Ogura Industrial Corp.    Somerset, NJ 08873
Jul 05, 2011 Model CFB Centrifugal Brake can prevent doors from freefall condition that can cause personnel injury or property damage. In normal speed condition, springs hold back brake shoes and door can be raised or lowered normally. In over-speed condition, brake shoes are applied by centrifugal force, slowing door down. Brake does not require any external controls and/or power sources. Additional applications include conveyors, hose reels, wire unwinding, and over speed protection in windmills.

Glue Dots International, LLC    New Berlin, WI 53151
Jul 05, 2011 Used to apply Glue Dots Brand Adhesives, SD-900(TM) offers application flexibility. Continuous and intermittent application is supported in both vertical and horizontal orientations, and automatic speed matching ensures ±3/32 in. dot placement accuracy at rate of 300 applications/min. Number and sequence of Glue Dots being applied is adjustable via rotary switch. SD-900 is engineered to seamlessly integrate into both new and existing automated production lines.

Creative Materials Inc.    Ayer, MA 01432
Jul 05, 2011 Electrically conductive and electrically insulating adhesives for quartz oscillator circuits are suited for bonding leads onto quartz crystals and surface mount lid attachment. Electrically condictive products include flexible, medium- and low-viscosity solutions that can be screen printed or machine dispensed. Lid attachment products are optimized for thermal conductivity, thermal cycling, and minimal shrinkage.

Fluid Metering, Inc. (FMI)    Syosset, NY 11791
Jul 05, 2011 With 2D barcodes, OEM Pumps enable error-free data input and retrieval of critical pump parameters for applications requiring traceability for regulatory compliance, such as critical medical, diagnostic, analytical, and pharmaceutical applications. Labels contain information which uniquely identifies each pump, including serial number, part number, manufacturing date, and calibration data. Customer-defined parameters may also be included or substituted as well.

Craneware, Inc.    Atlanta, GA 30326
Jul 05, 2011 To help hospitals manage multiple physician operations, Physician Revenue Toolkit® - Corporate provides current information on Medicare and industry regulations and identifies missing or incorrect codes, descriptors, and invalid charges. Functionality lets users establish corporate chargemaster file to standardize aspects of physician charging for optimal operational efficiency and reimbursement as well as reduced compliance risk.

Dorf Ketal Chemicals LLC    Stafford, TX 77477
Jul 05, 2011 Without affecting ink color or gloss, acetylacetone-free Vertec(TM) IA-10 enhances ink adhesion as well as resistance to solvents and greases while also improving heat stability. Product is appropriate for inks used in packaging made with nitrocellulose, polyamide, and polyolefin films for food and consumer products. It is also recommended on NC-coated cellophane, OPP film, shellac-washed aluminum, pearlized polypropylene, and polyethylene-coated milk cartons.

Infragistics    East Windsor, NJ 08520
Jul 05, 2011 With NetAdvantage® for Windows Phone 2011 Volume 1, developers can create mobile applications full of visualizations with touch and gesture support. Program supports IG Theme and includes more than 12 data visualization controls such as Data Chart, Barcode, and Gauges. More than 20 interactive chart types, logarithmic scales, moving averages, and technical indicators like Trend Lines, Bollinger Bands, and Price Channels enable developers to optimize mobile end user experience.

MedeAnalytics, Inc.    Emeryville, CA 94608
Jul 05, 2011 Featuring adaptable workflow, Patient Access Intelligence 11 presents intelligent financial clearance work lists across facilities, departments, and individual users. Critical functions such as patient payment estimation, charity care screening, financial counseling, demographic validation, and insurance eligibility can be personalized across audiences, with intelligent rules aiding decision making. End-to-end audit trail and advanced analytics measure organizational performance.

Imaging Source LLC, The    Charlotte, NC 28226
Jul 05, 2011 Housed in aluminum casing, 2 Megapixel Industrial Cameras are available as monochrome and color variants, with or without IR cut filter. Units can output 15 frames/sec at resolution up to 1,600 x 1,200 pixels. With optional trigger input and digital I/O, cameras are suited for machine vision, automation, traffic surveillance, and quality control, as well as medicine, logistic, and security applications.

Men Micro Inc.    Lago Vista, TX 78645-4160
Jul 05, 2011 Rugged 3U cPCI Serial Ethernet Interface board, G211F, accommodates 4 fiber optic Ethernet transceiver channels (1000Base-SX) for connections over distances up to 1,800 ft. Connected to backplane via PCIe x4 link and managed via IEEE 802.3x-compliant Ethernet controller, board's 4 channels transfer data at up to 1,000 Mbps when used simultaneously. Full and half duplex operation are supported depending on chosen transceiver, and board may also be configured with 2 redundant channel pairs.

Power Technology, Inc.    Little Rock, AR 72219 1117
Jul 01, 2011 Rated at 20 mW, IQ Instrument Quality Green Laser Diode Module is designed to address needs of high-end OEM applications requiring stable wavelength and output power. Unit offers active temperature control, adjustable focus, and choice of beam circularization and modulated versions. Applications include laser-induced fluorescence, spectroscopy, data storage, flow cytometry, cancer detection, remote optical sensing, holography, and illumination.

Haydon Kerk Motion Solutions    Waterbury, CT 06705
Jul 01, 2011 Integrating electronic drive and fully programmable control unit with linear actuator, IDEA Drive Platform features single supply voltage of 12-48 Vdc, 2.6 Arms max rated current per phase, and 8 opto-isolated general purpose I/O. Inputs are rated for 5-24 Vdc, 4 mA max per input, while outputs are open collector, 5-24 Vdc, 200 mA max per output. Immune to electrical noise, RS-485 protocol lets device operate over 1,000 ft network without need for termination resistors.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Jul 01, 2011 Suited for hand test and temperature characterization as well as debugging in femtocell development, Model CBT-BGA-6015 has stamped spring pin contactor with 19 g actuation force per ball and cycle life of 500,000 insertions. Contactor features self inductance of 0.93 nH, insertion loss of less than 1 dB at 23.2 GHz, and contact resistance of less than 16 mW. Specific configuration of package to be tested in socket is BGA, 52.5 x 52.5 mm, 1 mm pitch, 2097 position, 51 x 51 ball array.

Krones AG    Franklin, WI 53132
Jul 01, 2011 Capable of handling PET-aseptics for mid-tier companies, PET-Asept D Compact is based on technology acceptance-tested by FDA and does not require any sterile-water UHT system in order to operate. Containers and isolator are steriziled with gaseous hydrogen peroxide; machine itself is cleaned using caustic and acid. Output range is 6,000-12,000 containers/hr, and machine can be installed as stand-alone line component or monobloc-synchronized with stretch blow-molding machine.

RF Precision Products    San Diego, CA 92126
Jul 01, 2011 Featuring triple shielding with low-loss dielectric and high-temperature jacketing, phase stable cables experience minimal phase effects when flexed multiple times. Connectors are made of stainless steel for extended attachment and feature strain relief support designed for armoring as option. Suited for applications up to 26.5 GHz, cables come in 24, 36, and 48 in. off-the-shelf lengths, and custom lengths are available.

Elemental LED    Emeryville, CA 94608
Jul 01, 2011 Available in both red and green, LED Exit Sign Replacement Kits include 2 ETL certified 12 Vdc LED bulbs with E26/27 candelabra base and 2 pairs of retrofit connectors that fit almost all exit sign models. Kits offer smooth, even light and exhibit no spotting, fading, flickering, or buzzing. Consuming 2.8 W, LEDs last approximately 80,000 hours, which is typically 8-10 years.

Nilfisk Industrial Vacuums    Morgantown, PA 19543
Jul 01, 2011 Comprised of 3-phase, continuous-duty vacuum cleaners constructed of heavy-duty steel and polypropylene, T-Series meets industrial demands of manufacturing facilities for collection of powders, liquids, dust, and debris. Manual filter shaker helps maintain max suction power, while release lever lowers wheeled collection container and acts as handle for disposal of collected debris. Optional HEPA filter ensures 99.995% of particles down to and including 0.18 microns are retained.

E Instruments International LLC    Langhorne, PA 19047
Jul 01, 2011 Featuring built-in hand pumps offering independent pneumatic and hydraulic calibration capabilities, PPC P/H Dual Portable Pressure Calibrator has respective pneumatic and hydraulic ranges up to 300 and 6,000 psi and overall accuracy of ±0.05% FS + 1 digit. Standard features, in addition to temperature compensation from 0 to 50°C, include low battery indicator, audio and visual alarms for over pressure, and rechargeable battery.

MICRO-EPSILON AMERICA    Raleigh, NC 27617
Jul 01, 2011 Used to measure gap width, capaNCDT CSG uses sensor electrodes and differential method to determine gap widths from 0.9-4.9 mm while moving sensor into gap. Sensor electrodes are applied to top front and back on 20 cm wide circuit board, and flexible probe enables sensor to be used in applications where measurement object is difficult to access. Also available, capaNCDT CSE offers 2.5X larger measuring range and is equipped with shielding electrode that is set back.

Gamewell-FCI    Northford, CT 06472
Jul 01, 2011 Designed to meet mass notification requirements of Local Operating Consoles as mandated by DoD in its Unified Facilities Criteria document 4-021-1, LOC-TEL utilizes telephone and 16 programmable switches to direct pre-recorded and live voice messages to any designated area within facility.