Andor Technology Ltd.    South Windsor, CT 06074
May 10, 2010 Used for in-line electroluminescence and photoluminescence inspection of photovoltaic (PV) cells, iKon-M PV Inspector optimizes throughput via readout speeds up to 5 MHz combined with Dual Exposure Ring Mode. Integral 1,024 x 1,024 back-illuminated deep depletion sensor array offers greater than 90% Quantum Efficiency beyond 800 nm and incorporates Fringe Suppression Technology(TM) to minimize fringing effects in NIR. Also, thermoelectric cooling down to -70°C minimizes darkcurrent.

Codima Inc.    Denver, PA 17517
May 10, 2010 Codima Toolbox v6.9 provides IT Professionals one point of access to reports that deliver critical information and traffic priority analysis for diagnosing network performance to better manage data and VoIP networks. Along with support for Windows 7, software includes Report Manager for harvesting network information and creating visual reports. Other features include Device Editor, Protocol/Node History Managers, and Global Alarm System.

Laird Technologies    Chesterfield, MO 63017
May 10, 2010 Operating in 4.9-5.875 GHz band, HDDA5W HD Series(TM) includes 4 models with 29 or 32 dBi gains and single (horizontal or vertical) or dual (horizontal and vertical) polarizations. Each point-to-point backhaul antenna meets ETSI EN 302.326-3 DN1-DN5 and EN 300 833 Class 1 specifications and is available with optional fiberglass radome for additional environmental protection. Uses include cellular backhaul systems, OFDM systems, and public safety communications systems.

ADLINK Technology Inc.    Irvine, CA 92618
May 10, 2010 Based on 1.66 GHz Intel® Atom(TM) N450 processor, CoreModule® 740 consists of PC/104-Plus module with integrated memory and graphics controllers. Unit combines ISA, IDE, serial, and parallel ports with onboard video, 1 GB soldered RAM, USB 2.0, and PCI bus. Ampro by ADLINK(TM) Extreme Rugged(TM) design enables operation at temperatures from -40 to +85°C, vibration up to 11.95 Grms, and shock up to 50 Grms. With panel interface and legacy CRT support, SBC is suited for outdoor signage applications.

Maxon Precision Motors, Inc.    Burlingame, CA 94010 1304
May 10, 2010 Model EPOS2 70/10 drives DC brush motors with encoders or brushless EC motors with Hall sensors and encoders, from 5-700 W power. It includes Step/Direction Mode for motor movement, Master Encoder Mode for use in electronic gearing applications, and Interpolated Position Mode for synchronously running path specified by interpolating points. Regulation Tuning helps adjust current, velocity, or position regulation. Unit can be controlled with CAN Master or by PC via USB or RS232.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
May 10, 2010 Providing control of Digital Micromirror Device, 0.55 XGA Chipset enables engineers to utilize DLP technology to create binary light patterns. Chipset supports up to 5,000 Hz binary and 500 Hz grayscale pattern rates. It can also accept input frame rates of 8 bits per RGB color at 60 Hz XGA for video imaging. With user configurable sync output and trigger input for communication to external sources, chipset is suited for machine vision, 3D scanning, and 3D optical measurement.

Hemoco    Hamme   Belgium
May 10, 2010 With Lansweeper 4.0, users can do complete inventory of Windows network without need to install agent on all workstations or servers. Program offers Windows event log error scanning and alert mailing, hardware and software change detection, over 200 built-in reports, and Active Directory integration. Using software, administrators and helpdesk staff can manage all assets using intuitive web interface where they can define custom reports, actions, and scripts.

RedPrairie Corp.    Waukesha, WI 53186
May 10, 2010 With functionality for multi-compartment load planning, Transportation Management and Fleet Management v2010.1 allows users to apply planning characteristics to individual sections of truck or other equipment. Program understands what environment, such as frozen, refrigerated, or dry, is required for individual products within multi-compartment vehicle. Functionality accommodates fact that certain products require specific environments to arrive at destinations in optimal condition.

ERICSSON INC.    PLANO, TX 75024
May 10, 2010 Designed to power 100 W boards in 48 V Information and Communication Technology applications, PKB-A series delivers 30 A or 125 W with high efficiency throughout operating range. There are 2 models within PKB 4000 A 48 V input (38-72 V) platform: PKB 4111A (5 V/25 A) and PKB 4910A (3.3 V/30 A). Both are available for SMT and through-hole assembly use. At nominal voltage, models respectively deliver typical efficiencies of 92.3% and 91.0% at full load.

Alliance Plastics    Erie, PA 16510
May 10, 2010 Made of Nylon 6.6, Nuts, Screws, and Bolts are resistant to oils, rust, corrosion, abrasion, and chemicals. Nylon also provides vibration resistance, as well as electrical insulation due to its dielectric constant. Screws and bolts are offered in several head types including binder, round, flat head, fillister, hex, socket, countersunk, and pan head. All threads are imperial with slotted and Phillips availability.

Alliance Plastics    Erie, PA 16510
May 10, 2010 Soft touch handles and knobs include 3- and 5-lobed knobs as well as low- and high-profile soft touch knobs that are available in male, female, and thru-hole versions. TPE rubber overlay on handles and knobs promote grip and comfort while also providing impact resistance. Glass-filled polypropylene base material lends to strength and stability.

Alliance Plastics    Erie, PA 16510
May 10, 2010 Available in yellow, blue, green, red, and grey, as well as standard black and natural versions, Colored Nylon Cable Ties are suitable for lot identification purposes. RoHS-compliant parts are manufactured from 94V-2 Nylon 6/6 and have service temperature of -40 to 185°F. Cable ties are also UL/CSA approved and comply with MS-3367 and MIL S 23190E standards.

Edmund Optics    Barrington, NJ 08007
May 10, 2010 Deformable Mirrors correct optical aberrations through wavefront manipulation and control. Suited for use in combination with wavefront sensors and real-time control systems in adaptive optics, one specific mirror has 32 radially packed actuators - more than 10 µm (typically 14 µm) of actuator max stroke. Products also help reduce optical noise and meet demands in tabletop applications as well as OEM integration.

Online Development Inc.    Knoxville, TN 37920
May 10, 2010 Minimizing risks and complexities, cATM-BLY90 facilitates migration of legacy ABB Bailey Infi90 or Network 90 DCS (Distributed Control System) to ControlLogix PACs and FactoryTalk View applications from Rockwell Automation. Module installs in ControlLogix chassis and features GUI to aid exchange of data. Once Bailey Infi90/Network 90 system data is available within ControlLogix PAC, Rockwell Automation applications can be used for visualization of data, alarming, and other functions.

Mokon    Buffalo, NY 14207
May 10, 2010 Available in air-cooled and water-cooled versions, Iceman portable chiller meets process cooling requirements to 5˚F. Tandem compressor arrangement offers energy efficient design during changing cooling requirements, and microprocessor-based controller provides compressor anti-cycling and lead lag, ensuring equal run time of the 2 compressors. Scroll compressor technology provides quiet operation and refrigerant and process fluid loops are constructed of non corrosive materials.

Brennan Industries, Inc.    Cleveland, OH 44139
May 07, 2010 Standard-Duty Pipe Clamps, available for pipe sizes up to 2 in. OD, are suited for machine/tool applications and for instrumentation piping. Available for pipes with up to 8 in. OD, and in weld-plate and channel-mounting designs, Heavy-Duty Pipe Clamps are used for trench piping layouts exposed to various weather conditions. Both styles have 4-rib design, prevent vibration transmission pipe-to-frame and frame-to pipe, and support pipe in vertical/horizontal directions.

Brand Hydraulics    Omaha, NE 68106
May 07, 2010 With Model LEFC, flow can be adjusted proportionally with solenoid rather than manually. Orifice spool proportionally opens as current through solenoid increases, thus increasing flow out of control flow port. Valve features precision ground, heat treated spool; diamond lapped spool bore; and optional manual override when electrical power is lost. Standard 3-port model allows for pressure compensated flow out of 2 ports.

Lenze AC Tech Corp.    Uxbridge, MA 01569
May 07, 2010 Measuring 104 x 130 x 34 mm, EL 103 HMI Terminal features touch-sensitive display with LED backlighting; Ethernet, USB, and CAN interfaces; and SD card slot. Unit requires no fans or batteries for buffering real-time clock and uses 5 W. Based on XScale processor, terminal runs Windows CE and is available with 32 MB Flash and 64 MB RAM memory. It can be optionally equipped with soft PLC including maintenance-free UPS for storing residual PLC data.

Brand Hydraulics    Omaha, NE 68106
May 07, 2010 Nominally rated for 0-10 gpm and 4,000 psi, LV22 Series is designed primarily for loader market, but is suitable for any application where control of 2 separate functions is required. Unit features adjustable internal relief from 1,000-4,000 psi with standard setting of 2,000 psi. Spool actions include spring centering, detent, friction detent, and fourth position float. Joystick or individual enclosed handle options are available.

3M    St. Paul, MN 55144
May 07, 2010 Suited for use in body shops, 3M Dirt Trap Protection System provides complete paint booth solution that traps dust, dirt, and overspray to reduce defects in paint jobs. Adhesive-backed material is applied to wall and floor surfaces, and clear film protects lights and windows. Once material fills with debris, its removed and replaced. Applied onto walls and floors with magnetic dispenser, material allows installer to reposition during installation, which can take less than 2 hr.