GL Communications Inc.    Gaithersburg, MD 20877
May 12, 2010 Offering PC-based Ethernet/IP BERT and throughput test tool, PacketCheck(TM) is suitable for analyzing 10 Mbps, 100 Mbps, and 1 Gbps LANs and WANs. Traffic generation mode can duplicate packet traffic as it occurred at particular Ethernet interface. Able to test throughputs up to 800 Mbps, application generates multi-stream Ethernet/IP/UDP traffic and measures end to end performance such as Byte Error Rate, Total Packets, Packet loss, Out of Sequence Packets, and Errorred Packets.

Beijer Electronics, Inc.    Schaumburg, IL 60173
May 12, 2010 Combining HMI technology with acid-resistant stainless steel construction, EXTER T150-st is suitable for food and beverage, oil and gas, and pharmaceutical industries. Front is waterproof, which enables cleaning with high-power water jets. Unit has neither foil nor labels on front so cracks and lines where bacteria and other pathogens might hide are minimized. With alarms, recipes, remote access, and multiple languages, panel helps ensure full control of machines and processes.

Gravograph - New Hermes Inc.    Duluth, GA 30096
May 12, 2010 Gravoply(TM) Laser materials feature matte finish and are designed for use with laser and rotary engraving machines. Allowing precise detail to be engraved, they are available in black, white, red, blue, yellow, and gold and in .05 and .030 in. thicknesses. Brushed or glossy finish is also available as well as adhesive backing. Products meet needs for interior signage, badges, labels, identification plates, and other applications.

Molex Inc.    Lisle, IL 60532-1682
May 12, 2010 Compatible with LED subassemblies across several industries, LED Printed Circuit Assemblies support rigid and flexible circuits used in packaging LED products. Proprietary BIN control ensures consistent lot-by-lot LED luminosity output ranges. Products support backlighting applications with polyester circuits that support lower-power consumption applications as well as heat-sinked polyimide and rigid boards to support high-power consumption applications.

Acromag, Inc.    Wixom, MI 48393 7037
May 12, 2010 Aiding development of measurement/control systems, AMRN/AMRX, for Modbus/RTU, and AMTN/AMTX, for Modbus/TCP, enable interface with Modbus slave device connected to PC's serial or network ports. They include timer for polled DAQ and floating point conversion control. Software tools AMRN/AMTN are .NET controls that communicate with devices linked to PC's serial/Ethernet port. Programs allow device access via test property page and automatically build command, send request, and validate response.

Delcam International Inc.    Windsor Ontario N8W 5J1, CD   Canada
May 12, 2010 To minimize need to transfer data between multiple programs, CopyCAD 2010 offers Tribrid Modeling, which adds triangle modeling to combination of surface and solid modeling. Integration of Parasolid means that CopyCAD can act as reverse engineering front end for all CAD systems based on Parasolid, including SolidWorks, Solid Edge®, and NXTM software. Version 2010 also includes algorithms for surface creation with boundaries or with drive curves, plus methods for inspection of complex parts.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
May 12, 2010 To provide access to real-time data, AMS Machinery Manager v5.4 integrates machinery health diagnostics between protection system, asset management software, and control system. It offers wireless access to spectral/waveform vibration diagnostics and allows data to be imported on demand or at scheduled intervals. Plant assets exceeding vibration thresholds are identified via Overall Vibration Index. Program also supports data from CSI 9420 Wireless Vibration Transmitter.

Agie Charmilles, LLC    Lincolnshire, IL 60069
May 12, 2010 Featuring polymer concrete, cube-shaped base and ribbed, cast iron worktable with axially arranged T-slots, Model HPM 1200 HD provides precision cutting of materials such as alloyed steel and aluminum. Vector controlled inline motor spindle permits full torque at low speed range, while pallet changer allows repetitive machining without interruption. With 60-position tool magazine and double arm gripper, dynamic milling center provides tool changes in 2 seconds.

INDEX Corporation    Noblesville, IN 46060
May 12, 2010 Accommodating simultaneous use of up to 3 tools on 2 spindles, TRAUB TNL18 can be changed over in minutes to produce precision parts with or without guide bush for long/short parts from bar up to 20 mm dia. It delivers precision and qualified surface finish in one operation, and tool capacity can be increased to 54 places via dual- and multi-holders. Also available, TNL18P production machine features Y-axis motion of upper turret mapped by interpolation of X/C/H axes.

IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
May 12, 2010 Installed with any industrial accelerometer, model 682A09 ICP® In-Line Vibration Transmitter converts vibration signal to 4-20 mA velocity output that can be trended with various control room systems. Unit has 2-pin MIL connector input and 3-pin MIL connector output. Operating off of loop-power from PLC, DCS, or SCADA system, it accepts 100 mV/g analog signal, which can be run to central collection point. Unit is suited for operation in harsh environments.

Pentek Inc.    Upper Saddle River, NJ 07458
May 12, 2010 With up to 4 TB of removable RAID storage and dual 200 MHz, 16-bit sampling channels in 4U rack-mount unit, Model RTS 2703 forms complete Windows XP workstation that can stand alone or connect to gigabit Ethernet network for remote access and control. Both sampling channels deliver nearly 90 dB of spurious free dynamic range and use same start, stop, triggering, and clock timing to ensure that data sets are synchronized. NTFS recording format simplifies file access and eliminates conversions.

Eriez Magnetics    Erie, PA 16514
May 12, 2010 Able to last indefinitely, P-REX delivers optimal separation capabilities for scrap recycling operations and uses no electricity. Permanent magnet extends to edge of drum for optimized separation efficiency, and there is no decline in performance due to heat rise. Also, there is no transfer/flip point drop in magnetic force; ferrous material is transferred and flipped between magnetic poles to promote cleaner product and optimized recovery.

McElroy Manufacturing, Inc.    Tulsa, OK 74158
May 12, 2010 Socket Tooling Kits provides contractors with Multi-Mc(TM) heater, heater sling, heater adapters, ratchet shears, chamfer tools/depth gauges, spare chamfer blade, and cold ring tools. Supplied in specially designed tool box with custom tray to hold components, kits help contractors perform focused work in diverse industries. There are 8 kits available, consisting of equipment geared to specific ranges of fitting sizes and heater voltage requirements.

OKW Enclosures, Inc    Bridgeville, PA 15017
May 12, 2010 Available for M, L, and XL SMART-CASE sizes, Desk/Charging Stations are molded in off-white or black ABS with contoured aperture in top for inserting case and knockouts on underside for data/power cable. Connections between station and case are provided by gold plated male and female contacts. Available in sizes ranging from 2.268 x 1.398 x 0.748 in. to 6.614 x 2.929 x 1.394 in., SMART-CASE enclosures can be fitted with IP65 sealing kit for outdoor applications.

Metalfab, Inc.    Vernon, NJ 07462-0009
May 12, 2010 Suited for continuous blending of 2 or more powders, pellets, or flakes, CB1 Blenders include 5 models with feed rates from 150-2,500 ft³/hr. Mixing blade design proportionally blends and mixes different types and varying densities of dry bulk materials fed from volumetric feeders at rate equal to total rates metered by feeders. Construction choices include carbon steel, carbon steel with special coatings, 304 or 316 stainless steel, or other specified materials.

Keyence Corporation of America    Itasca, IL 60143
May 12, 2010 With 16-bit imaging resolution, 65,536 brightness levels, and over 2.8 trillion colors, VHX-1000 Series performs real-time, on-screen measurement of distance, radius, angle, and area of target. DOUBLE'R automatic lens/zoom recognition system enables unit to recognize, in real-time, which lens is mounted to camera as well as current magnification. Compact 3CCD Camera includes pixel-shift actuator, achieving sharp, ultra-high resolution images of up to 54 million pixels.

Advanced Instruments, Inc.    Norwood, MA 02062
May 12, 2010 Approved by Lab Committee of the National Conference on Interstate Milk Shipments (NCIMS), SomaScope(TM) Smart incorporates flow cytometer and LED technology. LED illuminates stained cells in sample, and dual photomultiplier tubes detect cells. Resultingly, there are no warm-up wait times and no light source hot spots. Along with 30 sec analysis time, functional efficiency is promoted via wizard-driven software. Calibration exceeds IDF/ISO/FDA/NCIMS standards.

Warsaw Chemical Co.    Warsaw, IN 46581
May 12, 2010 Formula 567 Weather Shield® Tri-Color® Foam Polish contains surface reactive silicones and fluoro polymers that bond to vehicle surface for optimal shine, protection, and water break. Rinsing will not smear on glass or paint, and application helps reduce damage caused by UV light, acid rain, and oxidation. Meeting/exceeding all current green standards, product is reclaim compatible and comes in Sizzling Pink, Brilliant Blue, and Velocity Yellow with Green Apple scent.

General Manufacturing, Inc.    Bluffton, IN 46714
May 12, 2010 Stubby II® Cordless features eight ½ W LEDs on side for use as work light and lensed 1 W LED on end for use as flashlight. Rated at 50,000 hr, LEDs produce 5000K color light and contain no mercury. Included 7.2 V NiMH rechargeable battery pack will operate light continuously for 5 hr or all day with intermittent use. Unit includes 120 V smart charger, and internal circuitry maintains light level until just before battery needs recharging.

Weber Marking Systems, Inc.    Arlington Heights, IL 60005 4457
May 12, 2010 Designed for 32- and 64-bit operating systems, Legitronic® v3.6.4 features label design and printing functionality as well as RFID label encoding capabilities. Program offers advanced editing features, and to ease compliance with RFID requirements of retailers and government agencies, software supports encoding of EPC-compatible RFID labels to meet Gen 2 specifications. ODBC and OLE features ensure compatibility with many databases, word processing, and graphic design programs.