GAO RFID Inc.    Toronto   Canada
May 11, 2010 With max read distance of 7 m and writing range up to 4 m, Model 246002 performs wireless transmission and conducts data collection, management, and transfer. Portable reader is compatible with ISO 18000-6b, EPC Class 1 Gen 1 and Gen 2, and ISO 18000-6c compliant transponders. Waterproof and dustproof, unit is suitable for industrial manufacturing, mobile data collection, and supply chain systems in warehousing, distribution, and shop floors.

OptiXtal, Inc    Philadelphia, PA 19143
May 11, 2010 Designed to handle 5 A max, 5F SuperXcaps(TM) feature ESR rating of 70 mW and are contained in flexible ultra-thin pouch for use in cell phones, battery operated power tools, and wireless energy harvesting devices for capture of motion, light, and strain measurement. Once battery runs down to point where it can no longer generate sufficient voltage for start up, SuperXcap can be called upon to pull remaining charge from battery and deliver it with voltage needed for high power bursts.

Volvo Penta Of The Americas, Inc.    Chesapeake, VA 23320
May 11, 2010 Coupled to 13 L marine diesel engine, IPS1050 Inboard Propulsion System generates equivalent of 1050 hp, suitable for workboats, passenger ferries, and patrol boats up to 30 m and 40 knots. System is available as double, triple, or quad engine installation with forward facing and counter-rotating propellers. Acceleration and shifting are done with twin, single lever controls. Joystick provides direction control, while Dynamic Positioning System holds boat's heading.

IRIDEX    Mountain View, CA 94043
May 11, 2010 In addition to graphical touchscreen interface that facilitates operation, IQ 532(TM) features dual port laser output and connectivity that permits exchange of multiple delivery devices with one touch. This 532 nm laser system is suited for use by ophthalmologists to treat sight-threatening eye diseases as well as otolaryngologists to correct types of conductive hearing loss.

Teradata Corporation    Dayton, OH 45342
May 11, 2010 With interface and workflow tools that promote efficiency and usability, Demand Chain Management (DCM) Release 4 provides foresight for ensuring effective launch of new products. Forecasting analytics at store-SKU level and ability to cost-effectively plan and execute supply chains enable retailers to plan for, predict, and meet consumer demand. Also included, Intelligent Product Introduction module determines best reference item/combination at store levels to support new product introductions.

Thermotron Industries, A Venturedyne, Ltd. Co.    Holland, MI 49423
May 11, 2010 To meet demands from eco-friendly battery development industry, Battery Test Chambers help determine/confirm product safety, longevity, and performance under extreme conditions. Each chamber can simulate environmental conditions of battery storage, shipping, and end use. Designed to meet IEC, JIS, UL, IEEE, UN, USABC, and Freedom Car specifications, Ethernet-compatible and touchscreen-operated chambers can control temperatures from -70 to +180°C and humidity levels from 20-95% RH.

Thermotron Industries, A Venturedyne, Ltd. Co.    Holland, MI 49423
May 11, 2010 Air cooled and compatible with environmental test chambers, Model DSX-12000 supports payloads up to 1,500 lb and offers velocity up to 115 ips. Shaker features 16 in. dia magnesium armature that produces acceleration levels up to 120 g, and dynamic centering system with optical sensors that ensures armature remains centered during travel. DSX-12000 is controlled by VCS-3200 Vibration Control System, which features over 85 dB of dynamic range and selectable resolution up to 3,200 lines.

Eyasco, Inc.    Aptos, CA 95003
May 11, 2010 Portable, fully-automated QuB can be deployed to remotely monitor resources and collect data for watershed, flood protection, agriculture, or land use purposes. It can accommodate wide variety of sensors, runs on either AC or DC power, and can be configured to power on/off when only specific measurements are required. Featuring built-in communications and data management capabilities, system can be networked and integrated with SCADA systems.

Bliley Technologies, Inc    Erie, PA 16508-0428
May 11, 2010 Available in package measuring 2.5 x 2.0 mm, T107A temperature compensated, voltage controllable crystal oscillator suits GPS, mobile communications, WiMAX, base station, networking, and industrial electronic applications. RoHS compliant product offers wide range of performance options with frequencies from 15-40 MHz. Unit is configured for high-density surface mount designs, as well as automated assembly.

Brand Hydraulics    Omaha, NE 68106
May 10, 2010 Combining functionality of Series 36-38 stack valve with flow control of EFC valve, Model 36EFC allows users to proportionally control input flow to stack valve in one complete package. System features precision ground, heat-treated spools; diamond lapped spool bore for consistent spool fit; O-ring ports to eliminate leakage; and pilot cartridges that assure positive force to shift spool. Model 36EFC is adaptable to automated circuits for 4-way directional speed control.

Canfield Connector    Youngstown, OH 44514
May 10, 2010 Featuring all-encapsulated body covered by metal housing, Series 8E IP67-rated linear actuator magnetic sensor is resistant to shock and vibration and operates over -10 to +70°C range. Switch is available in reed or electronic versions, and electrical connection is made via 9 ft PVC or 8 mm quick connect male pigtail. Mounting styles are available for tie rod or round type linear actuators, and size of sensing area depends on size and strength of magnet and thickness of cylinder wall.

Brand Hydraulics    Omaha, NE 68106
May 10, 2010 Featuring precision ground Iosso plated spool, 6-port Model MS6 come standard with manual handle and 2-position detent that holds spool in either active position. Both ports on top of valve serve as inlet and outlet while ports on either side are plumbed into 2 separate circuits. With O-ring ports to eliminate leakage and standard polypak seals, unit allows up to 45 gpm out of either side ports while other set of side ports are closed.

Lenze AG      Germany
May 10, 2010 Featuring selection of I/O compound modules for connecting digital and analog signals, I/O System 1000 offers modules for connecting thermocouples as well as modules that provide counters and relays or SSI interface. Decentralized solution also offers module with 2 or 4 digital outputs, with each capable of supplying 2 A current. Connection levels and electronics are designed in isolated and modular manner, and digital output modules include one module with 2 integrated relays.

Mettler Toledo, Inc.    Columbus, OH 43240
May 10, 2010 By weighing each part before and after coating process, Excellence XA Balances calculate mass of layer, and can be connected to PC with Direct Balance software for calculations on Excel spreadsheet. For various counting applications, balances utilize piece counting application built into XA firmware, which accommodates reference weighing and statistics. Traceability is ensured through ID entry via alphanumeric touchpad or barcode reader and printer connected via RS232 or Bluetooth interface.

Accu-Sort Systems, Inc.    Telford, PA 18969 1196
May 10, 2010 When equipped with Side-by-Side Detection software, AccuVision® AV6010 camera barcode system measures height of side-by-side packages, detects outer edges of items, and reads barcodes to determine if 2 packages are present. Software also allows exclusion of items based on barcodes entered into system's memory, which prevents false positives in case of open totes. Scanner and software minimize mis-shipments and eliminate need for manual detection and handling of closely spaced cartons.

ADLINK Technology Inc.    Irvine, CA 92618
May 10, 2010 Based on Intel® Core(TM)2 Duo P8400 processor, Model EOS-1000 provides 4 independent Power over Ethernet ports with data transfer rates up to 4.0 Gb/s. Auto detection function ensures compatibility with both PoE and conventional non-PoE devices. While in operation, EOS-1000 can tolerate vibrations up to 5 G. Measuring 7.8 x 6.5 x 3.3 in., system includes 2 RS-232/485 ports, 4 USB ports, 32 isolated digital lines, and both HDD and CompactFlash data storage options.

ADLINK Technology Inc.    Irvine, CA 92618
May 10, 2010 Powered by 1.66 GHz dual- or single-core Intel Atom processor, ReadyBoard(TM) 740 features ICH8M chipset, on-board SSD, and Broadcom Crystal HD H.264 video decoder. One SO-DIMM accommodates up to 2 GB 667 MHz DDR2 RAM, and optional power protection module meets demands of in-vehicle power environments. Along with networking and I/O capabilities, PCI-104 SBC offers range of graphics options. It suits applications in harsh environments that require high-end video performance.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 10, 2010 Offering real-time measurements, InfiniiMax III Probing System is available with 4 probe amplifier models with bandwidths from 16-30 GHz. Range of probe heads allows connection using browser, zero insertion force tip, 2.92 or 3.5 mm SMA cable, or solder-in tips. InfiniiMax III browser uses crisscross blade grounding system for low inductance grounding, poly-iron wrap of coax tips to minimize standing waves, and very-low parasitic replaceable resistor tips to achieve 30 GHz performance.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 10, 2010 Available in 10 models ranging from 16-32 GHz, Infiniium 90000 X-Series Oscilloscopes are bandwidth upgradable and offer more than 40 measurement-specific application packages, including jitter, triggering, measurement, and analysis tools and full compliance certification test suites. Units feature low noise floor of 2 mV at 50 mV/div, 32 GHz; low jitter measurement floor of ~150 femtoseconds; and 2 Gpts memory.

Delcam USA    Salt Lake City, UT 84111
May 10, 2010 Available in 64-bit version for 5-axis and high-speed machining, PowerMILL 2010 optimizes user productivity by extending use of background-processing and multi-threading technologies. Optimized layout of toolpath-creation forms help users find commands they need, while giving experienced operators logical access to advanced options. Program also includes series of strategies for roughing and finishing of corners, giving smooth clearance of these areas.