Transcend Corp.    Orange, CA 92867
May 25, 2011 Available in 4, 8, and 16 GB storage capacities, Jet Flash 200 USB lets enterprises secure confidential and sensitive information to prevent unauthorized access and theft. Data is secured in 2 ways: 256-bit AES hardware-based encryption that meets FIPS standards, and JetFlash SecureDrive software that creates password-protected Private Zone. Measuring 70.0 x 21.0 x 8.1 mm, drive works with Hi-Speed USB 2.0 ports and offers respective max write and read speeds up to 5 and 17 MBps.

Haydon Kerk Motion Solutions    Waterbury, CT 06705
May 25, 2011 Featuring connector rated for up to 3 A that supports wire gauges from 28-22 ga, SplineRail(TM) Linear Actuator combines mechanical drive, guidance, and stepper motor actuator in single component. Size 17 single- or double-stack stepper motor provides 1.8° or 0.9° motor step angle. Actuator utilizes Kerk® precision-rolled lead screw, supported by bearings and contained within concentric aluminum spline. Programmable and RoHS-compliant, it is available alone or with wire harness assembly.

GlacialTech Inc    New Taipei 235, R.O.C.  Taiwan
May 25, 2011 Vega Series models GL-AR111AD and GL-AR111AN take 12 Vac/Vdc power source, use 12 W of power, and for both warm white or cool white light, emit over 400 lumens. Products have CRI of greater than 80 for warm white and greater than 70 for cool white light. Designed for indoor use, lamps integrate LED driver GP-LS10P-36 that minimizes heat generation and helps to save power. No UV or IR rays are emitted, and LED lamps are available in dimmable and non-dimmable versions.

Deco Lighting    Commerce, CA 90040
May 25, 2011 Suited for offices, hospitals, schools, and retail, SkyLid features diffusion panels that optimize light output and distribution without glare. Housing is constructed of cold rolled steel and aluminum, while optical chamber is finished with high-reflectance powder coat paint. Available in 2 x 2 and 1 x 4 sizes in both recessed and surface mount models, unit consumes 50 W and offers choice of warm to cool LED color temperatures. Dimming capability is optional.

Detectamet NA    Morgantown, PA 19543
May 25, 2011 Intended to help prevent and avoid foreign body contamination within food and pharmaceutical industries, Detectathene Super XD Plastic combines engineering polymers plus food-safe, x-ray visible/detectable additive. Base polymer properties and characteristics include abrasion resistance, low friction, impact resistance, and cold temperature (-260°C) resistance. Material comes in various sheet sizes and gauges as well as in 1 m long, semi-finished, round bars.

Buehler, Ltd.    Lake Bluff, IL 60044
May 25, 2011 MicroMet 6000 Series Vickers/Knoop dead-weight hardness testers integrate all necessary functions and require minimal training to use. User interface combines touchscreen LCD for set-up and data entry with hard-switch buttons for daily operation, while tabbed menu structure let user access any settings within 3 clicks. In addition to 6 turret positions, features include USB ports and integrated digital camera. Custom optics and LED illumination deliver clear image of test surface.

Thermo Electron Corporation / Molecular Spectroscopy    Madison, WI 53711-4495
May 25, 2011 Antaris Industrial Gas System monitors dozens of gases simultaneously, including methane, and can scan at speeds up to 5 Hz at 0.5 cm-1 resolution. Based on Nicolet 6700 Fourier transform interferometer, system is operated using RESULT software and has tools for routine gas analysis, method development, method transfer, operation setup, and data analysis. Unit is configurable with components such as detectors and gas cells, and is available in rack-mount and table-top configurations.

Seward Limited    Worthing BN14 8NL  United Kingdom
May 25, 2011 Stomacher® 80 Biomaster paddle blenders feature strainer bags that are gamma irradiated sterile and allow individual processing of large numbers of tissue samples for primary cell preparation. Included bags feature strainer element with 0.5 mm pore size that generates homogenous cell suspension. This allows cells to pass through pores of central straining matrix and prevents contamination with undigested extracellular material, which can block pipettes.

Essemtec Ag      Switzerland
May 25, 2011 Able to store 336, 13 in. dia reels, Tower-XL offers fully automatic, modular, and secure storage system for SMD components. It helps electronics manufacturers simplify logistics by installing near pick-and-place machines, enabling operators to store components and retrieve them from stock when needed. Access time for each reel is less than 12 sec, and included stock management software features modules for job planning and tracking of MSL-classified components.

Axiomatic Technologies Corp.    Mississauga, ON L4Z1Z8  Canada
May 25, 2011 Extending machine control networks, AX022400 interfaces with 2 fully independent universal command inputs that are selectable as voltage, current, resistive, frequency, RPM, PWM, or digital types. Solution also provides 2 independent, software-controlled outputs up to 3 A that are selectable as proportional current, hotshot digital, PWM duty cycle, proportional voltage, or On/Off digital types. With one provided voltage reference, power supply input is 12, 24, or 48 Vdc nominal.

Malvern Instruments Inc.    Westborough, MA 01581
May 25, 2011 Telephoto lens, intended for Insitec laser diffraction process systems, enables on-line measurement of larger particles. By combining 2 different focal length lenses, design concentrates measurement range with upper limit of 2500 µm into lens that measures 160 mm long. This ISO13320-compliant lens, suitable for wet and dry measurements, works with all Malvern Process products, and its design promotes stability and alignment, vibration tolerance, and robustness to temperature.

Newport Corporation    Irvine, CA 92606
May 25, 2011 Laser µFAB tabletop laser microfabrication workstation is designed for use in both additive and subtractive processes. It can be configured for use with femtosecond laser oscillators, amplifiers, OPAs, and other types of lasers in visible to NIR range. Integrating precision stages covering 100 mm in X and Y axes and 4.8 mm in Z axis, with resolution of 50 nm, workstation also has top plate with holder that accommodates slides, cover slips, wafers, or large samples.

Larson Electronics, LLC    Kemp, TX 75143
May 25, 2011 Operating on 120 Vac or 12 Vdc, 90 W Model PML-90LED-DP-120 utilizes nine 10 W Seoul Z-Power LED emitters to produce 8,100 lumen beam capable of reaching 2,400 ft in length and 140 ft in width. IP68-rated unit mounts to vehicles, buildings, or any flat surface using 4 in.² mounting plate. Solid polycarbonate handle incorporated into adjustable mounting bracket enables adjustment of light that stays in place once set. When using included transformer, light can also operate with 9-50 Vdc current.

Rice Lake Weighing Systems    Rice Lake, WI 54868
May 25, 2011 Integrated directly within rail, RailBoss(TM) enables scrap yards and agricultural operations to install their own in-house railroad scale for stationary weight verification of rail cars and other non-Legal-for-Trade needs. RailBoss pairs with 920i® Programmable Indicator/Controller and RailBoss software to offer capacities up to 320,000 lb. Scale is available in either 8 section full-draft systems or 4 section double-draft models.

Holophane    Granville, OH 43203
May 25, 2011 Available in 4 styles with flat glass optics, Euro-styled GlasWerks® LED Series create contemporary look in outdoor environments. Fixtures feature LED board with directional optics in multiple arrangements, and optical assembly consists of thermal resistant flat glass panel mechanically confined to formed aluminum door frame. Molded optical interface distributes light from LED module, and LED boards are available for symmetrical or asymmetric full cutoff distribution.

Larson Electronics, LLC    Kemp, TX 75143
May 25, 2011 Producing 12,600 lm while drawing 140 W at 8.4 A from 12 V electrical system, HIDTH-66X2-70W features 2 IP67-rated HID lamps that are attached via trunnion and bracket mount and can be adjusted. Trailer hitch mounting system utilizes stability of parked vehicle or heavy equipment to provide solid placement of tower in areas where conditions would otherwise cause problems such as swaying/tipping. Adjustable from 3-8 ft tall, tower assembly is 12/24 Vdc multi-voltage capable.

Larson Electronics, LLC    Kemp, TX 75143
May 25, 2011 Drawing 5 A on 12 V, 60 W Model LEDP10W-60E utilizes 6 CREE MC-E LEDs to deliver 5,160 lumens from 11 x 2.5 x 3.5 in. form factor. Watertight unit is IP68-rated and operates on input voltages from 9-46 Vdc. Power cord is terminated with standard watertight connection. Featuring integrated pulse width modulation and thermal management, spreader light will operate continuously for 5.5 years, offering long lasting replacement for standard 500 W quartz deck light.

Larson Electronics, LLC    Kemp, TX 75143
May 25, 2011 Used when traditional power sources are unavailable/undesirable, MGS-DC-30KVA-480-220-110 safely converts 480 Vac single- or 3-phase current to 240 and 120 Vac. This lets operators in industrial/commercial environments tap into high-voltage power sources and power their equipment independently of work area. Completely weatherproof, heavy-duty power transformer substation includes fully potted transformer, weatherproof GFCI outlets, and panel box. Skid mounting facilitates transport.

Advanced Micro Controls, Inc.    Terryville, CT 06786
May 25, 2011 Available in single-turn and multi-turn versions, NR25 Series provides up to 30-bit resolution. Resolver-based units come in 2.5 in. diameter IP67-rated package with PoE as standard. PC-based GUI is included to set IP address, position resolution, counting direction, velocity format, and preset value through Ethernet network. For troubleshooting, encoders have LEDs that display diagnostic information including module status, network status, and link/activity status.

Grieve Corporation, The    Round Lake, IL 60073-2898
May 25, 2011 Used for processing pallets of PVC parts on mandrels, electrically heated No. 874 features 42 x 84 x 15 in. workspace and 40 kW installed in Incoloy sheathed tubular heating elements. Zones include 2 ft long open belt loading zone, 7 ft long insulated heat zone with recirculated airflow, and 4 ft long open unloading zone. Along with 5 in. insulated walls and aluminized steel interior/exterior features incldue 4,200 cfm, 3 hp recirculating blower and 325 cfm powered forced exhauster.