Honeywell
Golden Valley, MN 55422 3935
Oct 14, 2009 Operating from 3.3 or 5.0 Vdc, ASDX Series offers pressure ranges of 15, 30, and 100 psi and output options of ratiometric 12-bit analog, 12-bit I²C, or SPI digital. ASIC-based design provides accurate amplified condition pressure reading. Incorporating additional signal conditioning, sensors provide digital correction of offset, sensitivity, temperature coefficients, and non-linearity, and are intended for use with non-corrosive, non-iconic working fluids such as air and dry gases.

Honeywell
Golden Valley, MN 55422 3935
Oct 14, 2009 Respectively supplied in SOT-23 SMT and leaded, flat TO-92 packages, SS311PT and SS411P bipolar Hall-effect sensors operate from 2.7-7 Vdc supply voltage. Built-in pull-up resistor can interface with common electronic circuits and both models are operated by magnetic field from permanent magnet or electromagnet. They may be used in speed and RPM sensing, tachometers, flow-rate sensing, brushless dc motor commutation, motor/fan/robotics control, and counter pickup.

Rite-Hite Corp.
Milwaukee, WI 53224
Oct 14, 2009 With optimized head pad and head curtain designs, PLATINUM(TM) Series withstands abuses delivered by backing trailers. Headers have outer reinforcing of friction-resistant DURATHON(TM) fabric, which protects against extreme wear and tear. Double-reinforced corner-wear boots cover ends of header and upper side pads to protect areas most prone to damage. Consisting of triple-layer, reinforced foil technology, FIREFIGHTER(TM) heat-dissipation protection prevents heat buildup from trailer marker lights.

Littelfuse, Inc.
Des Plaines, IL 60016
Oct 14, 2009 Intended for over-current protection of PCBs, 160 Series 250 V time-lag, SMT fuse/clip assembly offers current ratings from 500 mA to 5 A, with maximum inrush current withstand of 127 A²s and interrupting rating of 50 A at 250 Vac. Unit measures 10.90 x 4.80 x 4.80 mm, and fuse clip holder prevents fuse from opening during momentary overloads. Assembly is RoHS compliant, halogen-free, and designed for LED lighting, lighting system, power converter, and telecom equipment.

LSI Computer Systems, Inc.
Melville, NY 11747
Oct 14, 2009 Models LS7082N1/LS7083N/LS7084N/LS7183N/LS7184N interface between incremental encoders and counting devices by converting encoder quadrature outputs into directional up/down clocks or clock and direction signals for driving counting devices. When interfaced with MCUs, devices can free up resources by relieving computational burden used for decoding quadrature signals. ICs offer x1, x2, or x4 frequency multiplication of quadrature clock as well as programmable output clock pulse width.

Proportion-Air, Inc.
McCordsville, IN 46055
Oct 14, 2009 Designed to help conserve energy used by air operated double diaphragm (AODD) pumps, MizAir® uses fuzzy logic to analyze each stroke of pump and learns its unique characteristics. This electro-pneumatic smart device automatically makes internal adjustments to reduce pump's air consumption, consequently reducing energy required to run pump with little to no effect on its throughput, fluid flow, or flow rate.

Weldcraft
Appleton, WI 54911
Oct 14, 2009 Designed for maneuverability, Crafter Series(TM) CS125A and CS200A models carry respective welding capacity ratings of 130 Adc/100 Aac and 200 Adc/150 Aac at 60% percent duty cycle. Torch body weight helps minimize welding operator fatigue, while D-Handle(TM) design lets operator orient torch by feel and improves overall torch control. Also, air-cooling capacity eliminates need for water-cooled systems and provides portability for field applications.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Oct 14, 2009 Series WMT multijet water meter with pulse output can handle wide flow ranges in low-flow commercial/industrial applications. Unit includes magnetically driven, hermetically sealed resistor, separated from register system and water, that will not leak or fog. Reed switch is activated via magnet on dial. Output, suitable for remote monitoring of flow rate or flow, can interface with PLC's, counters, data loggers, and SCADA systems.

Jet Edge
St. Michael, MN 55376
Oct 14, 2009 Capable of producing 2.0 gpm of ultra-high pressure, iP60-100, 100 hp, 60,000 psi pump suits precision waterjet cutting, water blasting, cleaning, and surface preparation applications. It features tie-rod design with no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder. Product features matched-metal components to prevent galling of hydraulic system components, and dual intensifiers for increased operating performance.

Dicon Fiberoptics Inc.
Richmond, CA 94804
Oct 14, 2009 Model GP750 is designed for automated fiber management setups in integrated test systems. Basic chassis comes with control module and power supply module that can be replaced with spares. System has slots that can accommodate up to 8 standard size plug-in units, and these units are designed for hot swappable operations. Control panel includes color display and navigation buttons. Plug-and-play status is shown on screen, and selection of slots and functions can be done via tiered control scheme.

PennEngineering
Danboro, PA 18916-1000
Oct 14, 2009 Featuring 2 separate clinch and knurl joining profiles, PEM® SpotFast® steel fastener (Type SFK) permanently joins metal sheets to PCBs or plastic panels and creates flush-attachment connection without protrusions on either side. It can also serve as pivot point, to allow top metal sheet to rotate freely. Available with various head sizes and diameters, RoHS compliant fastener can be used with metal sheets as thin as 0.8 mm with hardness of 80 or less on Rockwell B scale.

Crystek Corporation
Ft. Myers, FL 33913
Oct 14, 2009 Operating at 3,475 MHz with typical step size of 2,500 kHz, CPLL66-3475-3475 features typical phase noise of -95 dBc/Hz at 10 kHz offset with minimum output power of 3 dBm. It is programmed using standard 3 line interface (data, clock and load enable) and features second harmonic suppression of -15 dBc typical. Integrating VCO and PLL in single package, unit needs only external frequency reference and supply voltages of 3 V for PLL and 5 Vdc for VCO.

Westfalia Technologies, Inc.
York, PA 17402
Oct 14, 2009 Utilizing 4 x 4 pack pattern, Fractional Quart Carton Caser packs quart (1 L), pint (500 mL), and ½ pint (250 mL) cartons. Servo control load head adjusts to various fractions of quart size cartons, is height adjustable, and comes with dual in-feed carton conveyors, case conveyor, and line breaks. Constructed of stainless steel, caser suits wet environments found in dairy and beverage facilities. Options include conveyor extensions and motor controls for incoming conveyors.

Arcos Industries, LLC
Mount Carmel, PA 17851
Oct 14, 2009 Developed for welding components that operate at elevated temperatures, bare wire (ER90S-B9) Arcos 90S-B9 is available in diameters from .035 to 3/16 in. and is suited for use in power generation facilities as well as coal plants and oil refineries. Covered (E9015-B9) Arcos 9015-B9 is designed for high chromium alloyed 9CrMoNbV steel and can be used for welding heavy wall components such as headers and main steam piping. It is available in diameters from 3/32 to 3/16 in.

Artila Electronics,. Co., Ltd
Taipei 231  Taiwan
Oct 14, 2009 Powered by 400 MHz ATMEL ARM9 AT91SAM9G20 RISC CPU, Matrix-504 comes with 128 MB SDRAM, 128 MB NAMD Flash memory, and 2 MB DataFlash. System integrates one 10/100 Mbps Ethernet, 4 high speed RS-232/422/485 serial ports, and 2 USB hosts into compact 78 x 108 x 25 mm metal box, and comes with serial console port and DIN RAIL mounting kit. DataFlash includes backup Linux file system that will automatically boot Matrix-504 in case primary NAND Flash fails.

Master Bond, Inc.
Hackensack, NJ 07601
Oct 14, 2009 Designed to withstand severe and repeated thermal cycling, Master Bond EP46HT-1 has continuous service operating temperature range of -100 to +550°F and can withstand intermittent exposures up to 600°F. It has glass transition temperature of over 235°C and provides adhesion to metals, glass, vulcanized rubbers, and most plastics. Product cures rapidly at elevated temperatures, is 100% reactive, and does not contain any solvents or diluents. Hardened system is electrical insulator.

MKS
Andover, MA 01810 2449
Oct 14, 2009 Designed for pharmaceutical and high purity water systems, LIQUOZON® Ultra turn-key automated ozone injection system generates ozone, dissolves it into water, and delivers degassed and bubble-free ozone-enriched water. System is equipped with flow rate and ozone concentration controllers, ozone safety monitors, control panel with recorder to monitor quality, with optional TOC meter. Compact, skid-mounted system can handle water flows of 10-30 gpm with minimal pressure drop.

Trilithic, Inc.
Indianapolis, IN 46235
Oct 14, 2009 Measuring 0.5 x 0.5 x 2.00 in., compact LC BP pole placed bandpass filters pass 1,616.0-1,626.5 MHz band with maximum insertion loss of 2.6 dB, while providing minimum of 15 dB of isolation at GPS L1 and 70 dB minimum at GPS L2. They also provide 45 dB of isolation at 1,710-1,850 MHz band and 55 dB beyond that out to 10 GHz. Available in connectorized and PCB mount versions, filters with rugged construction are suited for variety of airborne applications including UAV/UAS platforms.

J. W. Winco, Inc.
New Berlin, WI 53151
Oct 14, 2009 Series No. 909EG7 "tool boy" ball-ended hex key sets include metric size 2.5, 3, 4, 5, 6, 8, and 10 keys of chrome-vanadium steel, hardened and nickel plated. Handle is constructed of ergonomically designed two-piece housing of black and red cadmium-free plastic.

Digi International
Minnetonka, MN 55343
Oct 14, 2009 Operating on ORBCOMM low-earth orbit satellite network, Digi m10 JumpStart Kit enables M2M communications with global coverage capability, allowing companies to monitor and manage remote assets deployed in locations where cellular or other land-based communications are not available. Satellite modem is built on mixed signal ASIC and offers design integration through serial interface. It supports industrial temperature and operational shock/vibration specifications exceeding SAE J1455.