Daimer Industries Inc    Woburn, MA 01801
May 25, 2011 Powered by 2-stage, 60 Hz motor, Series XPH-5900IU can produce water-lifts of 100 in. with air flow up to 100 cfm. Units incorporate dual-inline heating system that reaches temperatures at/or below 210°F, and low-flow liquid management technology that allows cleaned upholstery to dry in approximately 1 hour. Machines are supplied with 20 ft suction hose and small maneuverable upholstery heads designed to reach under seats or into crevices in vehicles.

Power-One, Inc.    Camarillo, CA 93012
May 25, 2011 Featuring universal 85-264 Vac input range with PFC and zero-load operation, i-PWER(TM) Low Profile Modular Series delivers 1-6 fully isolated outputs, depending on model. Model LPM615, housed in 6-slot chassis, provides up to 1,500 W of power, while Model LPM409, with 4-slot chassis, delivers up to 900 W. Each output module is widely adjustable, offering continuous output coverage from 2-51 V. With 1U, 1.6 in. profile, power supplies feature high power density of 17.6 W/in.³

Larson Electronics, LLC    Kemp, TX 75143
May 25, 2011 Approved for Class 1, Div 1 hazardous locations, Model EPL-50-120x12-EHR contains incandescent lamp within slip ring type explosion proof housing, and is paired with cord reel holding 50 ft of SOOW 16/3 AWG explosion proof cord. Reel features spark proof ratcheting mechanism that prevents inadvertent ignitions of flammable atmospheres while cord is being wound. Designed to meet JC-580A federal specification, spotlight is suited for inspections and servicing work in large tanks or work areas.

Crydom    San Diego, CA 92154
May 24, 2011 DRA Series 3-phase DIN Rail Mounted Solid State Contactors are available in normal and motor reversing models with output ratings of 1 or 2 hp at 480 Vac and 4,000 Vac optical isolation. Featuring output ratings of ¼ hp at 90 or 180 Vdc, DC motor reversing contactors have isolation of 2,500 Vac. Integrated control interlock feature allows only off, forward, and reverse operation. Mounting on 35 mm DIN rail, all models are also offered with IEC 60947 ratings.

Aaeon Electronics, Inc.    Hazlet, NJ 07730-2496
May 24, 2011 NanoCOM-LN offers LVDS and analog video output in simultaneous and dual display modes, making available up to 384 MB of system memory for graphics engine. Measuring 3.31 x 2.17 in., it includes Intel® ICH8M chipset, solid-state disk, as well as four 32-bit PCI channels and five PCI-Express x1 channels for expansion. In addition, eight USB 2.0 ports enable use of external devices and peripherals. System also offers 3 channels of SATA 3.0 Gbps to support additional storage requirements.

CGW-Camel Grinding Wheels    Niles,, IL 60714
May 24, 2011 Featuring high concentration of diamond grit and solid steel body, CGW diamond wheels produce fewer sparks, no odor, and minimal material debris. They will not fracture during use, increasing safety, and consist of type 29 depressed center grinding wheels, type 1 notching/grinding wheels, and 16-20 in. combination cutting wheels. Intended for chop saws, stationary saws, gas saws, and rail cutting machines, each wheel type suits specific applications.

SL Power Electronics    Ventura, CA 93003
May 24, 2011 Comprised of 154 standard models, CENB (commercial) and MENB (medical) series offer 11 output power levels from 10-220 W and are designed to meet standby energy loss legislation. Products deliver output voltages from 5-48 Vdc and meet requirements of Energy Level V, CEC2008, EISA2007, and ErP Step 2. Wall Plug configurations will be available with interchangeable blade or regional fixed molded AC plugs, and all models come in desktop style with universal input.

Newport Corporation    Irvine, CA 92606
May 24, 2011 Model WEU-02 is wavelength extension unit designed to expand capability of femtosecond lasers. Enabling user to maintain fundamental beam for 2-photon imaging, unit's thumbwheel also allows selective splitting of beam to add pump-probe and multimodal capability. Thumbwheels are also used to independently control attenuation of beam, input to photonic crystal fiber, and output Stokes beams. Included 2-position slide controls let users narrow bandwidth to 3 nm around 800 nm pump.

Master Magnetics, Inc    Castle Rock, CO 80104
May 24, 2011 Rated at 65 lb pull, industrial-strength Neodymium Rotating Magnetic Hook is suited for hanging heavy equipment. Unit can swivel 360° and swing 180°, adapting to any position without repositioning. Hook securely holds cables, tools, wires, and other equipment in workshops, garages, warehouses, and contractor vans.

Micronor    Newbury Park, CA 91320
May 24, 2011 Using optical technique embedded in passive sensor and active controller connected via duplex fiber optic link, Model MR330 series measures absolute angular position from 0°-360° with 13-bit resolution at speeds exceeding 2,500 rpm. All-optical design suits long-distance position sensing, over hundreds of meters, and is not affected by ground loop problems. Immune to lightning, product is classified as simple apparatus and meets ATEX requirements for use in hazardous environments.

Microstar Laboratories, Inc.    Bellevue, WA 98004-3039
May 24, 2011 DAPtools v6.0, intended for DAP and xDAP data acquisition product lines, delivers full 64-bit native mode support. MSLACOM control panel configuration utility ensures correct elements for system are selected and installed automatically, depending on version of Windows® 7 system in use. Also included, DAPIO 64-bit API supports development using MS Visual C++, Visual C#, and Visual Basic .NET. DAPL 3000 software offers support for xDAP 7410 DAQ subsystem and sampling control features.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
May 24, 2011 Featuring 2-phase input and 39 mm width, DIN rail mount CSW series is designed to operate using 2 legs of 3-phase circuit. User-selectable hiccup or constant output protection is available to suit application, and fully enclosed housings are touch-safe. Operating from universal input of 185-550 Vac in both single- and 2-phase, 24 Vdc power supplies are available in 5 and 10 A versions. Additional features include full electronic protection, output overload, and short circuit protection.

Dectron Inc.    Roswell, GA 30076
May 24, 2011 With gas-phase air purification, electronically commutated motors, and energy recovery options, DRY-O-TRON® DK (indoor) and RK (rooftop) Series reduce energy expenditure of outdoor air compliances for ASHRAE Standard-62 IAQ standards. Variable hot gas reheat, electronic hot gas bypass, variable heat, and digital scroll compressor features ensure RH and temperature set point precision. Systems also support onsite or remote monitoring and/or controlling with Supervisaire® 16-bit MPU.

Saint-Gobain Abrasives, Inc.    Worcester, MA 01606
May 24, 2011 Intended for metal fabricating industry, Norton Vortex Rapid Finish Non-woven Right Angle Discs prepare surfaces before coatings/plating, perform light cleaning, and remove blemishes after welding stainless steel. Units feature thick nylon web for extended life and porous design for cool cutting. Type 27 Depressed Center discs are available in 4½ x 5/8 to 11 in. and 4½ x 7/8 in. sizes with aluminum oxide abrasive, and grit size of 100-120 with medium grade.

American Casting & Manufacturing Corp.    Plainview, NY 11803
May 24, 2011 Made with styrene or acetal plastic with stainless steel locking plunger, invasive species PSW-97 wire plunger style model seals with audible click. Self-locking and tamper-evident products, suited for boats, trailers, and equipment inspections and tagging, feature plastic seal supplied with lettering and numbering. Cut wires or spools of wire - 12 in., 3-ply galvanized (pre-inserted or loose) - of any length are available.

FlexLink Systems, Inc.    Allentown, PA 18106
May 24, 2011 Available in 3 widths of 85, 180, and 300 mm, respectively, Models X85X, X180X, and X300X are suited for handling products in production and packaging lines within fast moving consumer goods and healthcare industry segments. Model X85X has upper speed level of 120 m/min, while wider versions can run up to 80 m/min. Powered by IP65 rated drive units with food-grade oil, conveyors come in wash down, wipe off, and covered return chain versions.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 24, 2011 Designed for testing semiconductors, components, and materials, benchtop B2900A Series features voltage range of ±210 V and current ranges of ±3 Adc and ±10 A pulsed. Sourcing is precise and measurements are accurate with minimum resolution of 100 nV and 10 fA. Intuitive user interface is presented on 4.3 in. color LCD that supports graphical and numerical displays in single, dual, graph, and roll views. Available in 1- and 2-channel models, B2900A Series can archive 12,500 readings/sec.

ASCO (Automatic Switch Co., Valve Div.)    Florham Park, NJ 07932
May 24, 2011 Made of 316L stainless steel for maximum corrosion resistance, ASCO Harsh Environment Valves are available with 0.55 or 1.30 W coils as well as pressure ratings from 0-150 psi. Units feature high flow construction with 1.1 Cv pressure port and 1.4 Cv exhaust port. Offered in direct acting and pilot operated models with ¼ in. NPT, valves are suited for control panels in offshore applications as well as solar panels and PLC/DCS applications.

Eurocom Corporation    Nepean K2E 7R4  Canada
May 24, 2011 Eurocom Optimus performance-oriented business notebooks, based on Intel® Sandy Bridge Core i7, i5 and i3 CPUs, feature discrete NVIDIA® GT 555M graphics and Optimus(TM) technology. Built around Intel Huron River HM 65 platform, products include EUROCOM Fox 2.0 and Lynx 2.0 with respective 15.6 and 17.3 in. HD (1920 x 1080) displays. Both models support up to two, 2.5 in. storage drives (1.75 TB max), up to 16 GB DDR3 RAM, and WLAN and Bluetooth options.

Makita U.S.A., Inc.    La Mirada, CA 90638
May 24, 2011 Weighing 27.5 lb, 18 V LXT Lithium-Ion Cordless 7½ in. Dual Slide Compound Miter Saw (LXSL01) has 2 1/16 in. vertical capacity and will crosscut 11¾ in. at 90°. It miters 0°-47° left and 0°-57° right and bevels 0°-45° left and 0°-5° right. With portable design suited for room-to-room applications, saw is powered by Makita motor with 2,200 rpm max speed and direct-drive gearbox. Other features include 4 steel rail sliding system, 4 linear ball bearings, and electric brake.