compact and drainable Micro Motion F-Series sensors, 2-Wire Micro Motion® flowmeters can be applied to range of installations. Accommodated line sizes range from 1/10-6 in., and flow ranges vary from 0.075-20,000 lb/min. Transmitter (2200S) delivers full measurement performance, without constraints of temperature or viscosity limits. Suited for continuous process applications, it is intrinsically safe and has C1D1, ATEX, and Zone 1 hazardous area approvals.

ifm efector, Inc.    Exton, PA 19341
Jul 20, 2010 With switching frequency of 2,000 Hz, Model O5C500 can verify, sort, and error-proof presence of objects by color in high-speed applications. Transmitter emits pulses of red, green, and blue light, while receiver evaluates pulsed light reflected from target to determine best color for identification. Auto-detect output automatically sets single switching output to PNP or NPN operation. With light spot diameter of 2 x 6 mm, Micro DC unit offers adjustable sensing range of 15-19 mm.

Advanced Test Equipment Rentals    San Diego, CA 92121
Jul 20, 2010 Featuring resident capabilities for EMC CE Mark compliance testing to 6 IEC/EN standards, KeyTek EMCPro® PLUS fully addresses requirements for 100 kHz burst rate per IEC 61000-4-4, Edition 2 and 80% dip per IEC 61000-4-11, Edition 2. Portable unit monitors surge voltage and current at output terminals. It also monitors output of coupling unit and automatically switches connections according to coupling mode.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jul 20, 2010 Powered by single CR2032 Lithium 3 V battery, Model WTI-100 uses 3 ½ digit LCD to indicate temperatures from -58 to 230°F with accuracy of ±1.5°F and 0.1°F resolution. Stainless steel wall plate allows Model WTI-100 to monitor temperatures in walk-in freezers, indoor swimming pool areas, or general office environments.

Turck USA    Minneapolis, MN 55441
Jul 20, 2010 Measuring 36 mm with hollow shaft diameter up to 10 mm, F36 Series is designed without gears, making encoders completely insensitive to magnetic fields. OptoASIC technology enables resolution up to 16 bits for single-turn applications and 32 bits for multi-turn applications. Operating from -30 to 85°C, IP67-rated units are suited for drive engineering or medical technology applications.

Turck USA    Minneapolis, MN 55441
Jul 20, 2010 Equipped with WeldGuard(TM) protection, Q-pak®, BIM-UNR, and BIM-UNT Sensors are impervious to weld slag and splatter often accompanying MIG and TIG welding operations. BIM-UNR model mounts within C-groove cylinders, while BIM-UNT sensor mounts in T-groove dovetail or tie rod pneumatic cylinders, all without additional tools or accessories. Featuring IP68 protection rating, Q-pak uprox®+ factor 1 sensors offer extended range capabilities of 8 mm for all metals.