ClearSpeed Technology, Inc.
San Jose, CA 95128
Sep 08, 2008 Advance(TM) e720 Accelerator Board is PCIe Type II mezzanine card designed specifically to fit within HP BladeSystem c-Class server blades. Targeting technical computing applications, such as computational electromagnetics (CEM), financial analytics, and life sciences, it delivers 96 GFLOPS of 64-bit, double precision performance. Unit requires no additional space and consumes minimal additional power, maximizing compute density of BladeSystem c-Class architecture.

Emerson Network Power
St. Louis, MO 63136
Sep 08, 2008 With dual Cavium OCTEON(TM) PLUS sixteen-core processors, ATCA-9305 enables network equipment to handle data plane and control plane applications on same hardware. It features RLDRAM for deep packet inspection in telecom networks and PCI Express x4 port lane for design of custom rear transition module with storage. Blade is suited for data plane elements in applications such as 4G/LTE wireless, WiMAX, and IPTV as well as for control plane applications, and network gateway and edge functions.

Emerson Network Power
St. Louis, MO 63136
Sep 08, 2008 Combining two 2.13 GHz quad-core Intel® Xeon® processors and redundant 10 GbE support, ATCA-7350 ATCA blade delivers performance and flexibility required by server-type communications network elements. It supports media servers in IPTV and IP Multimedia Subsystem broadband networks, and features dual hot-swappable and RAID-capable on-board disk drives. PICMG 3.1-compliant fabric interface provides two 10 GbE interfaces for applications requiring high network throughput in backplane.

Advantech Automation Corp.
Cincinnati, OH 45240
Sep 08, 2008 Offered in 6 models, ARK-3380 B1 Series is powered by Intel® Pentium® M or Celeron® M processor and features 9-pin DIO connector capable of GPIO programming and up to 3 USB 2.0 interfaces. It has operating humidity of up to 95% at 45°C, tolerates temperature range between -20 and 60°C (with Compact Flash) and 0-45°C (with HDD), and withstands 5 Grms vibration and 50 G shock (both with Compact Flash). Unit offers choice of display interfaces with VGA, DVI, and LVDS output.

Flir Systems, Inc.
North Billerica, MA 01862
Sep 08, 2008 ThermaCAM® GasFindIR CO(TM) detects carbon monoxide utilizing cooled InSb detector and optical systems that are tuned to very narrow spectral infrared images for detection of very small leaks. Three integration modes, Normal Scene, Cold Scene, and Hot Scene can be user-selected at 60 Hz. Camera can be battery operated for 8 hr of continuous use, connected to ac power for round-the-clock use, or connected to 12 V power for vehicle-based inspections.

ClearSpeed Technology, Inc.
San Jose, CA 95128
Sep 08, 2008 Delivering 96 GFLOPS of double precision performance, Advance(TM) e710 accelerator board is suited for users with technical computing applications, such as computational electromagnetics (CEM), financial analytics, and life sciences. Able to accelerate dual socket, quad-core server by over 50% for LINPACK benchmark and up to 100% for Black Scholes-related workloads, floating point accelerator unit can be integrated into rack servers or workstations via PCIe interface.

Miller Fall Protection
Franklin, PA 16323
Sep 05, 2008 Miller Twin Turbo(TM) Fall Protection System incorporates Twin Turbo mounting brackets with 2 TurboLite Personal Fall Limiters (PFL) for 100% tie-off. Able to swivel in multiple directions, 1.9 lb PFLs provide 6 ft working capacity lifeline and attach directly to harness back D-ring for mobility. Limiters feature engineered webbing for abrasion resistance and high-strength, impact-resistant nylon housing.

Pacline Conveyors
Buffalo, NY 14207
Sep 05, 2008 Designed to conserve plant space, powered C-250 Over/Under enclosed track conveyor system has support columns that allow materials to flow into area and give maintenance personal access to existing machines. Carrier design accommodates Cardwell 2300-DJ Slack Adjuster, and lift assist device at each workstation reduces physical requirements for operators. Other features include safety zone operation, touchscreen control panel, safety relays, and foot switches.

Electrone Americas Ltd.
Boca Raton, FL 33431
Sep 05, 2008 Offering bi-directional communication across RS232 serial connection, RoHS-compliant Model 720 S includes onboard memory, enabling it to provide standalone or offline capabilities. Keypad has 17 keys, which can be customized with special colors or legends. Small enough to be mounted in vehicles, Model 720 S offers compact HID for vehicle tracking and management devices. It is also suitable for security applications, such as identification and entering PIN numbers.

JM Science, Inc.
Grand Island, NY 14072
Sep 05, 2008 Available in 2 channel configurations as well as component of semi-automated or fully automated KF system, AQUACOUNTER® Karl Fischer Coulometric Titrator (AQ-2100S) offers detection range of 2 ppm to 10%. Color LCD screen provides all information required by analysts, and real-time titration curves can offer assistance when developing new methods. Replaceable membrane combines precision of ceramic frit with facilitated maintenance of fritless system.

VEGA Controls Ltd
West Sussex RH15 9NF  United Kingdom
Sep 05, 2008 Suited for water/wastewater and bore hole level measurement, VEGAWELL 51 suspended hydrostatic level transmitter features flush-ended design with CERTEC sapphire ceramic diaphragm that prevents clogging even when suspended solids are present. Its 22 mm slim stainless steel body facilitates installation and removal in confined spaces, and PE-reinforced cable suspension fixings include sliding clamp or 1 in. BSP locking nut. Standard ranges cover 0-100 mbar up to 10 bar.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Sep 05, 2008 Series TSWB Digital Temperature Switch has high and low set point for controlling water temperature; low set point can either be manually or automatically reset. Control also has conductivity level probe input, which supplies 12 Vac to probe to check for low water condition. Unit includes 3 relay outputs which can be assigned in field to high water temperature set point, low water temperature set point, or low water level input.

Harco Mfg. Co.
Newberg, OR 97132-7071
Sep 05, 2008 Designed to replace locomotive's exhaust silencer, Harco Eliminator sits directly above engine and is not visible from exterior of locomotive. Unit is unaffected by vibration and prevents clogging, which would hinder effectiveness in reducing particulate matter. Measuring 133 x 74 x 77 cm, Eliminator DOC is designed for retrofit applications on locomotives that are out in field. It is not customized for each application, but can be adjusted to fit each engine.

Manncorp
Willow Grove, PA 19090
Sep 05, 2008 Suitable for prototyping, short runs, or full production, Economy Turnkey Line features 3 main components. MC384 pick-and-place machine, offering speeds of 4,000 cph, includes 128-lane feeder capacity and ability to mount 0201s, CFPs, and µBGAs in 14.5 x 13.4 in. placement area. Model 5500 Stencil Printer has independent, pressure-controlled dual squeegees and pneumatically controlled stencil frame. With 5 independent zones, CR5000 reflow oven attains lead-free-ideal temperatures to 300ºC.

Anver Corp. - Anver.Com
Hudson, MA 01749
Sep 05, 2008 Used for loading and unloading operations, VT Series lets one person handle four 5 gal pails (50 lb each) at once without manual lifting. Unit can be integrated with ceiling mounted gantry crane and is available with range of vacuum pad attachments. Along with 4 pliable bellows-style suction pads that provide soft touch and secure hold under vacuum, product features ergonomic handle with up/down controls that can be adjusted to match user's hand strength.

CS Unitec, Inc.
Norwalk, CT 06850
Sep 05, 2008 With blade stroke of 2 3/8 in., Model 5 1212 0050 will cut 24 in. dia pipe at 90° in one pass. Unit features 1.5 hp air motor that uses 51 cfm air volume at 90 psi air pressure. Certified to ATEX regulations EX 112 GcT5, saw can operate in hazardous atmospheres and environments classified as EX Zone 2. Portable tool uses range of heavy-duty blades from 8-37 in. long, which are available in HSS (M2) and HSS-SL with Molybdenum for cutting carbon steel, SS, and hard alloys.

Riegl USA, Inc.
Orlando, FL 32819
Sep 05, 2008 Featuring pulse repetition rates up to 300 kHz, V-Line 3D Laser Scanners have multiple target capacity with unlimited number of targets for performance in dust, rain, snow, and fog. Units include GPS, LAN, WLAN, and USB interfaces and are suitable for both stationary and mobile terrestrial scan data acquisition. Designed to meet OSHA regulations and ANSI Class 1 eye safe requirements, scanners feature invisible beam that will not distract motorists, workers, or pedestrians.

SICK, Inc.
Minneapolis, MN 55438
Sep 05, 2008 OD Precision connects 3 sensors to one controller, reducing amount of required hardware and facilitating measurement of X/Y/Z axes in quality control operations. Able to be used in stand-alone mode, product requires no software, offers 0.02 micron resolution, and uses CMOS technology in detecting targets that are reflective or have dark remission characteristics. Sensor can verify machining tolerances and confirm parts quality as well as positioning.

Arcos Industries, LLC
Mount Carmel, PA 17851
Sep 05, 2008 Arcos 347 stainless steel electrodes are manufactured for high temperature welding applications. Bare version of ER347 welds chromium-nickel base metals of similar composition stabilized with columbium or titanium, and can be used for welding base metals 302, 320, and 347. Developed for 302, 304, 321, and 347 welding grades, covered version of E347 is utilized where conditions require maximum resistance to corrosion and where weld metal is subject to temperatures above 700°F.

nLight Photonics
Vancouver, WA 98665
Sep 05, 2008 Based on precise algorithms that account for all reflections in system crucial for accurate laser and ASE light source simulations, LIEKKI(TM) Application Designer v4.0 suits high power applications providing platform for simulating/optimizing fiber amplifiers and lasers. It features multimode analysis of bent fibers, variable step size in transient analysis for simulation of low repetition rate pulsed lasers/amplifiers, and design wizard for creating designs and running simulations.